- 04:50:14 [INFO] Starting target session
- 04:50:26 [INFO] Connected to dra71x-evm via serial
- 04:50:26 [INFO] Host: #check prompt
- 04:50:29 [ERROR] On command: #check prompt waiting for #check prompt.+?(?-mix:((?-mix:login:)|[Pp]assword)) >>> error: execution expired
- 04:50:29 [INFO] Target:
#check prompt
/test #
- 04:50:29 [INFO] Host: #check prompt
- 04:50:29 [INFO] Target:
#check prompt
/test #
- 04:50:29 [INFO] Host: sync
- 04:50:29 [INFO] Target:
sync
/test #
- 04:50:29 [INFO] Disconnected serial from dra71x-evm
- 04:50:29 [INFO] Connected to dra71x-evm via serial
- 04:50:29 [INFO] Host:
- 04:50:36 [INFO] Target:
/test #
U-Boot SPL 2021.01-g2ee8efd654 (Feb 23 2023 - 23:52:06 +0000)
DRA722-GP ES2.0
Trying to boot from MMC1
no pinctrl state for default mode
Loading Environment from MMC... OK
U-Boot 2021.01-g2ee8efd654 (Feb 23 2023 - 23:52:06 +0000)
CPU : DRA722-GP ES2.0
Model: TI DRA718 EVM
Board: DRA71x EVM REV A.1
DRAM: 2 GiB
NAND: 256 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from MMC... OK
Net: eth2: ethernet@48484000
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
=>
- 04:50:36 [INFO] Disconnected serial from dra71x-evm
- 04:50:36 [INFO] Connected to dra71x-evm via serial
- 04:50:36 [INFO] Host:
- 04:50:37 [INFO] Target:
=>
- 04:50:37 [INFO] Host: version
- 04:50:37 [INFO] Target:
version
U-Boot 2021.01-g2ee8efd654 (Feb 23 2023 - 23:52:06 +0000)
arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025
GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209
=>
- 04:50:37 [INFO] Host: setenv bootargs 'console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled '
- 04:50:37 [INFO] Target:
setenv bootargs 'console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled '
=>
- 04:50:37 [INFO] Host: setenv bootcmd ''
- 04:50:37 [INFO] Target:
setenv bootcmd ''
=>
- 04:50:37 [INFO] Host: setenv autoload 'no'
- 04:50:37 [INFO] Target:
setenv autoload 'no'
=>
- 04:50:37 [INFO] Host: setenv serverip '192.168.0.1'
- 04:50:38 [INFO] Target:
setenv serverip '192.168.0.1'
=>
- 04:50:38 [INFO] Host: setenv _initramfs -
- 04:50:38 [INFO] Target:
setenv _initramfs -
=>
- 04:50:38 [INFO] Host: printenv
- 04:50:39 [INFO] Target:
printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
autoload=no
baudrate=115200
board=dra7xx
board_name=dra71x
board_rev=A.1
board_serial=unknown
boot_fdt=try
boot_fit=0
bootargs=console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled
bootcmd=
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootfile=zImage
bootm_size=0x10000000
bootpart=0:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv7
dfu_alt_info_emmc=rawemmc raw 0 3751936;boot part 1 1;rootfs part 1 2;MLO fat 1 1;MLO.raw raw 0x100 0x200;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 1 1;spl-os-image fat 1 1;u-boot.img fat 1 1;uEnv.txt fat 1 1
dfu_alt_info_mmc=boot part 0 1;rootfs part 0 2;MLO fat 0 1;MLO.raw raw 0x100 0x200;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 0 1;spl-os-image fat 0 1;u-boot.img fat 0 1;uEnv.txt fat 0 1
dfu_alt_info_qspi=MLO raw 0x0 0x040000;u-boot.img raw 0x040000 0x0100000;u-boot-spl-os raw 0x140000 0x080000;u-boot-env raw 0x1C0000 0x010000;u-boot-env.backup raw 0x1D0000 0x010000;kernel raw 0x1E0000 0x800000
dfu_alt_info_ram=kernel ram 0x80200000 0x4000000;fdt ram 0x80f80000 0x80000;ramdisk ram 0x81000000 0x4000000
dfu_bufsiz=0x10000
dofastboot=0
