connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1031565/tftp-deploy-b3ukvxd1/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031565/tftp-deploy-b3ukvxd1/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1031565/tftp-deploy-b3ukvxd1/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1031565/tftp-deploy-b3ukvxd1/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1031565/tftp-deploy-b3ukvxd1/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1031565/tftp-deploy-b3ukvxd1/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 92:b0:4a:7b:ec:c5 T eth0: DHCP client bound to address 10.8.254.48 Loading ARM Linux zImage '/mnt/tftp/1031565/tftp-deploy-b3ukvxd1/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1394d000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1031565/tftp-deploy-b3ukvxd1/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189fce70 Loading devicetree from '/mnt/tftp/1031565/tftp-deploy-b3ukvxd1/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x1394d000, initrd at 0x18000000, oftree at 0x189fd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.80-cip16 (KernelCI@build-j128936-arm-gcc-10-imx-v6-v7-defconfig-46tmm) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sun Mar 3 11:01:42 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 18 pages/cpu s41524 r8192 d24012 u73728 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971268K/2097152K available (15360K kernel code, 2193K rwdata, 5440K rodata, 1024K init, 6675K bss, 60348K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000026] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002054] Console: colour dummy device 80x30 [ 0.002132] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002145] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002155] ... MAX_LOCK_DEPTH: 48 [ 0.002165] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002175] ... CLASSHASH_SIZE: 4096 [ 0.002184] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002194] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002204] ... CHAINHASH_SIZE: 32768 [ 0.002215] memory used by lock dependency info: 4061 kB [ 0.002225] memory used for stack traces: 2112 kB [ 0.002235] per task-struct memory footprint: 1536 bytes [ 0.002342] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002370] CPU: Testing write buffer coherency: ok [ 0.002539] CPU0: Spectre v2: using BPIALL workaround [ 0.002554] pid_max: default: 32768 minimum: 301 [ 0.003187] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003222] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.008615] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012098] cblist_init_generic: Setting adjustable number of callback queues. [ 0.012115] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.012482] Running RCU-tasks wait API self tests [ 0.012812] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.013445] Callback from call_rcu_tasks_trace() invoked. [ 0.013693] rcu: Hierarchical SRCU implementation. [ 0.013706] rcu: Max phase no-delay instances is 1000. [ 0.016519] smp: Bringing up secondary CPUs ... [ 0.019745] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.019769] CPU1: Spectre v2: using BPIALL workaround [ 0.023236] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023259] CPU2: Spectre v2: using BPIALL workaround [ 0.025926] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025947] CPU3: Spectre v2: using BPIALL workaround [ 0.026375] smp: Brought up 1 node, 4 CPUs [ 0.026396] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026413] CPU: All CPU(s) started in SVC mode. [ 0.029322] devtmpfs: initialized [ 0.065388] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.067704] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067775] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.071959] pinctrl core: initialized pinctrl subsystem [ 0.078251] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.101905] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.106906] thermal_sys: Registered thermal governor 'step_wise' [ 0.107248] cpuidle: using governor menu [ 0.107470] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.124712] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 [ 0.161247] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 [ 0.164358] platform 20e0000.pinctrl: Fixed dependency cycle(s) with /soc/bus@2000000/pinctrl@20e0000/imx6qdl-wandboard/hoggrp [ 0.197472] No ATAGs? [ 0.198002] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.198051] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.203422] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.252457] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.319437] SCSI subsystem initialized [ 0.321253] usbcore: registered new interface driver usbfs [ 0.321495] usbcore: registered new interface driver hub [ 0.321656] usbcore: registered new device driver usb [ 0.322035] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.322890] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.323349] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.324001] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.328291] i2c i2c-0: IMX I2C adapter registered [ 0.333423] i2c i2c-1: IMX I2C adapter registered [ 0.338376] i2c i2c-2: IMX I2C adapter registered [ 0.338966] mc: Linux media interface: v0.10 [ 0.339202] videodev: Linux video capture interface: v2.00 [ 0.339784] pps_core: LinuxPPS API ver. 1 registered [ 0.339799] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.339856] PTP clock support registered [ 0.342513] Advanced Linux Sound Architecture Driver Initialized. [ 0.348607] Bluetooth: Core ver 2.22 [ 0.348735] NET: Registered PF_BLUETOOTH protocol family [ 0.348748] Bluetooth: HCI device and connection manager initialized [ 0.348858] Bluetooth: HCI socket layer initialized [ 0.348889] Bluetooth: L2CAP socket layer initialized [ 0.349048] Bluetooth: SCO socket layer initialized [ 0.351860] vgaarb: loaded [ 0.356245] clocksource: Switched to clocksource mxc_timer1 [ 0.359917] VFS: Disk quotas dquot_6.6.0 [ 0.360085] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.393492] NET: Registered PF_INET protocol family [ 0.394469] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.398382] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 