connecting to NetworkSerialPort(target=Target(name='tegra124-jetson-tk1', env=None), name='default', state=, avail=True, host='nuc-1', port=41191, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t nuc-1:41191 connected to 192.168.0.1 (port 41191) Escape character: Ctrl-\ Type the escape character to get to the prompt. U-Boot SPL 2015.10 (Dec 03 2015 - 13:25:02) U-Boot 2015.10 (Dec 03 2015 - 13:25:02 -0800) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 tegra-pcie: PCI regions: tegra-pcie: I/O: 0x12000000-0x12010000 tegra-pcie: non-prefetchable memory: 0x13000000-0x20000000 tegra-pcie: prefetchable memory: 0x20000000-0x40000000 tegra-pcie: 2x1, 1x1 configuration tegra-pcie: probing port 0, using 2 lanes tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, ignoring tegra-pcie: probing port 1, using 1 lanes In: serial Out: serial Err: serial Net: RTL8169#0 Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # setenv autoload no Tegra124 (Jetson TK1) # setenv initrd_high 0xffffffff Tegra124 (Jetson TK1) # setenv fdt_high 0xffffffff Tegra124 (Jetson TK1) # dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.0.214 (8 ms) Tegra124 (Jetson TK1) # setenv serverip 192.168.0.2 Tegra124 (Jetson TK1) # tftp 0x81000000 3895373/tftp-deploy-xe5luz4g/kernel/zImage Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.214 Filename '3895373/tftp-deploy-xe5luz4g/kernel/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 2.9 MiB/s done Bytes transferred = 10908160 (a67200 hex) Tegra124 (Jetson TK1) # tftp 0x82800000 3895373/tftp-deploy-xe5luz4g/ramdisk/ramdisk.cpio.gz.uboot Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.214 Filename '3895373/tftp-deploy-xe5luz4g/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x82800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.9 MiB/s done Bytes transferred = 17859494 (11083a6 hex) Tegra124 (Jetson TK1) # setenv initrd_size ${filesize} Tegra124 (Jetson TK1) # tftp 0x83f80000 3895373/tftp-deploy-xe5luz4g/dtb/tegra124-jetson-tk1.dtb Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.214 Filename '3895373/tftp-deploy-xe5luz4g/dtb/tegra124-jetson-tk1.dtb'. Load address: 0x83f80000 Loading: *###### 1.3 MiB/s done Bytes transferred = 73434 (11eda hex) Tegra124 (Jetson TK1) # setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' Tegra124 (Jetson TK1) # bootz 0x81000000 0x82800000 0x83f80000 Kernel image @ 0x81000000 [ 0x000000 - 0xa67200 ] ## Loading init Ramdisk from Legacy Image at 82800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17859430 Bytes = 17 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83f80000 Booting using the fdt blob at 0x83f80000 Using Device Tree in place at 83f80000, end 83f94ed9 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.11.0-rc5 (KernelCI@build-j302969-arm-gcc-12-multi-v7-defconfig-config-smp-n-jdkg8) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Sat Aug 31 05:16:59 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] earlycon: uart0 at MMIO 0x70006300 (options '115200n8') [ 0.000000] printk: legacy bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000b0000000-0x00000000ffefffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffefffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffefffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:129 arm_dt_init_cpu_maps+0xbc/0x120 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.11.0-rc5 #1 [ 0.000000] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 0.000000] Call trace: [ 0.000000] unwind_backtrace from show_stack+0x10/0x14 [ 0.000000] show_stack from dump_stack_lvl+0x50/0x58 [ 0.000000] dump_stack_lvl from __warn+0x78/0xfc [ 0.000000] __warn from warn_slowpath_fmt+0x98/0xc8 [ 0.000000] warn_slowpath_fmt from arm_dt_init_cpu_maps+0xbc/0x120 [ 0.000000] arm_dt_init_cpu_maps from setup_arch+0x44c/0x680 [ 0.000000] setup_arch from start_kernel+0x68/0x6a8 [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524032 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 <6>[ 0.000000] clocksource: tegra_suspend_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.000000] arch_timer: cp15 timer(s) running at 12.00MHz (virt). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns <6>[ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns <6>[ 0.008576] Switching to timer-based delay loop, resolution 83ns <6>[ 0.015644] Console: colour dummy device 80x30 <6>[ 0.020562] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) <6>[ 0.031588] CPU: Testing write buffer coherency: ok <6>[ 0.036954] CPU0: Spectre v2: using ICIALLU workaround <6>[ 0.042558] CPU0: Spectre BHB: enabling loop workaround for all CPUs <6>[ 0.049415] pid_max: default: 32768 minimum: 301 <6>[ 0.054589] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.062449] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.071890] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.082737] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 <6>[ 0.091881] EFI services will not be available. <6>[ 0.096873] Memory: 1965872K/2096128K available (15360K kernel code, 2540K rwdata, 6660K rodata, 2048K init, 413K bss, 62512K reserved, 65536K cma-reserved, 1244160K highmem) <6>[ 0.113596] devtmpfs: initialized <6>[ 0.130281] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 <6>[ 0.138674] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.149154] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.157638] pinctrl core: initialized pinctrl subsystem <6>[ 0.167160] DMI not present or invalid. <6>[ 0.172241] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.180101] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.190266] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.190290] cpuidle: using governor menu <6>[ 0.214274] platform 70000868.pinmux: Fixed dependency cycle(s) with /pinmux@70000868/pinmux <6>[ 0.246086] No ATAGs? <6>[ 0.248720] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.257302] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.276753] Serial: AMBA PL011 UART driver <3>[ 0.282379] tegra-mc 70019000.memory-controller: ppcsahbslvr: secure read @0x7fd41100: EMEM address decode error (EMEM decode error) <6>[ 0.331854] iommu: Default domain type: Translated <6>[ 0.337123] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.344917] SCSI subsystem initialized <6>[ 0.369729] usbcore: registered new interface driver usbfs <6>[ 0.375735] usbcore: registered new interface driver hub <6>[ 0.381576] usbcore: registered new device driver usb <6>[ 0.388584] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.394030] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.403814] PTP clock support registered <6>[ 0.408343] EDAC MC: Ver: 3.0.0 <6>[ 0.438313] scmi_core: SCMI protocol bus registered <6>[ 0.461078] vgaarb: loaded <6>[ 0.464375] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.508774] NET: Registered PF_INET protocol family <6>[ 0.514308] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.523708] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.532789] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.541132] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.549543] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.557382] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.564315] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.571415] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.579048] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.614710] RPC: Registered named UNIX socket transport module. <6>[ 0.621140] RPC: Registered udp transport module. <6>[ 0.626318] RPC: Registered tcp transport module. <6>[ 0.631479] RPC: Registered tcp-with-tls transport module. <6>[ 0.637461] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.644440] PCI: CLS 0 bytes, default 64 <5>[ 0.649668] Initialise system trusted keyrings <6>[ 0.664610] Trying to unpack rootfs image as initramfs... <6>[ 0.694451] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 0.701726] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.744502] NFS: Registering the id_resolver key type <5>[ 0.750060] Key type id_resolver registered <5>[ 0.754702] Key type id_legacy registered <6>[ 