emmc_android_boot=if bcb load 1 misc; then if bcb test command = bootonce-bootloader; then echo BCB: Bootloader boot...; bcb clear command; bcb store; echo Booting into fastboot ...; fastboot 0; elif bcb test command = boot-recovery; then echo BCB: Recovery boot...; echo Warning: recovery is not implemented; echo Performing normal boot for now...; bcb clear command; bcb store; run emmc_android_normal_boot; else echo BCB: Normal boot requested...; run emmc_android_normal_boot; fi; else echo Warning: BCB is corrupted or does not exist; echo Performing normal boot...; run emmc_android_normal_boot; fi;
emmc_android_normal_boot=echo Trying to boot Android from eMMC ...; run update_to_fit; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv mmcdev 1; setenv machid fe6; mmc dev $mmcdev; mmc rescan; if part start mmc ${mmcdev} boot${slot_suffix} boot_start; then part size mmc ${mmcdev} boot${slot_suffix} boot_size; mmc read ${loadaddr} ${boot_start} ${boot_size}; bootm ${loadaddr}#${fdtfile}; else echo boot${slot_suffix} partition not found; fi;
emmc_linux_boot=echo Trying to boot Linux from eMMC ...; setenv mmcdev 1; setenv bootpart 1:2; setenv mmcroot /dev/mmcblk0p2 rw; run mmcboot;
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi;
eth2addr=04:a3:16:dd:13:74
fastboot.board_rev=A.1
fastboot.cpu=DRA722
fastboot.product=dra71x
fastboot.secure=GP
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fcf18dd0
fdtfile=undefined
findfdt=if test $board_name = omap5_uevm; then setenv fdtfile omap5-uevm.dtb; fi; if test $board_name = dra7xx; then setenv fdtfile dra7-evm.dtb; fi;if test $board_name = dra72x-revc; then setenv fdtfile dra72-evm-revc.dtb; fi;if test $board_name = dra72x; then setenv fdtfile dra72-evm.dtb; fi;if test $board_name = dra71x && test $boot_nand = 1; then setenv fdtfile dra71-evm-nand.dtb; fi;if test $board_name = dra71x && test $boot_nand = 0; then setenv fdtfile dra71-evm.dtb; fi;if test $board_name = dra76x_acd; then setenv fdtfile dra76-evm.dtb; fi;if test $board_name = beagle_x15; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = beagle_x15_revb1; then setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;if test $board_name = beagle_x15_revc; then setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;if test $board_name = am5729_beagleboneai; then setenv fdtfile am5729-beagleboneai.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = no; then setenv fdtfile am572x-idk.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am572x-idk-lcd-osd101t2045.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am572x-idk-lcd-osd101t2587.dtb; fi;if test $board_name = am574x_idk && test $idk_lcd = no; then setenv fdtfile am574x-idk.dtb; fi;if test $board_name = am574x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am574x-idk-lcd-osd101t2587.dtb; fi;if test $board_name = am57xx_evm; then setenv fdtfile am57xx-evm.dtb; fi;if test $board_name = am57xx_evm_reva3; then setenv fdtfile am57xx-evm-reva3.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = no; then setenv fdtfile am571x-idk.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am571x-idk-lcd-osd101t2045.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am571x-idk-lcd-osd101t2587.dtb; fi;if test $fdtfile = undefined; then echo WARNING: Could not determine device tree to use; fi;
finduuid=part uuid mmc ${bootpart} uuid
get_overlaystring=for overlay in $name_overlays;do;setenv overlaystring ${overlaystring}'#'${overlay};done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
kernel_addr_r=0x82000000
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; setenv devtype mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados;fi;fi;fi;
mmcdev=0
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
mtdids=nand0=nand.0
mtdparts=mtdparts=nand.0:256k(NAND.SPL),256k(NAND.SPL.backup1),256k(NAND.SPL.backup2),256k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),2m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)
