[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.201.22 (762 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 13248491/tftp-deploy-fefgkmdk/kernel/zImage tftp 0x2000000 13248491/tftp-deploy-fefgkmdk/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13248491/tftp-deploy-fefgkmdk/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ## 3.5 MiB/s done Bytes transferred = 10523136 (a09200 hex) => tftp 0x4000000 13248491/tftp-deploy-fefgkmdk/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 13248491/tftp-deploy-fefgkmdk/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13248491/tftp-deploy-fefgkmdk/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# # 3.7 MiB/s done Bytes transferred = 17176157 (106165d hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 13248491/tftp-deploy-fefgkmdk/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 13248491/tftp-deploy-fefgkmdk/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13248491/tftp-deploy-fefgkmdk/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 3.1 MiB/s done Bytes transferred = 41716 (a2f4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0xa09200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17176093 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2f3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 6.1.83-cip18 (KernelCI@build-j154458-arm-gcc-10-multi-v7-defconfig-2dnjt) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Apr 3 23:04:42 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1970752K/2097152K available (14336K kernel code, 2470K rwdata, 6212K rodata, 2048K init, 427K bss, 60864K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009082] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023437] Console: colour dummy device 80x30 <6>[ 0.028654] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040327] CPU: Testing write buffer coherency: ok <6>[ 0.046005] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.051850] pid_max: default: 32768 minimum: 301 <6>[ 0.057384] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.065725] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.075474] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.083102] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.092256] rcu: Hierarchical SRCU implementation. <6>[ 0.097803] rcu: Max phase no-delay instances is 1000. <6>[ 0.108746] EFI services will not be available. <6>[ 0.114371] smp: Bringing up secondary CPUs ... <6>[ 0.121444] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.121464] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.135762] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.135781] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.150015] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.150035] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.162488] smp: Brought up 1 node, 4 CPUs <6>[ 0.167305] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.174474] CPU: All CPU(s) started in SVC mode. <6>[ 0.180480] devtmpfs: initialized <6>[ 0.193790] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.202750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.213867] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.223713] pinctrl core: initialized pinctrl subsystem <6>[ 0.233661] DMI not present or invalid. <6>[ 0.239008] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.248149] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.258980] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.259049] cpuidle: using governor menu <6>[ 0.271201] No ATAGs? <6>[ 0.274119] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.283225] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.293404] Serial: AMBA PL011 UART driver <6>[ 0.322241] platform ff940000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.330764] platform ff930000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.339245] platform ff980000.hdmi: Fixed dependency cycle(s) with /vop@ff940000 <6>[ 0.347756] platform ff980000.hdmi: Fixed dependency cycle(s) with /vop@ff930000 <6>[ 0.371846] rockchip-gpio ff750000.gpio: probed /pinctrl/gpio@ff750000 <6>[ 0.380073] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 <6>[ 0.388254] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 <6>[ 0.396460] rockchip-gpio ff7a0000.gpio: probed /pinctrl/gpio@ff7a0000 <6>[ 0.404716] rockchip-gpio ff7b0000.gpio: probed /pinctrl/gpio@ff7b0000 <6>[ 0.412918] rockchip-gpio ff7c0000.gpio: probed /pinctrl/gpio@ff7c0000 <6>[ 0.421095] rockchip-gpio ff7d0000.gpio: probed /pinctrl/gpio@ff7d0000 <6>[ 0.429295] rockchip-gpio ff7e0000.gpio: probed /pinctrl/gpio@ff7e0000 <6>[ 0.437466] rockchip-gpio ff7f0000.gpio: probed /pinctrl/gpio@ff7f0000 <6>[ 0.477306] iommu: Default domain type: Translated <6>[ 0.482952] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.491051] SCSI subsystem initialized <6>[ 0.495955] usbcore: registered new interface driver usbfs <6>[ 0.502347] usbcore: registered new interface driver hub <6>[ 0.508508] usbcore: registered new device driver usb <6>[ 0.517002] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.522739] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.533088] PTP clock support registered <6>[ 0.537934] EDAC MC: Ver: 3.0.0 <6>[ 0.545409] vgaarb: loaded <6>[ 0.554193] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.574541] NET: Registered PF_INET protocol family <6>[ 0.580441] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.591231] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.600735] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.609550] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.618424] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.627029] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.634393] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.641988] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.650222] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.657336] RPC: Registered named UNIX socket transport module. <6>[ 0.664125] RPC: Registered udp transport module. <6>[ 0.669600] RPC: Registered tcp transport module. <6>[ 0.675062] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.682421] PCI: CLS 0 bytes, default 64 <6>[ 0.688272] Trying to unpack rootfs image as initramfs... <6>[ 0.701467] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 0.712618] Initialise system trusted keyrings <6>[ 0.718736] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 0.733407] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.741793] NFS: Registering the id_resolver key type <5>[ 0.747705] Key type id_resolver registered <5>[ 0.752585] Key type id_legacy registered <6>[ 0.757440] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.765108] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 0.773552] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 0.779217] Key type asymmetric registered <5>[ 0.784006] Asymmetric key parser 'x509' registered <6>[ 0.789856] bounce: pool size: 64 pages <6>[ 0.794504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 0.802913] io scheduler mq-deadline registered <6>[ 0.808189] io scheduler kyber registered <6>[ 0.885797] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 0.894449] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 0.920411] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 