0.759165] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.766420] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.820192] Key type asymmetric registered <5>[ 0.824741] Asymmetric key parser 'x509' registered <6>[ 0.830148] bounce: pool size: 64 pages <6>[ 0.834458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.842424] io scheduler mq-deadline registered <6>[ 0.847428] io scheduler kyber registered <6>[ 0.851887] io scheduler bfq registered <4>[ 0.872522] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.963396] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver registered 32 channels <6>[ 0.975770] tegra-pmc 7000e400.pmc: emergency thermal reset enabled <6>[ 1.185947] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.244668] printk: legacy console [ttyS0] disabled <6>[ 1.250364] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 62, base_baud = 25500000) is a Tegra <6>[ 1.259911] printk: legacy console [ttyS0] enabled <6>[ 1.259911] printk: legacy console [ttyS0] enabled <6>[ 1.270176] printk: legacy bootconsole [uart0] disabled <6>[ 1.270176] printk: legacy bootconsole [uart0] disabled <6>[ 1.316030] msm_serial: driver initialized <6>[ 1.320778] SuperH (H)SCI(F) driver initialized <6>[ 1.325919] STMicroelectronics ASC driver initialized <6>[ 1.331341] STM32 USART driver initialized <6>[ 1.336703] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 63, base_baud = 0) is a TEGRA_UART <6>[ 1.374911] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART <6>[ 1.417447] tegra-host1x 50000000.host1x: Adding to iommu group 0 <6>[ 1.431965] tegra-vic 54340000.vic: Adding to iommu group 1 <6>[ 1.510012] brd: module loaded <6>[ 1.527288] loop: module loaded <3>[ 1.594580] spi spi1.0: Invalid delay unit 2, should be SPI_DELAY_UNIT_SCK <3>[ 1.601719] spi-tegra114 7000da00.spi: can't setup spi1.0, status -22 <3>[ 1.608429] spi_master spi1: spi_device register error /spi@7000da00/flash@0 <4>[ 1.615760] spi_master spi1: Failed to create SPI device for /spi@7000da00/flash@0 <6>[ 1.628442] CAN device driver interface <6>[ 1.633703] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.640868] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.646098] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.652299] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.657960] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.668629] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.674497] usbcore: registered new interface driver pegasus <6>[ 1.680435] usbcore: registered new interface driver asix <6>[ 1.686126] usbcore: registered new interface driver ax88179_178a <6>[ 1.692497] usbcore: registered new interface driver cdc_ether <6>[ 1.698620] usbcore: registered new interface driver smsc75xx <6>[ 1.704655] usbcore: registered new interface driver smsc95xx <6>[ 1.710677] usbcore: registered new interface driver net1080 <6>[ 1.716630] usbcore: registered new interface driver cdc_subset <6>[ 1.722836] usbcore: registered new interface driver zaurus <6>[ 1.728724] usbcore: registered new interface driver cdc_ncm <4>[ 1.735024] tegra-phy 7d000000.usb-phy: supply vbus not found, using dummy regulator <4>[ 1.743372] tegra-phy 7d004000.usb-phy: supply vbus not found, using dummy regulator <6>[ 1.755753] usbcore: registered new interface driver usb-storage <6>[ 1.900629] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 1.905811] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 1.965179] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.10 <6>[ 1.990183] hub 1-0:1.0: USB hub found <6>[ 2.004408] hub 1-0:1.0: 1 port detected <6>[ 2.038988] tegra_rtc 7000e000.rtc: registered as rtc1 <5>[ 2.044406] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock <6>[ 2.051416] i2c_dev: i2c /dev entries driver <4>[ 2.096746] at24 0-0056: supply vcc not found, using dummy regulator <6>[ 2.126252] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write <6>[ 2.206225] i2c 4-0040: Fixed dependency cycle(s) with /i2c@7000d000/pmic@40/pinmux <6>[ 2.236628] as3722 4-0040: AS3722 with revision 0x1 found <6>[ 2.295710] as3722-rtc as3722-rtc: registered as rtc0 <3>[ 2.304264] as3722-rtc as3722-rtc: hctosys: unable