name_fit=fitImage
nandargs=setenv bootargs console=${console} ${optargs} root=${nandroot} rootfstype=${nandrootfstype}
nandboot=echo Booting from nand ...; run nandargs; nand read ${fdtaddr} NAND.u-boot-spl-os; nand read ${loadaddr} NAND.kernel; bootz ${loadaddr} - ${fdtaddr}
nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048
nandrootfstype=ubifs rootwait=1
netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp
netboot=echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; bootz ${loadaddr} - ${fdtaddr}
netloadfdt=tftp ${fdtaddr} ${fdtfile}
netloadimage=tftp ${loadaddr} ${bootfile}
nfsopts=nolock
partitions=uuid_disk=${uuid_gpt_disk};name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}
partitions_android=uuid_disk=${uuid_gpt_disk};name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};name=misc,size=128K,uuid=${uuid_gpt_misc};name=recovery,size=40M,uuid=${uuid_gpt_recovery};name=boot,size=20M,uuid=${uuid_gpt_boot};name=system,size=1024M,uuid=${uuid_gpt_system};name=vendor,size=256M,uuid=${uuid_gpt_vendor};name=userdata,size=-,uuid=${uuid_gpt_userdata}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rdaddr=0x88080000
rootpath=/export/rootfs
run_fit=bootm ${addr_fit}#${fdtfile}${overlaystring}
scriptaddr=0x80000000
serial#=120080127b620001
serverip=192.168.0.1
soc=omap5
static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off
stderr=serial@4806a000
stdin=serial@4806a000
stdout=serial@4806a000
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
usbtty=cdc_acm
vendor=ti
ver=U-Boot 2021.01-g2ee8efd654 (Feb 23 2023 - 23:52:06 +0000)
vram=16M
Environment size: 8523/131067 bytes
=>
- 04:50:39 [INFO] Host: printenv bootargs
- 04:50:39 [INFO] Target:
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled
=>
- 04:50:39 [INFO] Host: setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
- 04:50:39 [INFO] Target:
setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
=>
- 04:50:39 [INFO] Host: setenv serverip '192.168.0.1'
- 04:50:39 [INFO] Target:
setenv serverip '192.168.0.1'
=>
- 04:50:39 [INFO] Host: setenv autoload 'no'
- 04:50:40 [INFO] Target:
setenv autoload 'no'
=>
- 04:50:40 [INFO] Host: dhcp
- 04:50:41 [INFO] Target:
dhcp
link up on port 0, speed 1000, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.0.39 (1050 ms)
=>
- 04:50:41 [INFO] Host: tftp ${loadaddr} 192.168.0.1:vatf_dra71x-evm-ep/d37beda3e2c836655d740b7f8bcbe28f
- 04:50:51 [INFO] Target:
tftp ${loadaddr} 192.168.0.1:vatf_dra71x-evm-ep/d37beda3e2c836655d740b7f8bcbe28f
link up on port 0, speed 1000, full duplex
Using ethernet@48484000 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.39
Filename 'vatf_dra71x-evm-ep/d37beda3e2c836655d740b7f8bcbe28f'.
Load address: 0x82000000
Loading: *#T ################################################################
#################################################################
#################################################################
#################################################################
#################################################################
########################################
498 KiB/s
done
Bytes transferred = 5345744 (5191d0 hex)
=>
- 04:50:51 [INFO] Host: tftp ${fdt_addr_r} 192.168.0.1:vatf_dra71x-evm-ep/53fb10097f592958d48422ab8294c6e0
- 04:50:52 [INFO] Target:
tftp ${fdt_addr_r} 192.168.0.1:vatf_dra71x-evm-ep/53fb10097f592958d48422ab8294c6e0
link up on port 0, speed 1000, full duplex
Using ethernet@48484000 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.39
Filename 'vatf_dra71x-evm-ep/53fb10097f592958d48422ab8294c6e0'.