0.398504] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.398547] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.398874] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) [ 0.401107] TCP: Hash tables configured (established 8192 bind 8192) [ 0.401758] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.401971] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.402630] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.404867] RPC: Registered named UNIX socket transport module. [ 0.404917] RPC: Registered udp transport module. [ 0.404932] RPC: Registered tcp transport module. [ 0.404944] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.406722] PCI: CLS 0 bytes, default 64 [ 0.408571] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 0.409873] Trying to unpack rootfs image as initramfs... [ 0.423201] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.430312] Initialise system trusted keyrings [ 0.431243] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.456379] NFS: Registering the id_resolver key type [ 0.456604] Key type id_resolver registered [ 0.456653] Key type id_legacy registered [ 0.456990] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.457094] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.457281] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.458687] fuse: init (API version 7.37) [ 0.554671] Key type asymmetric registered [ 0.554881] Asymmetric key parser 'x509' registered [ 0.555609] bounce: pool size: 64 pages [ 0.556036] io scheduler mq-deadline registered [ 0.556058] io scheduler kyber registered [ 0.587165] mxs-dma 110000.dma-apbh: initialized [ 0.602798] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 0.603822] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 0.603843] pfuze100-regulator 2-0008: pfuze100 found. [ 0.640518] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 268, base_baud = 5000000) is a IMX [ 1.591777] printk: console [ttymxc0] enabled [ 1.600864] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 269, base_baud = 5000000) is a IMX [ 1.625899] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 1.664301] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 1.671195] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 1.677879] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 1.683612] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 1.691823] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 1.698208] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 1.704357] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 1.715005] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 1.728579] Freeing initrd memory: 10228K [ 1.735323] imx-ipuv3 2400000.ipu: IPUv3H probed [ 1.744541] Stack Depot allocating hash table of 65536 entries with kvcalloc [ 1.757102] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 1.765068] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 1.773242] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 1.781332] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 1.789996] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 1.801081] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 1.811401] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 1.820316] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 1.827521] imx-ipuv3 2800000.ipu: IPUv3H probed [ 1.869131] brd: module loaded [ 1.903257] loop: module loaded [ 1.909252] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 1.917279] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 1.925316] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 1.933568] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 1.941562] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 1.949681] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 1.957388] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 1.968701] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 1.975713] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.984616] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 1.998873] scsi host0: ahci-imx [ 2.003879] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 282 [ 2.025307] CAN device driver interface [ 2.037468] pps pps0: new PPS source ptp0 [ 2.088139] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.096582] usbcore: registered new device driver r8152-cfgselector [ 2.103039] usbcore: registered new interface driver r8152 [ 2.108744] usbcore: registered new interface driver lan78xx [ 2.114567] usbcore: registered new interface driver asix [ 2.120173] usbcore: registered new interface driver ax88179_178a [ 2.126469] usbcore: registered new interface driver cdc_ether [ 2.132486] usbcore: registered new interface driver smsc95xx [ 2.138404] usbcore: registered new interface driver net1080 [ 2.144187] usbcore: registered new interface driver cdc_subset [ 2.150274] usbcore: registered new interface driver zaurus [ 2.155989] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.163630] usbcore: registered new interface driver cdc_ncm [ 2.169460] usbcore: registered new interface driver r8153_ecm [ 2.175576] usbcore: registered new interface driver usb-storage [ 2.191169] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 2.197450] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 2.203653] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 2.209899] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 2.228292] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 2.234609] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 2.244250] i2c_dev: i2c /dev entries driver [ 2.263995] Bluetooth: HCI UART driver ver 2.3 [ 2.268552] Bluetooth: HCI UART protocol H4 registered [ 2.273796] Bluetooth: HCI UART protocol LL registered [ 2.282462] sdhci: Secure Digital Host Controller Interface driver [ 2.288715] sdhci: Copyright(c) Pierre Ossman [ 2.293098] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.302386] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 2.306552] caam 2100000.crypto: Entropy delay = 3200 [ 2.309649] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 2.338412] ata1: SATA link down (SStatus 0 SControl 300) [ 2.344502] ahci-imx 2200000.sata: no device found, disabling link. [ 2.350863] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.352682] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 2.359616] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 