connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1005411/tftp-deploy-8ng2cq48/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1005411/tftp-deploy-8ng2cq48/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1005411/tftp-deploy-8ng2cq48/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1005411/tftp-deploy-8ng2cq48/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1005411/tftp-deploy-8ng2cq48/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1005411/tftp-deploy-8ng2cq48/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 8a:7f:d6:24:bb:5a T eth0: DHCP client bound to address 10.8.254.123 Loading ARM Linux zImage '/mnt/tftp/1005411/tftp-deploy-8ng2cq48/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1393d000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1005411/tftp-deploy-8ng2cq48/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189fcad9 Loading devicetree from '/mnt/tftp/1005411/tftp-deploy-8ng2cq48/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x1393d000, initrd at 0x18000000, oftree at 0x189fd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.59-cip8 (KernelCI@build-j83117-arm-gcc-10-imx-v6-v7-defconfig-lczv2) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Oct 27 13:00:09 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s38452 r8192 d22988 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971284K/2097152K available (15360K kernel code, 2192K rwdata, 5548K rodata, 1024K init, 6676K bss, 60332K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000023] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002096] Console: colour dummy device 80x30 [ 0.002171] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002182] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002193] ... MAX_LOCK_DEPTH: 48 [ 0.002202] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002213] ... CLASSHASH_SIZE: 4096 [ 0.002222] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002232] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002242] ... CHAINHASH_SIZE: 32768 [ 0.002252] memory used by lock dependency info: 4061 kB [ 0.002263] memory used for stack traces: 2112 kB [ 0.002272] per task-struct memory footprint: 1536 bytes [ 0.002382] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002411] CPU: Testing write buffer coherency: ok [ 0.002575] CPU0: Spectre v2: using BPIALL workaround [ 0.002590] pid_max: default: 32768 minimum: 301 [ 0.003220] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003255] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.008664] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012200] cblist_init_generic: Setting adjustable number of callback queues. [ 0.012219] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.012585] Running RCU-tasks wait API self tests [ 0.012918] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.013547] Callback from call_rcu_tasks_trace() invoked. [ 0.013805] rcu: Hierarchical SRCU implementation. [ 0.013817] rcu: Max phase no-delay instances is 1000. [ 0.016670] smp: Bringing up secondary CPUs ... [ 0.020024] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020047] CPU1: Spectre v2: using BPIALL workaround [ 0.023485] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023507] CPU2: Spectre v2: using BPIALL workaround [ 0.026200] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.026221] CPU3: Spectre v2: using BPIALL workaround [ 0.026651] smp: Brought up 1 node, 4 CPUs [ 0.026673] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026691] CPU: All CPU(s) started in SVC mode. [ 0.029938] devtmpfs: initialized [ 0.066133] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.068472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.068545] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.072681] pinctrl core: initialized pinctrl subsystem [ 0.078998] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.103163] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.108244] thermal_sys: Registered thermal governor 'step_wise' [ 0.108594] cpuidle: using governor menu [ 0.108857] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.127181] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 [ 0.167873] platform 20e0000.pinctrl: Fixed dependency cycle(s) with /soc/bus@2000000/pinctrl@20e0000/imx6qdl-wandboard/hoggrp [ 0.182796] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@0/endpoint [ 0.182985] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@0/endpoint [ 0.188339] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@1/endpoint [ 0.188478] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@0/endpoint [ 0.188657] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@2/endpoint [ 0.188832] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@2/endpoint [ 0.192378] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@3/endpoint [ 0.192838] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@2/endpoint [ 0.193149] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@2/endpoint [ 0.193481] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@3/endpoint [ 0.204442] No ATAGs? [ 0.204951] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.205000] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.210482] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.260505] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.334251] SCSI subsystem initialized [ 0.336083] usbcore: registered new interface driver usbfs [ 0.336476] usbcore: registered new interface driver hub [ 0.336636] usbcore: registered new device driver usb [ 0.337026] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.337850] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.338339] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.339018] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.343269] i2c i2c-0: IMX I2C adapter registered [ 0.348069] i2c 1-003c: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@0/endpoint [ 0.349592] i2c i2c-1: IMX I2C adapter registered [ 0.354801] i2c i2c-2: IMX I2C adapter registered [ 0.355408] mc: Linux media interface: v0.10 [ 0.355648] videodev: Linux video capture interface: v2.00 [ 0.357342] pps_core: LinuxPPS API ver. 1 registered [ 0.357358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.357419] PTP clock support registered [ 0.360132] Advanced Linux Sound Architecture Driver Initialized. [ 0.364781] Bluetooth: Core ver 2.22 [ 0.364905] NET: Registered PF_BLUETOOTH protocol family [ 0.364919] Bluetooth: HCI device and connection manager initialized [ 0.365034] Bluetooth: HCI socket layer initialized [ 