Trying 192.168.56.175... Connected to arpeggi. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-1c1c000.usb-usb-0:1:1.3-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot SPL 2022.04-6.3.0+git.c71ae7141f30 (May 15 2023 - 16:20:01 +0000) DDRINFO: start DRAM init DDRINFO: DRAM rate 4000MTS Training FAILED DDRINFO: start DRAM init DDRINFO: DRAM rate 4000MTS DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done DDR configured as single rank SEC0: RNG instantiated Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Boot Stage: Primary boot Find img info 0x&4802d800, size 888 Download 916480, Total size 917440 NOTICE: BL31: v2.6(release):lf_v2.6-g3c1583ba0a NOTICE: BL31: Built : 11:00:38, Nov 21 2022 U-Boot 2022.04-6.3.0+git.c71ae7141f30 (May 15 2023 - 16:20:01 +0000) CPU: i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz) CPU: Industrial temperature grade (-40C to 105C) at 43C Reset cause: POR DRAM: 4 GiB Core: 89 devices, 23 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@30880000 Out: serial@30880000 Err: serial@30880000 Model: Toradex 0063 Verdin iMX8M Plus Quad 4GB IT V1.1A Serial#: 15034401 Carrier: Toradex Dahlia V1.1C, Serial# 11080179 SEC0: RNG instantiated BuildInfo: - ATF 3c1583b Net: eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Normal Boot Hit any key to stop autoboot: 1  0 Verdin iMX8MP # setenv autoload no setenv autoload no Verdin iMX8MP # dhcp dhcp ethernet@30bf0000 Waiting for PHY auto negotiation to complete...... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.240 (3817 ms) Verdin iMX8MP #setenv serverip 192.168.56.193 setenv serverip 192.168.56.193 Verdin iMX8MP # tftp 0x40400000 681722/tftp-deploy-bym6p30z/kernel/Image tftp 0x40400000 681722/tftp-deploy-bym6p30z/kernel/Image Using ethernet@30bf0000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.240 Filename '681722/tftp-deploy-bym6p30z/kernel/Image'. Load address: 0x40400000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### 29.5 MiB/s done Bytes transferred = 39019008 (2536200 hex) Verdin iMX8MP # tftp 0x45000000 681722/tftp-deploy-bym6p30z/ramdisk/ramdisk.cpio.gz.uboot tftp 0x45000000 681722/tftp-deploy-bym6p30z/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@30bf0000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.240 Filename '681722/tftp-deploy-bym6p30z/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x45000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 32.6 MiB/s done Bytes transferred = 26542259 (19500b3 hex) Verdin iMX8MP # setenv initrd_size ${filesize} setenv initrd_size ${filesize} Verdin iMX8MP # tftp 0x44000000 681722/tftp-deploy-bym6p30z/dtb/imx8mp-verdin-nonwifi-dahlia.dtb tftp 0x44000000 681722/tftp-deploy-bym6p30z/dtb/imx8mp-verdin-nonwifi-dahlia.dtb Using ethernet@30bf0000 device TFTP from server 192.168.56.193; our IP address is 192.168.56.240 Filename '681722/tftp-deploy-bym6p30z/dtb/imx8mp-verdin-nonwifi-dahlia.dtb'. Load address: 0x44000000 Loading: *## 20.1 MiB/s done Bytes transferred = 63139 (f6a3 hex) Verdin iMX8MP # setenv bootargs 'console=ttymxc2,115200 earlycon,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc2,115200 earlycon,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' Verdin iMX8MP # booti 0x40400000 0x45000000 0x44000000 booti 0x40400000 0x45000000 0x44000000 ## Loading init Ramdisk from Legacy Image at 45000000 ... Image Name: Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 26542195 Bytes = 25.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Loading Device Tree to 00000000ffaf1000, end 00000000ffb036a2 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.11.0-rc5 (KernelCI@build-j303008-arm64-clang-15-defconfig-config-arm64-64k-pas2nl6) (Debian clang version 15.0.7, Debian LLD 15.0.7) #1 SMP PREEMPT Sat Aug 31 05:13:29 UTC 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Toradex Verdin iMX8M Plus on Dahlia Board [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030880000 (options '') [ 0.000000] printk: legacy bootconsole [ec_imx6q0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x13ff12f40-0x13ff1597f] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] cma: Reserved 512 MiB at 0x00000000c0000000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 2 