Load address: 0x88000000
Loading: *###########
9.4 MiB/s
done
Bytes transferred = 148048 (24250 hex)
=>
- 04:50:52 [INFO] Host: fdt address ${fdt_addr_r}
- 04:50:52 [INFO] Target:
fdt address ${fdt_addr_r}
=>
- 04:50:52 [INFO] Host: printenv bootargs
- 04:50:52 [INFO] Target:
printenv bootargs
bootargs=console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
=>
- 04:50:52 [INFO] Host: setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/dra71x-evm2/autofs/29d150f62ef8c1505ae043eeb678acc5,nolock,v3,tcp,rsize=4096,wsize=4096 '
- 04:50:52 [INFO] Target:
setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/dra71x-evm2/autofs/29d150f62ef8c1505ae043eeb678acc5,nolock,v3,tcp,rsize=4096,wsize=4096 '
=>
- 04:50:52 [INFO] Host: printenv bootcmd
- 04:50:52 [INFO] Target:
printenv bootcmd
bootcmd=
=>
- 04:50:52 [INFO] Host: setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
- 04:50:53 [INFO] Target:
setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
=>
- 04:50:53 [INFO] Host: version
- 04:50:53 [INFO] Target:
version
U-Boot 2021.01-g2ee8efd654 (Feb 23 2023 - 23:52:06 +0000)
arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025
GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209
=>
- 04:50:53 [INFO] Host: bdinfo
- 04:50:53 [INFO] Target:
bdinfo
boot_params = 0x80000100
DRAM bank = 0x00000000
-> start = 0x80000000
-> size = 0x7f000000
flashstart = 0x00000000
flashsize = 0x00000000
flashoffset = 0x00000000
baudrate = 115200 bps
relocaddr = 0xfef5b000
reloc off = 0x7e75b000
Build = 32-bit
current eth = ethernet@48484000
ethaddr = (not set)
IP addr = 192.168.0.39
fdt_blob = 0xfcf18dd0
new_fdt = 0xfcf18dd0
fdt_size = 0x000220e0
lmb_dump_all:
memory.cnt = 0x1
memory.size = 0x0
memory.reg[0x0].base = 0x80000000
.size = 0x7f000000
reserved.cnt = 0x1
reserved.size = 0x0
reserved.reg[0x0].base = 0xfcf17af8
.size = 0x20e8508
arch_number = 0x00000000
TLB addr = 0xfeff0000
irq_sp = 0xfcf18dc0
sp start = 0xfcf18db0
Early malloc usage: 10a4 / 18000
=>
- 04:50:53 [INFO] Host:
- 04:50:53 [INFO] Target:
boot_params = 0x80000100
DRAM bank = 0x00000000
-> start = 0x80000000
-> size = 0x7f000000
flashstart = 0x00000000
flashsize = 0x00000000
flashoffset = 0x00000000
baudrate = 115200 bps
relocaddr = 0xfef5b000
reloc off = 0x7e75b000
Build = 32-bit
current eth = ethernet@48484000
ethaddr = (not set)
IP addr = 192.168.0.39
fdt_blob = 0xfcf18dd0
new_fdt = 0xfcf18dd0
fdt_size = 0x000220e0
lmb_dump_all:
memory.cnt = 0x1
memory.size = 0x0
memory.reg[0x0].base = 0x80000000
.size = 0x7f000000
reserved.cnt = 0x1
reserved.size = 0x0
reserved.reg[0x0].base = 0xfcf17af8
.size = 0x20e8508
arch_number = 0x00000000
TLB addr = 0xfeff0000
irq_sp = 0xfcf18dc0
sp start = 0xfcf18db0
Early malloc usage: 10a4 / 18000
=>
- 04:50:53 [INFO] Host: ls mmc 0:1
- 04:50:54 [INFO] Target:
ls mmc 0:1
180384 MLO
1285472 u-boot.img
4 ws-calibrate.rules
3 file(s), 0 dir(s)
=>
- 04:50:54 [INFO] Host: ls mmc 1:1
- 04:50:54 [INFO] Target:
ls mmc 1:1
43 ws-calibrate.rules
129499 MLO
129499 MLO-old
3 file(s), 0 dir(s)
=>
- 04:50:54 [INFO] Host: ext4ls mmc 0:2 /lib/firmware
- 04:50:54 [INFO] Target:
ext4ls mmc 0:2 /lib/firmware
4096 .
4096 ..