to read the hardware clock <6>[ 2.311674] as3722-rtc as3722-rtc: RTC interrupt 93 <6>[ 2.375997] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV <4>[ 2.393640] lm90 0-004c: supply vcc not found, using dummy regulator <6>[ 2.430768] hwmon hwmon0: temp1_input not attached to any thermal zone <6>[ 2.437751] hwmon hwmon0: temp2_input not attached to any thermal zone <6>[ 2.504275] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.510737] sdhci: Copyright(c) Pierre Ossman <6>[ 2.517383] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.525395] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.534696] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.542467] usbcore: registered new interface driver usbhid <6>[ 2.548308] usbhid: USB HID core driver <6>[ 2.556648] tegra-emc 7001b000.external-memory-controller: 64bit DRAM bus <6>[ 2.564956] tegra-emc 7001b000.external-memory-controller: OPP HW ver. 0x2, current clock rate 924 MHz <4>[ 2.575888] armv7-pmu pmu: hw perfevents: failed to find logical CPU for cpu <4>[ 2.583212] armv7-pmu pmu: hw perfevents: failed to find logical CPU for cpu <4>[ 2.590546] armv7-pmu pmu: hw perfevents: failed to find logical CPU for cpu <6>[ 2.598041] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available <6>[ 2.609103] NET: Registered PF_INET6 protocol family <6>[ 2.644933] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 2.649934] sdhci-tegra 700b0400.mmc: Got WP GPIO <4>[ 2.684757] mmc1: Invalid maximum block size, assuming 512 bytes <6>[ 2.694879] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV <6>[ 2.705654] Segment Routing with IPv6 <6>[ 2.709631] In-situ OAM (IOAM) with IPv6 <6>[ 2.713882] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.720598] NET: Registered PF_PACKET protocol family <6>[ 2.725922] can: controller area network core <6>[ 2.730570] NET: Registered PF_CAN protocol family <6>[ 2.735627] can: raw protocol <6>[ 2.738853] can: broadcast manager protocol <6>[ 2.743297] can: netlink gateway - max_hops=1 <5>[ 2.748225] Key type dns_resolver registered <6>[ 2.753539] ThumbEE CPU extension supported. <5>[ 2.758090] Registering SWP/SWPB emulation handler <6>[ 2.804302] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV <5>[ 2.834488] Loading compiled-in X.509 certificates <6>[ 2.866798] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV <6>[ 2.939967] tegra-dc 54200000.dc: Adding to iommu group 1 <4>[ 2.945726] Failed to attached device 54200000.dc to IOMMU_mapping <6>[ 2.953102] tegra-dc 54240000.dc: Adding to iommu group 1 <4>[ 2.958833] Failed to attached device 54240000.dc to IOMMU_mapping <6>[ 2.971506] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 696000 KHz, changing to: 714000 KHz <3>[ 3.004723] as3722 4-0040: Failed to create device link (0x180) with regulator-3v3run <6>[ 3.013674] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV <6>[ 3.020583] reg-fixed-voltage regulator-12v0sata: nonexclusive access to GPIO for (default) <3>[ 3.037579] +VDDIO_SDMMC3: bypassed regulator has no supply! <6>[ 3.065527] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV <6>[ 3.072911] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 3.077883] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 3.114775] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV <4>[ 3.138819] mmc0: Invalid maximum block size, assuming 512 bytes <6>[ 3.154512] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV <6>[ 3.183729] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV <4>[ 3.215302] usb2-0: supply vbus not found, using dummy regulator <4>[ 3.221689] usb2-1: supply vbus not found, using dummy regulator <6>[ 3.265270] tegra-pcie 1003000.pcie: host bridge /pcie@1003000 ranges: <6>[ 3.272059] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000 <6>[ 3.280405] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000 <6>[ 3.288745] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000 <6>[ 3.297082] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000 <6>[ 3.305466] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration <6>[ 3.355325] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes <6>[ 3.384425] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes <6>[ 3.502257] Freeing initrd memory: 17444K <6>[ 3.548471] mmc1: SDHCI controller on 700b0600.mmc [700b0600.mmc] using ADMA 64-bit <6>[ 3.557225] mmc0: SDHCI controller on 700b0400.mmc [700b0400.mmc] using ADMA 64-bit <6>[ 3.623123] mmc1: new high speed MMC card at address 0001 <6>[ 3.629590] mmcblk1: mmc1:0001 SEM16G 14.7 GiB <6>[ 3.636636] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 <6>[ 3.641973] mmcblk1boot0: mmc1:0001 SEM16G 4.00 MiB <6>[ 3.647651] mmcblk1boot1: mmc1:0001 SEM16G 4.00 MiB <6>[ 3.653283] mmcblk1rpmb: mmc1:0001 SEM16G 4.00 MiB, chardev (236:0) <6>[ 4.029933] mmc0: new high speed SD card at address 0260 <6>[ 4.036270] mmcblk0: mmc0:0260 1232 961 MiB <6>[ 4.043641] mmcblk0: p1 p2 <6>[ 4.672581] tegra-pcie 1003000.pcie: link 0 down, ignoring <6>[ 4.683592] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 <6>[ 4.690247] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 4.696097] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01001fff] <6>[ 4.703281] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] <6>[ 4.709794] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] <6>[ 4.716999] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] <6>[ 4.725914] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 PCIe Root Port <4>[ 4.733540] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits <6>[ 4.743573] pci 0000:00:02.0: PCI bridge to [bus 00] <6>[ 4.748876] pci 0000:00:02.0: bridge window [io 0x0000-0x0fff] <6>[ 4.755335] pci 0000:00:02.0: enabling Extended Tags <6>[ 4.760738] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.783171] PCI: bus0: Fast back to back transfers disabled <6>[ 4.789092] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring <6>[ 4.797849] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint <6>[ 4.805479] pci 0000:01:00.0: BAR 0 [io 0x0000-0x00ff] <6>[ 4.811047] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00000fff 64bit] <6>[ 4.817847] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] <6>[ 4.825329] pci 0000:01:00.0: supports D1 D2 <6>[ 4.829894] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.864522] PCI: bus1: Fast back to back transfers disabled <6>[ 4.870408] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 <6>[ 4.877443] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]: assigned <6>[ 4.885281] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]: assigned <6>[ 4.894022] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]: assigned <6>[ 4.901156] pci 0000:01:00.0: BAR 4 [mem 0x20000000-0x20003fff 64bit pref]: assigned <6>[ 4.909261] pci 0000:01:00.0: BAR 2 [mem 0x13000000-0x13000fff 64bit]: assigned <6>[ 4.916942] pci 0000:01:00.0: BAR 0 [io 0x1000-0x10ff]: assigned <6>[ 4.923350] pci 0000:00:02.0: PCI bridge to [bus 01] <6>[ 4.928645] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] <6>[ 4.935074] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] <6>[ 4.942164] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] <6>[ 4.950239] pci_bus 0000:00: resource 4 [mem 0x01000000-0x01001fff] <6>[ 4.956837] pci_bus 0000:00: resource 5 [io 0x0000-0xffff] <6>[ 4.962707] pci_bus 0000:00: resource 6 [mem 0x13000000-0x1fffffff] <6>[ 4.969295] pci_bus 0000:00: resource 7 [mem 0x20000000-0x3fffffff pref] <6>[ 4.976322] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] <6>[ 4.982190] pci_bus 0000:01: resource 1 [mem 0x13000000-0x130fffff] <6>[ 4.988776] pci_bus 0000:01: resource 2 [mem 0x20000000-0x200fffff 64bit pref] <4>[ 4.996378] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge <6>[ 5.003899] pcieport 0000:00:02.0: enabling device (0140 -> 0143) <6>[ 5.010711] pcieport 0000:00:02.0: PME: Signaling with IRQ 116 <6>[ 5.017878] r8169 0000:01:00.0: enabling device (0140 -> 0143) <6>[ 5.077192] r8169 0000:01:00.0 eth0: RTL8168g/8111g, 00:04:4b:21:2a:66, XID 4c0, IRQ 119 <6>[ 5.085574] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <4>[ 5.096530] tegra-ahci 70027000.sata: supply ahci not found, using dummy regulator <4>[ 5.104504] tegra-ahci 