pages/cpu s60248 r8192 d62632 u131072 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttymxc2,115200 earlycon,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <5>[ 0.000000] Unknown kernel command line parameters "earlycon,115200n8", will be passed to user space. <6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes, linear) <6>[ 0.000000] Fallback order for Node 0: 0 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536 <6>[ 0.000000] Policy zone: Normal <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] software IO TLB: area num 4. <6>[ 0.000000] software IO TLB: mapped [mem 0x00000000fbaf0000-0x00000000ffaf0000] (64MB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. <6>[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode <6>[ 0.000000] GICv3: 160 SPIs implemented <6>[ 0.000000] GICv3: 0 Extended SPIs implemented <6>[ 0.000000] Root IRQ handler: gic_handle_irq <6>[ 0.000000] GICv3: GICv3 features: 16 PPIs <6>[ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1 <6>[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000 <4>[ 0.000000] ITS: No ITS available, not enabling LPIs <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <6>[ 0.000000] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <6>[ 0.010303] Console: colour dummy device 80x25 <6>[ 0.013128] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) <6>[ 0.023637] pid_max: default: 32768 minimum: 301 <6>[ 0.028597] LSM: initializing lsm=capability <6>[ 0.033171] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear) <6>[ 0.040787] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear) <6>[ 0.050909] rcu: Hierarchical SRCU implementation. <6>[ 0.054019] rcu: Max phase no-delay instances is 1000. <6>[ 0.059712] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.071371] EFI services will not be available. <6>[ 0.073613] smp: Bringing up secondary CPUs ... <6>[ 0.078600] Detected VIPT I-cache on CPU1 <6>[ 0.078657] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000 <6>[ 0.078690] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] <6>[ 0.079295] Detected VIPT I-cache on CPU2 <6>[ 0.079338] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000 <6>[ 0.079358] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] <6>[ 0.079930] Detected VIPT I-cache on CPU3 <6>[ 0.079974] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000 <6>[ 0.079994] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] <6>[ 0.080171] smp: Brought up 1 node, 4 CPUs <6>[ 0.137382] SMP: Total of 4 processors activated. <6>[ 0.142363] CPU: All CPU(s) started at EL2 <6>[ 0.146773] CPU features: detected: 32-bit EL0 Support <6>[ 0.152162] CPU features: detected: 32-bit EL1 Support <6>[ 0.157595] CPU features: detected: CRC32 instructions <6>[ 0.163041] alternatives: applying system-wide alternatives <6>[ 0.170133] Memory: 3514880K/4194304K available (17536K kernel code, 5272K rwdata, 11840K rodata, 2880K init, 1171K bss, 144000K reserved, 524288K cma-reserved) <6>[ 0.184062] devtmpfs: initialized <6>[ 0.197391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.204625] futex hash table entries: 1024 (order: 0, 65536 bytes, linear) <6>[ 0.212570] 1427 pages in range for non-PLT usage <6>[ 0.212585] 32147 pages in range for PLT usage <6>[ 0.217248] pinctrl core: initialized pinctrl subsystem <6>[ 0.230542] DMI not present or invalid. <6>[ 0.233488] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.242054] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.246720] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.254707] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.262893] audit: initializing netlink subsys (disabled) <5>[ 0.268786] audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1 <6>[ 0.270550] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.276585] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.282930] cpuidle: using governor menu <6>[ 0.294143] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.301065] ASID allocator initialised with 65536 entries <6>[ 0.309557] Serial: AMBA PL011 UART driver <6>[ 0.320555] platform soc@0: Fixed dependency cycle(s) with /soc@0/bus@30000000/efuse@30350000/unique-id@8 <6>[ 0.328705] platform funnel: Fixed dependency cycle(s) with /soc@0/etm@28440000 <6>[ 0.335322] amba 28440000.etm: Fixed dependency cycle(s) with /funnel <6>[ 0.342088] platform funnel: Fixed dependency cycle(s) with /soc@0/etm@28540000 <6>[ 0.349661] amba 28540000.etm: Fixed dependency cycle(s) with /funnel <6>[ 0.356442] platform funnel: Fixed dependency cycle(s) with /soc@0/etm@28640000 <6>[ 0.364003] amba 28640000.etm: Fixed dependency cycle(s) with /funnel <6>[ 0.370790] platform funnel: Fixed dependency cycle(s) with /soc@0/etm@28740000 <6>[ 0.378373] amba 28740000.etm: Fixed dependency cycle(s) with /funnel <6>[ 0.385157] platform funnel: Fixed dependency cycle(s) with /soc@0/funnel@28c03000 <6>[ 0.392947] amba 28c03000.funnel: Fixed dependency cycle(s) with /soc@0/etf@28c04000 <6>[ 0.400962] amba 28c03000.funnel: Fixed dependency cycle(s) with /funnel <6>[ 0.408086] amba 28c03000.funnel: Fixed dependency cycle(s) with /soc@0/etf@28c04000 <6>[ 0.416038] amba 28c04000.etf: Fixed dependency cycle(s) with /soc@0/etr@28c06000 <6>[ 0.423804] amba 28c04000.etf: Fixed dependency cycle(s) with /soc@0/funnel@28c03000 <6>[ 0.431967] amba 28c04000.etf: Fixed dependency cycle(s) with /soc@0/etr@28c06000 <6>[ 0.439694] amba 28c06000.etr: Fixed dependency cycle(s) with /soc@0/etf@28c04000 <6>[ 0.451376] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpiohog3grp <6>[ 0.459602] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpiohog2grp <6>[ 0.470618] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpiohog1grp <6>[ 0.481644] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio8grp <6>[ 0.492406] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio7grp <6>[ 0.503169] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio4grp <6>[ 0.513929] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio3grp <6>[ 0.524694] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio2grp <6>[ 0.535454] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/gpio1grp <6>[ 0.546894] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver <6>[ 0.554517] platform 30350000.efuse: Fixed dependency cycle(s) with /soc@0/bus@30000000/clock-controller@30380000 <6>[ 0.566132] platform 30350000.efuse: Fixed dependency cycle(s) with /soc@0/bus@30000000/clock-controller@30380000 <6>[ 0.575593] platform 30380000.clock-controller: Fixed dependency cycle(s) with /soc@0/interrupt-controller@38800000 <6>[ 0.604640] platform 32fc4000.display-bridge: Fixed dependency cycle(s) with /soc@0/bus@32c00000/hdmi@32fd8000 <6>[ 0.612184] platform 32fc4000.display-bridge: Fixed dependency cycle(s) with /soc@0/bus@32c00000/display-controller@32fc6000 <6>[ 0.624159] platform 32fc4000.display-bridge: Fixed dependency cycle(s) with /soc@0/bus@32c00000/display-controller@32fc6000 <6>[ 0.635341] platform 32fc6000.display-controller: Fixed dependency cycle(s) with /soc@0/bus@32c00000/display-bridge@32fc4000 <6>[ 0.647353] platform 32fc4000.display-bridge: Fixed dependency cycle(s) with /soc@0/bus@32c00000/hdmi@32fd8000 <6>[ 0.657257] platform 32fd8000.hdmi: Fixed dependency cycle(s) with /soc@0/bus@32c00000/display-bridge@32fc4000 <6>[ 0.673952] platform connector: Fixed dependency cycle(s) with /soc@0/usb@32f10100/usb@38100000 <6>[ 0.683591] platform 32fd8000.hdmi: Fixed dependency cycle(s) with /native-hdmi-connector <6>[ 0.689406] platform native-hdmi-connector: Fixed dependency cycle(s) with /soc@0/bus@32c00000/hdmi@32fd8000 <6>[ 0.701518] HugeTLB: registered 16.0 GiB page size, pre-allocated 0 pages <6>[ 0.706490] HugeTLB: 0 KiB vmemmap can be freed for a 16.0 GiB page <6>[ 0.713031] HugeTLB: registered 512 MiB page size, pre-allocated 0 pages <6>[ 0.720028] HugeTLB: 0 KiB vmemmap can be freed for a 512 MiB page <6>[ 0.726507] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.733588] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.742488] ACPI: Interpreter disabled. <6>[ 0.748247] iommu: Default domain type: Translated <6>[ 0.750485] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.757306] SCSI subsystem initialized <6>[ 0.761330] usbcore: registered new interface driver usbfs <6>[ 0.766774] usbcore: registered new interface driver hub <6>[ 0.772372] usbcore: registered new device driver usb <6>[ 