2040 LICENCE.ibt_firmware
2046 LICENCE.iwlwifi_firmware
49 am57xx-pru1_0-fw
49 am57xx-pru1_1-fw
49 am57xx-pru2_0-fw
49 am57xx-pru2_1-fw
9941039 dra7-dsp1-fw-radio.xe66
55 dra7-dsp1-fw.xe66
20893036 dra7-dsp1-fw.xe66.opencl-monitor
55 dra7-dsp2-fw.xe66
20893036 dra7-dsp2-fw.xe66.opencl-monitor
55 dra7-ipu1-fw.xem4
7016760 dra7-ipu1-fw.xem4.opencl-monitor
40 dra7-ipu2-fw.xem4
3747248 dra7-ipu2-fw.xem4.ipumm-fw
582866 dra7-ipu2-fw.xem4.map
186 goodix_9271_cfg.bin
4096 intel
4096 ipc
918268 iwlwifi-3160-17.ucode
2120860 iwlwifi-8000C-22.ucode
2227284 iwlwifi-8000C-27.ucode
2310116 iwlwifi-8000C-31.ucode
2448976 iwlwifi-8000C-34.ucode
2428004 iwlwifi-8000C-36.ucode
1811984 iwlwifi-8265-22.ucode
2234528 iwlwifi-8265-27.ucode
2307104 iwlwifi-8265-31.ucode
2440780 iwlwifi-8265-34.ucode
2436632 iwlwifi-8265-36.ucode
2637216 iwlwifi-9260-th-b0-jf-b0-33.ucode
2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode
2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode
2620656 iwlwifi-9260-th-b0-jf-b0-41.ucode
2558176 iwlwifi-9260-th-b0-jf-b0-43.ucode
1489668 iwlwifi-9260-th-b0-jf-b0-46.ucode
4096 pru
4592 regulatory.db
1182 regulatory.db.p7s
4096 ti-connectivity
4002 vpdma-1b8.bin
=>
- 04:50:54 [INFO] Host: ext4ls mmc 1:2 /lib/firmware
- 04:50:54 [INFO] Target:
ext4ls mmc 1:2 /lib/firmware
** Unrecognized filesystem type **
=>
- 04:50:54 [INFO] Host: mmc rescan; echo $?
- 04:50:55 [INFO] Target:
mmc rescan; echo $?
0
=>
- 04:50:55 [INFO] Host: fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
- 04:50:55 [INFO] Target:
fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
4 bytes written in 3 ms (1000 Bytes/s)
=>
- 04:50:55 [INFO] Host: setenv extraargs 0
- 04:50:55 [INFO] Target:
setenv extraargs 0
=>
- 04:50:55 [INFO] Host: printenv
- 04:50:56 [INFO] Target:
printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
autoload=no
baudrate=115200
board=dra7xx
board_name=dra71x
board_rev=A.1
board_serial=unknown
boot_fdt=try
boot_fit=0
bootargs=console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/dra71x-evm2/autofs/29d150f62ef8c1505ae043eeb678acc5,nolock,v3,tcp,rsize=4096,wsize=4096
bootcmd= if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootfile=zImage
bootm_size=0x10000000
bootpart=0:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv7
dfu_alt_info_emmc=rawemmc raw 0 3751936;boot part 1 1;rootfs part 1 2;MLO fat 1 1;MLO.raw raw 0x100 0x200;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 1 1;spl-os-image fat 1 1;u-boot.img fat 1 1;uEnv.txt fat 1 1
dfu_alt_info_mmc=boot part 0 1;rootfs part 0 2;MLO fat 0 1;MLO.raw raw 0x100 0x200;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 0 1;spl-os-image fat 0 1;u-boot.img fat 0 1;uEnv.txt fat 0 1
dfu_alt_info_qspi=MLO raw 0x0 0x040000;u-boot.img raw 0x040000 0x0100000;u-boot-spl-os raw 0x140000 0x080000;u-boot-env raw 0x1C0000 0x010000;u-boot-env.backup raw 0x1D0000 0x010000;kernel raw 0x1E0000 0x800000
dfu_alt_info_ram=kernel ram 0x80200000 0x4000000;fdt ram 0x80f80000 0x80000;ramdisk ram 0x81000000 0x4000000
dfu_bufsiz=0x10000
dnsip=192.0.2.2
dnsip2=192.0.2.3
dofastboot=0
emmc_android_boot=if bcb load 1 misc; then if bcb test command = bootonce-bootloader; then echo BCB: Bootloader boot...; bcb clear command; bcb store; echo Booting into fastboot ...; fastboot 0; elif bcb test command = boot-recovery; then echo BCB: Recovery boot...; echo Warning: recovery is not implemented; echo Performing normal boot for now...; bcb clear command; bcb store; run emmc_android_normal_boot; else echo BCB: Normal boot requested...; run emmc_android_normal_boot; fi; else echo Warning: BCB is corrupted or does not exist; echo Performing normal boot...; run emmc_android_normal_boot; fi;