2.372153] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 2.373299] caam 2100000.crypto: Instantiated RNG4 SH0 [ 2.408000] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.418568] mmc0: new high speed SDHC card at address 1234 [ 2.428517] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.434061] caam 2100000.crypto: Instantiated RNG4 SH1 [ 2.439310] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 2.445958] caam 2100000.crypto: job rings = 2, qi = 0 [ 2.460107] caam algorithms registered in /proc/crypto [ 2.465746] caam 2100000.crypto: registering rng-caam [ 2.496454] caam 2100000.crypto: rng crypto API alg registered prng-caam [ 2.508181] usbcore: registered new interface driver usbhid [ 2.511251] mmc2: new DDR MMC card at address 0001 [ 2.513782] usbhid: USB HID core driver [ 2.521579] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 2.527778] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 2.535653] mmcblk2: p1 p2 [ 2.539279] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 2.542591] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 2.548072] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 2.559742] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 2.561239] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 2.571541] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (243:0) [ 2.573823] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as /dev/video4 [ 2.587763] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as /dev/video5 [ 2.596179] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as /dev/video6 [ 2.604919] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as /dev/video7 [ 2.614182] imx6-mipi-csi2 21dc000.mipi: Consider updating driver imx6-mipi-csi2 to match on endpoints [ 2.644721] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 2.655667] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 2.677392] random: crng init done [ 2.716041] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 2.735329] NET: Registered PF_INET6 protocol family [ 2.745902] Segment Routing with IPv6 [ 2.749742] In-situ OAM (IOAM) with IPv6 [ 2.753828] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.762494] NET: Registered PF_PACKET protocol family [ 2.767639] can: controller area network core [ 2.772227] NET: Registered PF_CAN protocol family [ 2.777135] can: raw protocol [ 2.780276] can: broadcast manager protocol [ 2.784515] can: netlink gateway - max_hops=1 [ 2.789445] Key type dns_resolver registered [ 2.808920] Registering SWP/SWPB emulation handler [ 2.814723] Loading compiled-in X.509 certificates [ 2.997252] imx_usb 2184200.usb: No over current polarity defined [ 3.008801] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.014263] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.046850] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.056459] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.065123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.072594] usb usb1: Product: EHCI Host Controller [ 3.077642] usb usb1: Manufacturer: Linux 6.1.80-cip16 ehci_hcd [ 3.083621] usb usb1: SerialNumber: ci_hdrc.1 [ 3.094326] hub 1-0:1.0: USB hub found [ 3.098479] hub 1-0:1.0: 1 port detected [ 3.108364] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating driver video-mux to match on endpoints [ 3.120185] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating driver video-mux to match on endpoints [ 3.136343] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.154484] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.174041] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.188962] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.254880] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.264438] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.274411] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.280459] ALSA device list: [ 3.283263] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.286628] No soundcards found. [ 3.301678] Freeing unused kernel image (initmem) memory: 1024K [ 3.357925] Run /init as init process [ 3.406367] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 3.660069] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 3.668606] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.675873] usb 1-1: Product: USB2.0 Hub [ 3.679889] usb 1-1: Manufacturer: GenesysLogic [ 3.689811] hub 1-1:1.0: USB hub found [ 3.695274] hub 1-1:1.0: 4 ports detected OK Populating /dev using udev: [ 3.716917] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.741025] udevd[217]: starting version 3.2.9 [ 3.760273] udevd[217]: specified user 'tss' unknown [ 3.765445] udevd[217]: specified group 'tss' unknown [ 3.778467] udevd[218]: starting eudev-3.2.9 [ 4.373303] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.434364] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 4.443004] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 4.451334] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.614517] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.617267] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.625132] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.647362] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 4.655083] ov5645 1-003c: could not set init registers [ 4.666834] ov5645 1-003c: could not power up OV5645 [ 4.801599] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1031565/environment . /lava-1031565/environment / # /lava-1031565/bin/lava-test-runner /lava-1031565/0 /lava-1031565/bin/lava-test-runner /lava-1031565/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1031565/0/tests/0_dmesg + cat uuid + UUID=1031565_1.5.2.3.1[ 6.111841] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.229686] [ 6.336421] [ 6.435462] + set +x [ 6.446785] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1031565/environment / # . /lava-1031565/environment/lava-1031565/bin/lava-test-runner /lava-1031565/1 / # /lava-1031565/bin/lava-test-runner /lava-1031565/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1031565/1/tests/1_bootrr + cat uuid + UUID=1031565_1.5.2.3.5[ 7.062262] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1031565/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1031565/1/../bin/lava-test-case [ 7.218803] /lava-1031565/1/../bin/lava-test-case [ 7.328107] /lava-1031565/1/../bin/lava-test-case [ 7.386879] + set +x [ 7.428233] / #