0.365067] Bluetooth: L2CAP socket layer initialized [ 0.365226] Bluetooth: SCO socket layer initialized [ 0.368108] vgaarb: loaded [ 1.430348] clocksource: Switched to clocksource mxc_timer1 [ 1.434350] VFS: Disk quotas dquot_6.6.0 [ 1.434532] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.472556] NET: Registered PF_INET protocol family [ 1.473566] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.476841] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 1.476960] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.477050] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.477763] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) [ 1.479971] TCP: Hash tables configured (established 8192 bind 8192) [ 1.480796] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 1.481014] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 1.481628] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.483935] RPC: Registered named UNIX socket transport module. [ 1.483984] RPC: Registered udp transport module. [ 1.484000] RPC: Registered tcp transport module. [ 1.484012] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.485784] PCI: CLS 0 bytes, default 64 [ 1.487502] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.488530] Trying to unpack rootfs image as initramfs... [ 1.501039] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.508809] Initialise system trusted keyrings [ 1.509837] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.535301] NFS: Registering the id_resolver key type [ 1.535533] Key type id_resolver registered [ 1.535581] Key type id_legacy registered [ 1.535928] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.536050] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.536251] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.537707] fuse: init (API version 7.37) [ 1.632377] Key type asymmetric registered [ 1.632583] Asymmetric key parser 'x509' registered [ 1.633315] bounce: pool size: 64 pages [ 1.633785] io scheduler mq-deadline registered [ 1.633813] io scheduler kyber registered [ 1.656389] mxs-dma 110000.dma-apbh: initialized [ 1.672521] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.673568] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.673589] pfuze100-regulator 2-0008: pfuze100 found. [ 1.711715] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 268, base_baud = 5000000) is a IMX [ 2.770098] printk: console [ttymxc0] enabled [ 2.779070] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 269, base_baud = 5000000) is a IMX [ 2.806596] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.823043] Freeing initrd memory: 10228K [ 2.845491] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.852179] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.858599] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.864410] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.871965] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.878210] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.884405] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.893839] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 2.913413] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.923632] Stack Depot allocating hash table of 65536 entries with kvcalloc [ 2.936096] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.944168] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.952311] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.960290] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.968820] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.980042] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.990332] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 2.998941] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 3.006136] imx-ipuv3 2800000.ipu: IPUv3H probed [ 3.049376] brd: module loaded [ 3.083700] loop: module loaded [ 3.089686] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 3.097701] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 3.105793] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 3.114050] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 3.122050] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 3.130103] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 3.137777] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 3.149087] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 3.156189] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.165064] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.178963] scsi host0: ahci-imx [ 3.184112] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 282 [ 3.205823] CAN device driver interface [ 3.218006] pps pps0: new PPS source ptp0 [ 3.268783] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.277228] usbcore: registered new interface driver r8152 [ 3.282917] usbcore: registered new interface driver lan78xx [ 3.288777] usbcore: registered new interface driver asix [ 3.294362] usbcore: registered new interface driver ax88179_178a [ 3.300652] usbcore: registered new interface driver cdc_ether [ 3.306658] usbcore: registered new interface driver smsc95xx [ 3.312576] usbcore: registered new interface driver net1080 [ 3.318359] usbcore: registered new interface driver cdc_subset [ 3.324467] usbcore: registered new interface driver zaurus [ 3.330170] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 3.337820] usbcore: registered new interface driver cdc_ncm [ 3.343656] usbcore: registered new interface driver r8153_ecm [ 3.349809] usbcore: registered new interface driver usb-storage [ 3.365586] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 3.371876] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 3.378080] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 3.384334] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 3.402972] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.409282] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 3.418954] i2c_dev: i2c /dev entries driver [ 3.439336] Bluetooth: HCI UART driver ver 2.3 [ 3.443876] Bluetooth: HCI UART protocol H4 registered [ 3.449127] Bluetooth: HCI UART protocol LL registered [ 3.457878] sdhci: Secure Digital Host Controller Interface driver [ 3.464139] sdhci: Copyright(c) Pierre Ossman [ 3.468517] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.477741] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.480652] caam 2100000.crypto: Entropy delay = 3200 [ 3.490388] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.526545] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.534066] ata1: SATA link down (SStatus 0 