0.779378] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.782936] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.792395] PTP clock support registered <6>[ 0.796802] EDAC MC: Ver: 3.0.0 <6>[ 0.800452] scmi_core: SCMI protocol bus registered <6>[ 0.806449] FPGA manager framework <6>[ 0.808913] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.816179] vgaarb: loaded <6>[ 0.818641] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.824997] VFS: Disk quotas dquot_6.6.0 <6>[ 0.828818] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) <6>[ 0.836367] pnp: PnP ACPI: disabled <6>[ 0.846529] NET: Registered PF_INET protocol family <6>[ 0.849001] IP idents hash table entries: 65536 (order: 3, 524288 bytes, linear) <6>[ 0.859032] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes, linear) <6>[ 0.865467] Table-perturb hash table entries: 65536 (order: 2, 262144 bytes, linear) <6>[ 0.873434] TCP established hash table entries: 32768 (order: 2, 262144 bytes, linear) <6>[ 0.881872] TCP bind hash table entries: 32768 (order: 4, 1048576 bytes, linear) <6>[ 0.890210] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 0.896293] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear) <6>[ 0.903262] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear) <6>[ 0.910805] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.916939] RPC: Registered named UNIX socket transport module. <6>[ 0.922783] RPC: Registered udp transport module. <6>[ 0.927765] RPC: Registered tcp transport module. <6>[ 0.932752] RPC: Registered tcp-with-tls transport module. <6>[ 0.938523] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.945270] PCI: CLS 0 bytes, default 64 <6>[ 0.949780] Unpacking initramfs... <6>[ 0.956734] kvm [1]: nv: 529 coarse grained trap handlers <6>[ 0.959996] kvm [1]: IPA Size Limit: 40 bits <6>[ 0.964422] kvm [1]: GICv3: no GICV resource entry <6>[ 0.969203] kvm [1]: disabling GICv2 emulation <6>[ 0.973939] kvm [1]: GIC system register CPU interface enabled <6>[ 0.980072] kvm [1]: vgic interrupt IRQ9 <6>[ 0.984274] kvm [1]: Hyp nVHE mode initialized successfully <5>[ 0.991430] Initialise system trusted keyrings <6>[ 0.995038] workingset: timestamp_bits=42 max_order=16 bucket_order=0 <6>[ 1.001951] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.008033] NFS: Registering the id_resolver key type <5>[ 1.013087] Key type id_resolver registered <5>[ 1.017508] Key type id_legacy registered <6>[ 1.021834] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.028789] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 1.036673] 9p: Installing v9fs 9p2000 file system support <5>[ 1.078667] Key type asymmetric registered <5>[ 1.080201] Asymmetric key parser 'x509' registered <6>[ 1.085461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 1.093073] io scheduler mq-deadline registered <6>[ 1.097882] io scheduler kyber registered <6>[ 1.102215] io scheduler bfq registered <6>[ 1.161708] SoC: i.MX8MP revision 1.1 <6>[ 1.211218] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.220307] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 15, base_baud = 1500000) is a IMX <6>[ 1.227460] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 16, base_baud = 1500000) is a IMX <6>[ 1.235717] printk: legacy console [ttymxc2] enabled <6>[ 1.235717] printk: legacy console [ttymxc2] enabled <6>[ 1.246113] printk: legacy bootconsole [ec_imx6q0] disabled <6>[ 1.246113] printk: legacy bootconsole [ec_imx6q0] disabled <6>[ 1.259684] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 17, base_baud = 1500000) is a IMX <6>[ 1.270947] msm_serial: driver initialized <6>[ 1.276159] SuperH (H)SCI(F) driver initialized <6>[ 1.281526] STM32 USART driver initialized <6>[ 1.299279] loop: module loaded <6>[ 1.304397] megasas: 07.727.03.00-rc1 <6>[ 1.320053] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.327354] thunder_xcv, ver 1.0 <6>[ 1.330913] thunder_bgx, ver 1.0 <6>[ 1.334435] nicpf, ver 1.0 <6>[ 1.339983] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 1.347492] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 1.353140] hclge is initializing <6>[ 1.356776] e1000: Intel(R) PRO/1000 Network Driver <6>[ 1.361931] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 