emmc_android_normal_boot=echo Trying to boot Android from eMMC ...; run update_to_fit; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv mmcdev 1; setenv machid fe6; mmc dev $mmcdev; mmc rescan; if part start mmc ${mmcdev} boot${slot_suffix} boot_start; then part size mmc ${mmcdev} boot${slot_suffix} boot_size; mmc read ${loadaddr} ${boot_start} ${boot_size}; bootm ${loadaddr}#${fdtfile}; else echo boot${slot_suffix} partition not found; fi;
emmc_linux_boot=echo Trying to boot Linux from eMMC ...; setenv mmcdev 1; setenv bootpart 1:2; setenv mmcroot /dev/mmcblk0p2 rw; run mmcboot;
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi;
eth2addr=04:a3:16:dd:13:74
ethact=ethernet@48484000
extraargs=0
fastboot.board_rev=A.1
fastboot.cpu=DRA722
fastboot.product=dra71x
fastboot.secure=GP
fdt_addr_r=0x88000000
fdtaddr=88000000
fdtcontroladdr=fcf18dd0
fdtfile=undefined
fileaddr=88000000
filesize=24250
findfdt=if test $board_name = omap5_uevm; then setenv fdtfile omap5-uevm.dtb; fi; if test $board_name = dra7xx; then setenv fdtfile dra7-evm.dtb; fi;if test $board_name = dra72x-revc; then setenv fdtfile dra72-evm-revc.dtb; fi;if test $board_name = dra72x; then setenv fdtfile dra72-evm.dtb; fi;if test $board_name = dra71x && test $boot_nand = 1; then setenv fdtfile dra71-evm-nand.dtb; fi;if test $board_name = dra71x && test $boot_nand = 0; then setenv fdtfile dra71-evm.dtb; fi;if test $board_name = dra76x_acd; then setenv fdtfile dra76-evm.dtb; fi;if test $board_name = beagle_x15; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = beagle_x15_revb1; then setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;if test $board_name = beagle_x15_revc; then setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;if test $board_name = am5729_beagleboneai; then setenv fdtfile am5729-beagleboneai.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = no; then setenv fdtfile am572x-idk.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am572x-idk-lcd-osd101t2045.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am572x-idk-lcd-osd101t2587.dtb; fi;if test $board_name = am574x_idk && test $idk_lcd = no; then setenv fdtfile am574x-idk.dtb; fi;if test $board_name = am574x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am574x-idk-lcd-osd101t2587.dtb; fi;if test $board_name = am57xx_evm; then setenv fdtfile am57xx-evm.dtb; fi;if test $board_name = am57xx_evm_reva3; then setenv fdtfile am57xx-evm-reva3.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = no; then setenv fdtfile am571x-idk.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am571x-idk-lcd-osd101t2045.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am571x-idk-lcd-osd101t2587.dtb; fi;if test $fdtfile = undefined; then echo WARNING: Could not determine device tree to use; fi;
finduuid=part uuid mmc ${bootpart} uuid
gatewayip=192.168.0.1
get_overlaystring=for overlay in $name_overlays;do;setenv overlaystring ${overlaystring}'#'${overlay};done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
ipaddr=192.168.0.39
kernel_addr_r=0x82000000
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; setenv devtype mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados;fi;fi;fi;
mmcdev=0
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
mtdids=nand0=nand.0
mtdparts=mtdparts=nand.0:256k(NAND.SPL),256k(NAND.SPL.backup1),256k(NAND.SPL.backup2),256k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),2m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)
name_fit=fitImage
nandargs=setenv bootargs console=${console} ${optargs} root=${nandroot} rootfstype=${nandrootfstype}
nandboot=echo Booting from nand ...; run nandargs; nand read ${fdtaddr} NAND.u-boot-spl-os; nand read ${loadaddr} NAND.kernel; bootz ${loadaddr} - ${fdtaddr}
nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048
nandrootfstype=ubifs rootwait=1
netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp
netboot=echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; bootz ${loadaddr} - ${fdtaddr}
netloadfdt=tftp ${fdtaddr} ${fdtfile}
netloadimage=tftp ${loadaddr} ${bootfile}
netmask=255.255.255.0
nfsopts=nolock
partitions=uuid_disk=${uuid_gpt_disk};name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}
partitions_android=uuid_disk=${uuid_gpt_disk};name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};name=misc,size=128K,uuid=${uuid_gpt_misc};name=recovery,size=40M,uuid=${uuid_gpt_recovery};name=boot,size=20M,uuid=${uuid_gpt_boot};name=system,size=1024M,uuid=${uuid_gpt_system};name=vendor,size=256M,uuid=${uuid_gpt_vendor};name=userdata,size=-,uuid=${uuid_gpt_userdata}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rdaddr=0x88080000
rootpath=/export/rootfs
run_fit=bootm ${addr_fit}#${fdtfile}${overlaystring}
scriptaddr=0x80000000
serial#=120080127b620001
serverip=192.168.0.1
soc=omap5
static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off
stderr=serial@4806a000
stdin=serial@4806a000
stdout=serial@4806a000
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
usbtty=cdc_acm
vendor=ti
ver=U-Boot 2021.01-g2ee8efd654 (Feb 23 2023 - 23:52:06 +0000)
vram=16M
Environment size: 9033/131067 bytes
=>
- 04:50:56 [INFO] Host: setenv bootcmd 'if iminfo ${loadaddr}; then setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
- 04:50:57 [INFO] Target:
setenv bootcmd 'if iminfo ${loadaddr}; then setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
=>
- 04:50:57 [INFO] Host: setenv emmc_android_normal_boot 'echo Trying to boot Android from eMMC ...; run update_to_fit; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv mmcdev 1; setenv machid fe6; mmc dev $mmcdev; mmc rescan; if part start mmc ${mmcdev} boot${slot_suffix} boot_start; then part size mmc ${mmcdev} boot${slot_suffix} boot_size; mmc read ${loadaddr} ${boot_start} ${boot_size}; setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr}#${fdtfile}; else echo boot${slot_suffix} partition not found; fi;'
- 04:50:57 [INFO] Target:
setenv emmc_android_normal_boot 'echo Trying to boot Android from eMMC ...; run update_to_fit; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv mmcdev 1; setenv machid fe6; mmc dev $mmcdev; mmc rescan; if part start mmc ${mmcdev} boot${slot_suffix} boot_start; then part size mmc ${mmcdev} boot${slot_suffix} boot_size; mmc read ${loadaddr} ${boot_start} ${boot_size}; setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr}#${fdtfile}; else echo boot${slot_suffix} partition not found; fi;'
=>
- 04:50:57 [INFO] Host: setenv mmcloados 'if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;'
- 04:50:57 [INFO] Target:
setenv mmcloados 'if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;'
=>
- 04:50:57 [INFO] Host: setenv nandboot 'echo Booting from nand ...; run nandargs; nand read ${fdtaddr} NAND.u-boot-spl-os; nand read ${loadaddr} NAND.kernel; setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} - ${fdtaddr}'
- 04:50:57 [INFO] Target:
setenv nandboot 'echo Booting from nand ...; run nandargs; nand read ${fdtaddr} NAND.u-boot-spl-os; nand read ${loadaddr} NAND.kernel; setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} - ${fdtaddr}'
=>
- 04:50:57 [INFO] Host: setenv netboot 'echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} - ${fdtaddr}'
- 04:50:57 [INFO] Target:
setenv netboot 'echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} - ${fdtaddr}'
=>
- 04:50:57 [INFO] Host: setenv run_fit 'setenv bootargs ${bootargs} ${extraargs}; bootm ${addr_fit}#${fdtfile}${overlaystring}'
- 04:50:58 [INFO] Target:
setenv run_fit 'setenv bootargs ${bootargs} ${extraargs}; bootm ${addr_fit}#${fdtfile}${overlaystring}'
=>
- 04:50:58 [INFO] Host: boot
- 04:50:58 [INFO] Target:
boot
## Checking Image at 82000000 ...
Unknown image format!