SControl 300) [ 3.540350] ahci-imx 2200000.sata: no device found, disabling link. [ 3.546685] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.548692] caam 2100000.crypto: Instantiated RNG4 SH0 [ 3.588696] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.599368] mmc0: new high speed SDHC card at address 1234 [ 3.609041] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.609455] caam 2100000.crypto: Instantiated RNG4 SH1 [ 3.619326] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 3.626069] caam 2100000.crypto: job rings = 2, qi = 0 [ 3.640412] caam algorithms registered in /proc/crypto [ 3.646122] caam 2100000.crypto: registering rng-caam [ 3.653947] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.661066] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.671796] caam 2100000.crypto: rng crypto API alg registered prng-caam [ 3.683051] usbcore: registered new interface driver usbhid [ 3.688655] usbhid: USB HID core driver [ 3.697174] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 3.707035] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 3.715742] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 3.724667] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 3.733802] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as /dev/video4 [ 3.742522] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as /dev/video5 [ 3.750961] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as /dev/video6 [ 3.759775] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as /dev/video7 [ 3.769019] imx6-mipi-csi2 21dc000.mipi: Consider updating driver imx6-mipi-csi2 to match on endpoints [ 3.769424] mmc2: new DDR MMC card at address 0001 [ 3.785637] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.797390] mmcblk2: p1 p2 [ 3.803229] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.804091] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.814286] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.820355] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.833854] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (243:0) [ 3.852841] random: crng init done [ 3.875337] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.894957] NET: Registered PF_INET6 protocol family [ 3.905476] Segment Routing with IPv6 [ 3.909221] In-situ OAM (IOAM) with IPv6 [ 3.913406] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.922137] NET: Registered PF_PACKET protocol family [ 3.927227] can: controller area network core [ 3.932020] NET: Registered PF_CAN protocol family [ 3.936845] can: raw protocol [ 3.939982] can: broadcast manager protocol [ 3.944290] can: netlink gateway - max_hops=1 [ 3.949184] Key type dns_resolver registered [ 3.968504] Registering SWP/SWPB emulation handler [ 3.974352] Loading compiled-in X.509 certificates [ 4.158628] imx_usb 2184200.usb: No over current polarity defined [ 4.170582] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.176007] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 4.210743] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.220604] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 4.229265] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.236594] usb usb1: Product: EHCI Host Controller [ 4.241539] usb usb1: Manufacturer: Linux 6.1.59-cip8 ehci_hcd [ 4.247392] usb usb1: SerialNumber: ci_hdrc.1 [ 4.255886] hub 1-0:1.0: USB hub found [ 4.259976] hub 1-0:1.0: 1 port detected [ 4.269698] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating driver video-mux to match on endpoints [ 4.282911] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating driver video-mux to match on endpoints [ 4.299976] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.316188] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.333357] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.348733] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.416308] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.424416] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.433273] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 4.433566] ALSA device list: [ 4.444462] No soundcards found. [ 4.451895] Freeing unused kernel image (initmem) memory: 1024K [ 4.512112] Run /init as init process [ 4.550423] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK [ 4.762140] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 4.770692] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.777910] usb 1-1: Product: USB2.0 Hub [ 4.781908] usb 1-1: Manufacturer: GenesysLogic [ 4.793654] hub 1-1:1.0: USB hub found Starting klogd: [ 4.798417] hub 1-1:1.0: 4 ports detected OK [ 4.822371] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW Running sysctl: OK Populating /dev using udev: [ 4.926589] udevd[219]: starting version 3.2.9 [ 4.949012] udevd[219]: specified user 'tss' unknown [ 4.954316] udevd[219]: specified group 'tss' unknown [ 4.967624] udevd[220]: starting eudev-3.2.9 [ 5.589818] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.645263] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.656747] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.665397] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 5.688948] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 5.699537] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 5.761608] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.902806] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 5.910647] ov5645 1-003c: could not set init registers [ 5.929128] ov5645 1-003c: could not power up OV5645 [ 5.935324] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1005411/environment . /lava-1005411/environment / # /lava-1005411/bin/lava-test-runner /lava-1005411/0 /lava-1005411/bin/lava-test-runner /lava-1005411/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1005411/0/tests/0_dmesg + cat uuid + UUID=1005411_1.5.2.3.1[ 7.260967] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.376864] [ 7.482657] [ 7.587142] + set +x [ 7.598287] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1005411/environment / # . /lava-1005411/environment/lava-1005411/bin/lava-test-runner /lava-1005411/1 / # /lava-1005411/bin/lava-test-runner /lava-1005411/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1005411/1/tests/1_bootrr + cat uuid + UUID=1005411_1.5.2.3.5[ 8.212928] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1005411/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1005411/1/../bin/lava-test-case [ 8.368023] /lava-1005411/1/../bin/lava-test-case [ 8.478357] /lava-1005411/1/../bin/lava-test-case [ 8.538410] + set +x [ 8.580685] / #