1.368002] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.373240] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.379472] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.385145] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.391035] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 1.397577] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 1.404598] sky2: driver version 1.30 <6>[ 1.411089] VFIO - User Level meta-driver version: 0.3 <6>[ 1.422292] usbcore: registered new interface driver usb-storage <6>[ 1.434581] i2c_dev: i2c /dev entries driver <6>[ 1.454284] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.460763] sdhci: Copyright(c) Pierre Ossman <6>[ 1.467300] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.475847] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.486795] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.494363] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... <6>[ 1.502883] usbcore: registered new interface driver usbhid <6>[ 1.508748] usbhid: USB HID core driver <6>[ 1.521184] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available <6>[ 1.532690] platform soc@0: Fixed dependency cycle(s) with /soc@0/bus@30000000/efuse@30350000 <6>[ 1.550888] NET: Registered PF_PACKET protocol family <6>[ 1.556306] 9pnet: Installing 9P2000 support <5>[ 1.560931] Key type dns_resolver registered <6>[ 1.575795] registered taskstats version 1 <5>[ 1.580433] Loading compiled-in X.509 certificates <6>[ 1.594317] Demotion targets for Node 0: null <4>[ 1.612048] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 1.622985] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 1.633877] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 1.644812] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 1.655786] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 1.678878] reg-fixed-voltage regulator-pcie: nonexclusive access to GPIO for (default) <6>[ 1.679410] i2c i2c-0: using pinctrl states for GPIO recovery <6>[ 1.693291] i2c i2c-0: using generic GPIOs for recovery <6>[ 1.699762] i2c i2c-0: IMX I2C adapter registered <6>[ 1.705996] i2c i2c-1: using pinctrl states for GPIO recovery <6>[ 1.710419] nxp-pca9450 0-0025: pca9450bc probed. <6>[ 1.712088] i2c i2c-1: using generic GPIOs for recovery <6>[ 1.722619] i2c i2c-1: IMX I2C adapter registered <6>[ 1.728773] i2c i2c-2: using pinctrl states for GPIO recovery <6>[ 1.734903] i2c i2c-2: using generic GPIOs for recovery <6>[ 1.740522] i2c i2c-2: IMX I2C adapter registered <6>[ 1.746692] i2c i2c-3: using pinctrl states for GPIO recovery <6>[ 1.752828] i2c i2c-3: using generic GPIOs for recovery <6>[ 1.759389] i2c i2c-3: IMX I2C adapter registered <6>[ 1.765811] i2c i2c-4: using pinctrl states for GPIO recovery <6>[ 1.771971] i2c i2c-4: using generic GPIOs for recovery <6>[ 1.777596] i2c i2c-4: IMX I2C adapter registered <6>[ 1.813641] platform connector: Fixed dependency cycle(s) with /soc@0/usb@32f10100/usb@38100000 <6>[ 1.822795] platform 38100000.usb: Fixed dependency cycle(s) with /connector <6>[ 1.842434] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO <4>[ 1.842778] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator <6>[ 1.861859] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges: <6>[ 1.869160] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 1.869491] imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000 <6>[ 1.875185] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 <6>[ 1.883633] imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000 <6>[ 1.891939] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000808000000010 <6>[ 1.909700] xhci-hcd xhci-hcd.0.auto: irq 203, io mem 0x38200000 <6>[ 1.916147] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 1.921926] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 <6>[ 1.929868] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed <6>[ 1.937270] hub 1-0:1.0: USB hub found <6>[ 1.941337] hub 1-0:1.0: 1 port detected <6>[ 1.948226] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 1.957142] hub 2-0:1.0: USB hub found <6>[ 1.961214] hub 2-0:1.0: 1 port detected <6>[ 1.969095] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 2.114908] imx6q-pcie 33800000.pcie: iATU: unroll T, 4 ob, 4 ib, align 64K, limit 16G <6>[ 2.202693] usb 1-1: new high-speed USB device number 2 using xhci-hcd <6>[ 2.235157] Freeing initrd memory: 25856K <6>[ 2.271245] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA <6>[ 2.274086] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA <6>[ 2.329658] mmc2: new HS400 Enhanced strobe MMC card at address 0001 <6>[ 2.336824] mmcblk2: mmc2:0001 IX2932 29.1 GiB <6>[ 2.343262] mmcblk2: p1 p2 <6>[ 2.346817] mmcblk2boot0: mmc2:0001 IX2932 4.00 MiB <6>[ 2.352845] mmcblk2boot1: mmc2:0001 IX2932 4.00 MiB <6>[ 2.358922] mmcblk2rpmb: mmc2:0001 IX2932 4.00 MiB, chardev (234:0) <6>[ 2.416865] hub 1-1:1.0: USB hub found <6>[ 2.420948] hub 1-1:1.0: 4 ports detected <6>[ 2.490673] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd <6>[ 2.544851] hub 2-1:1.0: USB hub found <6>[ 2.548910] hub 2-1:1.0: 3 ports detected <6>[ 2.766653] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd <6>[ 3.122652] imx6q-pcie 33800000.pcie: Phy link never came up <6>[ 4.126650] imx6q-pcie 33800000.pcie: Phy link never came up <6>[ 4.132886] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00 <6>[ 4.139525] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 4.145288] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] <6>[ 4.151752] pci_bus 0000:00: root bus resource [mem 0x18000000-0x1fefffff] <6>[ 4.158939] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 PCIe Root Port <6>[ 4.166532] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x000fffff] <6>[ 4.172733] pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref] <6>[ 4.179188] pci 0000:00:00.0: PCI bridge to [bus 01-ff] <6>[ 4.184688] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] <6>[ 4.191057] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] <6>[ 4.198122] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref] <6>[ 4.205663] pci 0000:00:00.0: supports D1 <6>[ 4.209945] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold <6>[ 4.219388] pci 0000:00:00.0: BAR 0 [mem 0x18000000-0x180fffff]: assigned <6>[ 4.226457] pci 0000:00:00.0: ROM [mem 0x18100000-0x1810ffff pref]: assigned <6>[ 4.233785] pci 0000:00:00.0: PCI bridge to [bus 01-ff] <6>[ 4.239292] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] <6>[ 4.245136] pci_bus 0000:00: resource 5 [mem 0x18000000-0x1fefffff] <6>[ 4.252029] pcieport 0000:00:00.0: PME: Signaling with IRQ 206 <6>[ 4.258402] pcieport 0000:00:00.0: AER: enabled with IRQ 206 <6>[ 16.534697] clk: Disabling unused clocks <6>[ 16.543667] PM: genpd: Disabling unused power domains <6>[ 16.549074] ALSA device list: <6>[ 16.552313] No soundcards found. <6>[ 16.556483] Freeing unused kernel memory: 2880K <6>[ 16.561324] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 16.619855] udevd[119]: starting version 3.2.9 <5>[ 22.346654] random: crng init done <27>[ 22.354935] udevd[119]: specified user 'tss' unknown <27>[ 22.360372] udevd[119]: specified group 'tss' unknown <30>[ 22.367137] udevd[120]: starting eudev-3.2.9 <6>[ 22.571281] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 7 mkt segment 2 supported-hw 0x80 0x4 <6>[ 22.588418] cs_system_cfg: CoreSight Configuration manager initialised <6>[ 22.677679] caam 30900000.crypto: device ID = 0x0a16040100000100 (Era 9) <6>[ 22.692391] caam 30900000.crypto: job rings = 2, qi = 0 <6>[ 22.713422] CAN device driver interface <6>[ 22.733493] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/30000000.bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input1 <6>[ 22.771995] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc1 <4>[ 22.790585] rtc-ds1307 0-0032: oscillator failed, set time! <6>[ 22.807567] rtc-ds1307 0-0032: registered as rtc0 <3>[ 22.827111] rtc-ds1307 0-0032: hctosys: unable to read the hardware clock <6>[ 22.837078] hwmon hwmon3: temp1_input not attached to any thermal zone <6>[ 22.839063] wm8904 3-001a: revision A <6>[ 22.844583] lm75 3-004f: hwmon3: sensor 'tmp75c' <6>[ 22.847021] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware <6>[ 22.850872] imx-sdma 30e00000.dma-controller: external firmware not found, using ROM firmware <4>[ 22.857036] ina2xx 3-0040: supply vs not found, using dummy regulator <6>[ 22.857471] imx-sdma 30e10000.dma-controller: external firmware not found, using ROM firmware <6>[ 