0.929065] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 1.026255] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.036964] printk: console [ttyS2] disabled <6>[ 1.042016] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 47, base_baud = 1500000) is a 16550A <6>[ 1.052259] printk: console [ttyS2] enabled <6>[ 1.052259] printk: console [ttyS2] enabled <6>[ 1.062245] printk: bootconsole [uart0] disabled <6>[ 1.062245] printk: bootconsole [uart0] disabled <6>[ 1.077006] SuperH (H)SCI(F) driver initialized <6>[ 1.084139] msm_serial: driver initialized <6>[ 1.089066] STMicroelectronics ASC driver initialized <6>[ 1.096961] STM32 USART driver initialized <6>[ 1.128596] brd: module loaded <6>[ 1.139364] loop: module loaded <6>[ 1.161528] CAN device driver interface <6>[ 1.168215] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.176902] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.182749] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.189750] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.196096] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.210684] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.217285] usbcore: registered new interface driver pegasus <6>[ 1.223954] usbcore: registered new interface driver asix <6>[ 1.230361] usbcore: registered new interface driver ax88179_178a <6>[ 1.237551] usbcore: registered new interface driver cdc_ether <6>[ 1.244446] usbcore: registered new interface driver smsc75xx <6>[ 1.251216] usbcore: registered new interface driver smsc95xx <6>[ 1.258026] usbcore: registered new interface driver net1080 <6>[ 1.264721] usbcore: registered new interface driver cdc_subset <6>[ 1.271684] usbcore: registered new interface driver zaurus <6>[ 1.278318] usbcore: registered new interface driver cdc_ncm <4>[ 1.288430] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 1.296891] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 1.384871] dwc2 ff540000.usb: DWC OTG Controller <6>[ 1.390458] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 1.398699] dwc2 ff540000.usb: irq 51, io mem 0xff540000 <6>[ 1.405865] hub 1-0:1.0: USB hub found <6>[ 1.410401] hub 1-0:1.0: 1 port detected <4>[ 1.415886] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 1.424355] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 1.574291] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 1.597784] dwc2 ff580000.usb: DWC OTG Controller <6>[ 1.603375] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 1.611619] dwc2 ff580000.usb: irq 52, io mem 0xff580000 <6>[ 1.618685] hub 2-0:1.0: USB hub found <6>[ 1.623225] hub 2-0:1.0: 1 port detected <6>[ 1.633512] usbcore: registered new interface driver usb-storage <6>[ 1.644570] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 1.649549] i2c_dev: i2c /dev entries driver <6>[ 1.651221] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 1.666669] i2c 0-005a: Fixed dependency cycle(s) with /i2c@ff650000/act8846@5a/regulators/REG4 <6>[ 1.676859] i2c 0-005a: Fixed dependency cycle(s) with /i2c@ff650000/act8846@5a/regulators/REG2 <6>[ 1.691432] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 1.706587] ehci-platform ff500000.usb: irq 53, io mem 0xff500000 <6>[ 1.724885] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 1.734227] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 1.737557] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <6>[ 1.742248] hub 3-0:1.0: USB hub found <6>[ 1.754250] hub 3-0:1.0: 1 port detected <4>[ 1.772195] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 1.790600] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 1.806088] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.813296] sdhci: Copyright(c) Pierre Ossman <6>[ 1.821239] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.829644] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 1.830814] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.849958] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.849989] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 1.858713] usbcore: registered new interface driver usbhid <6>[ 1.864693] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 1.871209] usbhid: USB HID core driver <6>[ 1.877754] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 1.885801] NET: Registered PF_INET6 protocol family <6>[ 1.899689] Segment Routing with IPv6 <6>[ 1.904113] In-situ OAM (IOAM) with IPv6 <6>[ 1.908852] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.916073] NET: Registered PF_PACKET protocol family <6>[ 1.922002] can: controller area network core <6>[ 1.927218] NET: Registered PF_CAN protocol family <6>[ 1.932875] can: raw protocol <6>[ 1.936491] can: broadcast manager protocol <6>[ 1.941459] can: netlink gateway - max_hops=1 <5>[ 1.946870] Key type dns_resolver registered <6>[ 1.951991] ThumbEE CPU extension supported. <5>[ 1.957074] Registering SWP/SWPB emulation handler <5>[ 1.963096] Loading compiled-in X.509 certificates <6>[ 1.989858] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 1.997139] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 2.004732] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 2.012905] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 2.019555] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 2.026189] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 2.029282] Freeing initrd memory: 16776K <6>[ 2.033411] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 2.050279] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 2.056859] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 2.064965] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 2.073247] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 2.079382] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 2.088039] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 2.096692] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 2.102818] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 2.110988] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 2.118513] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 2.125423] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 2.132227] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 2.266338] hub 3-1:1.0: USB hub found <6>[ 2.271104] hub 3-1:1.0: 4 ports detected <6>[ 2.279764] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 2.291348] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 2.307257] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.308599] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.309784] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.310070] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 2.339710] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.347407] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.353935] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.365052] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 2.369479] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.372738] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 2.387448] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 62,32 bit host data width,256 deep fifo <6>[ 2.398607] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 2.406305] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 