70027000.sata: supply phy not found, using dummy regulator <4>[ 5.112362] tegra-ahci 70027000.sata: supply target not found, using dummy regulator <6>[ 5.121258] tegra-ahci 70027000.sata: AHCI vers 0001.0301, 32 command slots, 3 Gbps, platform mode <6>[ 5.130466] tegra-ahci 70027000.sata: 1/2 ports implemented (port mask 0x1) <6>[ 5.137676] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pmp pio slum part sadm sds apst <6>[ 5.147341] scsi host0: tegra-ahci <6>[ 5.151149] scsi host1: tegra-ahci <6>[ 5.154875] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 120 lpm-pol 0 <6>[ 5.163986] ata2: DUMMY <6>[ 5.189138] ci_hdrc ci_hdrc.2: EHCI Host Controller <6>[ 5.194276] ci_hdrc ci_hdrc.2: new USB bus registered, assigned bus number 2 <6>[ 5.224386] ci_hdrc ci_hdrc.2: USB 2.0 started, EHCI 1.10 <6>[ 5.230426] hub 2-0:1.0: USB hub found <6>[ 5.234457] hub 2-0:1.0: 1 port detected <6>[ 5.242008] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 <6>[ 5.496131] ata1: SATA link down (SStatus 0 SControl 300) <4>[ 5.505409] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2 <3>[ 5.514820] r8169 0000:01:00.0: Unable to load firmware rtl_nic/rtl8168g-2.fw (-2) <6>[ 5.554380] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) <6>[ 5.724771] r8169 0000:01:00.0 eth0: Link is Down <6>[ 7.292973] r8169 0000:01:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx <5>[ 7.344457] Sending DHCP requests ., OK <6>[ 7.388561] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.214 <6>[ 7.396650] IP-Config: Complete: <6>[ 7.400162] device=eth0, hwaddr=00:04:4b:21:2a:66, ipaddr=192.168.0.214, mask=255.255.255.0, gw=192.168.0.254 <6>[ 7.410858] host=192.168.0.214, domain=shed, nis-domain=(none) <6>[ 7.417443] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= <6>[ 7.417478] nameserver0=192.168.0.1, nameserver1=192.168.1.254 <6>[ 7.431724] clk: Disabling unused clocks <6>[ 7.436556] PM: genpd: Disabling unused power domains <6>[ 7.443851] Freeing unused kernel image (initmem) memory: 2048K <6>[ 7.450123] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.500154] udevd[100]: starting version 3.2.9 <5>[ 15.184381] random: crng init done <27>[ 15.190538] udevd[100]: specified user 'tss' unknown <27>[ 15.195967] udevd[100]: specified group 'tss' unknown <30>[ 15.202410] udevd[101]: starting eudev-3.2.9 <6>[ 16.019953] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) <6>[ 16.060244] r8169 0000:01:00.0 enp1s0: renamed from eth0 (while UP) <6>[ 16.213684] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when cpu reaches 101000 mC <6>[ 16.223422] tegra_soctherm 700e2000.thermal-sensor: throttrip: will throttle when cpu reaches 101000 mC <6>[ 16.233265] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when gpu reaches 101000 mC <6>[ 16.242988] tegra_soctherm 700e2000.thermal-sensor: throttrip: will throttle when gpu reaches 101000 mC <6>[ 16.252821] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when pll reaches 103000 mC <6>[ 16.262732] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when mem reaches 101000 mC <4>[ 16.281607] tegra-xusb 70090000.usb: Direct firmware load for nvidia/tegra124/xusb.bin failed with error -2 <3>[ 16.291611] tegra-xusb 70090000.usb: failed to request firmware: -2 <3>[ 16.298127] tegra-xusb 70090000.usb: failed to request firmware: -2 <3>[ 16.304666] tegra-xusb 70090000.usb: probe with driver tegra-xusb failed with error -2 <6>[ 16.360592] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 <4>[ 17.142078] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub done Saving random seed: OK Starting network: <6>[ 17.170551] input: NVIDIA Tegra Jetson TK1 Headphones Jack as /devices/soc0/sound/sound/card1/input2 ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # / # export SHELL=/bin/sh / # . /lava-3895373/environment / # /lava-3895373/bin/lava-test-runner /lava-3895373/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-3895373/0/tests/0<8>[ 17.766274] _dmesg + cat uuid + UUID=3895373_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 17.788374] <8>[ 17.807877] <8>[ 17.827419] + set +x <8>[ 17.836407] / #