22.862753] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found <6>[ 22.872531] ina2xx 3-0040: power monitor ina219 (Rshunt = 10000 uOhm) <6>[ 22.877281] imx-dwmac 30bf0000.ethernet: IRQ sfty not found <6>[ 22.922878] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51 <6>[ 22.923573] imx8mp-dw-hdmi-tx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (SAMSUNG HDMI TX PHY) <6>[ 22.943753] imx-dwmac 30bf0000.ethernet: DWMAC4/5 <6>[ 22.948899] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported <6>[ 22.956360] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported <6>[ 22.963849] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported <6>[ 22.973379] mc: Linux media interface: v0.10 <6>[ 22.975857] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 22.978853] [drm] Initialized imx-lcdif 1.0.0 for 32fc6000.display-controller on minor 0 <6>[ 22.985985] imx-dwmac 30bf0000.ethernet: Enabled L3L4 Flow TC (entries=8) <6>[ 23.001431] imx-dwmac 30bf0000.ethernet: Enabled RFS Flow TC (entries=10) <6>[ 23.001846] etnaviv etnaviv: bound 38000000.gpu (ops gpu_ops [etnaviv]) <6>[ 23.002708] imx-lcdif 32fc6000.display-controller: [drm] Cannot find any crtc or sizes <6>[ 23.008538] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256) <6>[ 23.008547] imx-dwmac 30bf0000.ethernet: Using 34/40 bits DMA host/device width <6>[ 23.039436] etnaviv etnaviv: bound 38008000.gpu (ops gpu_ops [etnaviv]) <6>[ 23.048277] etnaviv etnaviv: bound 38500000.npu (ops gpu_ops [etnaviv]) <6>[ 23.055506] etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6204 <3>[ 23.056824] debugfs: File 'Headphone Jack' in directory 'dapm' already present! <6>[ 23.062992] etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341 <6>[ 23.070011] usbcore: registered new device driver onboard-usb-dev <6>[ 23.076656] etnaviv-gpu 38500000.npu: model: GC8000, revision: 8002 <4>[ 23.089301] etnaviv-gpu 38500000.npu: etnaviv has been instantiated on a NPU, for which the UAPI is still experimental <6>[ 23.089303] usb 1-1.4: USB disconnect, device number 3 <3>[ 23.089601] debugfs: File 'CPU-Playback' in directory 'dapm' already present! <6>[ 23.100921] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 1 <3>[ 23.105756] debugfs: File 'CPU-Capture' in directory 'dapm' already present! <6>[ 23.131761] videodev: Linux video capture interface: v2.00 <6>[ 23.152683] hantro-vpu 38300000.video-codec: registered nxp,imx8mm-vpu-g1-dec as /dev/video0 <6>[ 23.163893] hantro-vpu 38310000.video-codec: registered nxp,imx8mq-vpu-g2-dec as /dev/video1 <6>[ 23.213972] caam algorithms registered in /proc/crypto <6>[ 23.219788] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto <6>[ 23.227486] caam 30900000.crypto: registering rng-caam <6>[ 23.233120] caam 30900000.crypto: rng crypto API alg registered prng-caam <6>[ 23.376945] hub 1-1:1.0: USB hub found <6>[ 23.381048] hub 1-1:1.0: 4 ports detected <6>[ 23.536915] hub 1-1:1.0: USB hub found <6>[ 23.541006] hub 1-1:1.0: 4 ports detected <6>[ 23.696902] hub 1-1:1.0: USB hub found <6>[ 23.700991] hub 1-1:1.0: 4 ports detected <6>[ 23.776918] hub 2-1:1.0: USB hub found <6>[ 23.781016] hub 2-1:1.0: 3 ports detected <4>[ 23.794506] onboard-usb-dev 38200000.usb:usb-hub@1: supply vdd2 not found, using dummy regulator <6>[ 23.856963] hub 1-1:1.0: USB hub found <6>[ 23.861080] hub 1-1:1.0: 4 ports detected done Saving random seed: OK Starting network: OK Starting dropbear sshd: <6>[ 24.019413] NET: Registered PF_INET6 protocol family <6>[ 24.025347] Segment Routing with IPv6 <6>[ 24.029320] In-situ OAM (IOAM) with IPv6 OK /bin/sh: can't access tty; job control turned off / # <6>[ 24.080936] hub 2-1:1.0: USB hub found <6>[ 24.085035] hub 2-1:1.0: 3 ports detected / # # #<6>[ 24.206677] usb 1-1.4: new high-speed USB device number 4 using xhci-hcd / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-681722/environment . /lava-681722/environment / # /lava-681722/bin/lava-test-runner /lava-681722/0 /lava-681722/bin/lava-test-runner /lava-681722/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-681722/0/tes<8>[ 29.639499] ts/0_dmesg + cat uuid + UUID=681722_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 29.664817] <8>[ 29.689183] <8>[ 29.714721] + set +x <8>[ 29.723943] / #