2.412835] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo <6>[ 2.419921] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 2.424448] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 2.434478] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.441120] mmc_host mmc1: card is non-removable. <6>[ 2.448805] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.460868] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.467420] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 2.475688] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.490666] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.498367] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.504898] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.519558] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.527785] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.535473] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.541989] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.554759] rk_gmac-dwmac ff290000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 2.565436] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 2.584195] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 2.592950] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 2.600009] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 2.612053] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 2.613278] mmc1: new high speed MMC card at address 0001 <6>[ 2.627891] mmcblk1: mmc1:0001 032GE4 29.1 GiB <6>[ 2.636939] mmcblk1: p1 p2 <6>[ 2.640743] mmcblk1boot0: mmc1:0001 032GE4 4.00 MiB <6>[ 2.647486] mmcblk1boot1: mmc1:0001 032GE4 4.00 MiB <6>[ 2.654118] mmcblk1rpmb: mmc1:0001 032GE4 4.00 MiB, chardev (236:0) <6>[ 2.664258] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.672500] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.680196] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.686727] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 5.715521] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 5.725488] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.774189] Sending DHCP requests .., OK <6>[ 7.989152] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.22 <6>[ 7.998583] IP-Config: Complete: <6>[ 8.002563] device=eth0, hwaddr=4a:01:9c:e5:04:ff, ipaddr=192.168.201.22, mask=255.255.255.0, gw=192.168.201.1 <6>[ 8.014744] host=rk3288-rock2-square-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 8.023797] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 8.023842] nameserver0=192.168.201.1 <4>[ 8.039803] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 8.049576] Freeing unused kernel image (initmem) memory: 2048K <6>[ 8.056760] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.105784] udevd[115]: starting version 3.2.9 <5>[ 8.112008] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 8.120044] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 8.128045] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 8.139776] udevd[115]: specified user 'tss' unknown <27>[ 8.145910] udevd[115]: specified group 'tss' unknown <30>[ 8.152808] udevd[116]: starting eudev-3.2.9 <6>[ 8.317747] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 8.326246] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 8.333937] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 8.340529] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 8.367347] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 8.383178] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 8.385747] usbcore: registered new device driver onboard-usb-hub <6>[ 8.391237] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 8.415688] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 8.423390] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 8.429965] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 8.430348] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 8.454201] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 8.458723] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <4>[ 8.472982] dwhdmi-rockchip ff980000.hdmi: supply avdd-0v9 not found, using dummy regulator <4>[ 8.482715] dwhdmi-rockchip ff980000.hdmi: supply avdd-1v8 not found, using dummy regulator <6>[ 8.492471] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 8.500953] rtc-hym8563 0-0051: registered as rtc0 <6>[ 8.503249] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 8.509442] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 8.510375] rtc-hym8563 0-0051: setting system clock to 2024-04-03T23:19:37 UTC (1712186377) <6>[ 8.516421] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 8.527679] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 8.537062] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 8.543604] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.554468] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 8.563949] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.572169] mmc_host mmc2: card is non-removable. <6>[ 8.578896] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.612279] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 8.636527] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 8.648267] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 8.677234] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 8.686197] panfrost ffa30000.gpu: features: 00000000,00000407, issues: 00000000,24040400 <6>[ 8.695641] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 8.709157] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 8.711515] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 8.719635] [drm] Initialized panfrost 1.2.0 20180908 for ffa30000.gpu on minor 1 <6>[ 8.744228] usb 3-1: reset high-speed USB device number 2 using ehci-platform <6>[ 8.763742] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 8.776601] mmc2: new high speed SDIO card at address 0001 <5>[ 8.875539] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 8.921504] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 8.930147] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 8.939639] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 8.949610] cfg80211: failed to load regulatory.db <6>[ 8.958303] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 8.968283] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.radxa,rock2-square.bin failed with error -2 <4>[ 8.981294] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 <6>[ 9.424328] onboard-usb-hub 3-1: reset high-speed USB device number 2 using ehci-platform <6>[ 9.636592] hub 3-1:1.0: USB hub found <6>[ 9.641596] hub 3-1:1.0: 4 ports detected <6>[ 9.654831] hub 3-1:1.0: USB hub found <6>[ 9.660067] hub 3-1:1.0: 4 ports detected done Saving random seed: <5>[ 9.685881] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 9.732513] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh <3>[ 9.994734] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 export SHELL=/bin/sh / # . /lava-13248491/environment . /lava-13248491/environment / # /lava-13248491/bin/lava-test-runner /lava-13248491/0 /lava-13248491/bin/lava-test-runner /lava-13248491/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-13248491/0/tests/0_dmesg<8>[ 10.357874] + cat uuid + UUID=13248491_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 10.390210] <8>[ 10.415439] <8>[ 10.440323] + <8>[ 10.450533] set +x / #