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Device Tree to 8ffd8000, end 8ffff24f ... OK
ft_fixup_clocks failed for DSP voltage domain:
Starting kernel ...
- 04:50:58 [INFO] Host:
- 04:51:23 [INFO] Target:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.11.0-rc6 (KernelCI@build-j308018-arm-gcc-12-omap2plus-defconfig-4qxw7) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Sep 5 01:47:56 UTC 2024
[ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: TI DRA718 EVM
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56 MiB
[ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x95800000..0x98ffffff (57344 KiB) map reusable ipu2-memory@95800000
[ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x99000000..0x9cffffff (65536 KiB) map reusable dsp1-memory@99000000
[ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB
[ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x9d000000..0x9effffff (32768 KiB) map reusable ipu1-memory@9d000000
[ 0.000000] cma: Reserved 16 MiB at 0xfe000000 on node -1
[ 0.000000] OMAP4: Map 0xafe00000 to (ptrval) for dram barrier
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x00000000afdfffff]
[ 0.000000] HighMem [mem 0x00000000afe00000-0x00000000feffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000afdfffff]
[ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000feffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000feffffff]
[ 0.000000] On node 0, zone HighMem: 512 pages in unavailable ranges
[ 0.000000] DRA722 ES2.0
[ 0.000000] percpu: Embedded 17 pages/cpu s39884 r8192 d21556 u69632
[ 0.000000] Kernel command line: console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/dra71x-evm2/autofs/29d150f62ef8c1505ae043eeb678acc5,nolock,v3,tcp,rsize=4096,wsize=4096 0
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] Unknown kernel command line parameters "0 earlyprintk=serial,ttyO0,115200n8", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 519680
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[ 0.000030] sched_clock: 32 bits at 33kHz, resolution 30517ns, wraps every 65535999984741ns
[ 0.001464] TI gptimer clockevent: always-on 32786 Hz at /ocp/interconnect@4ae00000/segment@10000/target-module@8000
[ 0.003112] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2c000
[ 0.003173] Failed to initialize '/ocp/interconnect@48800000/segment@0/target-module@2e000/timer@0': -22
[ 0.003936] Console: colour dummy device 80x30
[ 0.003967] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.003997] This ensures that you still see kernel messages. Please
[ 0.003997] update your kernel commandline.
[ 0.004028] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)
[ 0.062103] CPU: Testing write buffer coherency: ok
[ 0.062133] CPU0: Spectre v2: using ICIALLU workaround
[ 0.062133] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[ 0.062164] pid_max: default: 32768 minimum: 301
[ 0.062225] LSM: initializing lsm=capability
[ 0.062316] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.062347] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.063110] /cpus/cpu@0 missing clock-frequency property
[ 0.063140] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.063995] Setting up static identity map for 0x80100000 - 0x80100078
[ 0.064147] rcu: Hierarchical SRCU implementation.
[ 0.064147] rcu: Max phase no-delay instances is 1000.
[ 0.064697] smp: Bringing up secondary CPUs ...
[ 0.064727] smp: Brought up 1 node, 1 CPU
[ 0.064727] SMP: Total of 1 processors activated (1993.93 BogoMIPS).
[ 0.064727] CPU: All CPU(s) started in HYP mode.
[ 0.064758] CPU: Virtualization extensions available.
[ 0.064819] Memory: 1868004K/2078720K available (11264K kernel code, 1142K rwdata, 2696K rodata, 1024K init, 291K bss, 36844K reserved, 172032K cma-reserved, 1277952K highmem)
[ 0.065185] devtmpfs: initialized
[ 0.089233] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.089447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.089447] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.092193] pinctrl core: initialized pinctrl subsystem
[ 0.093597] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.095214] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.095794] audit: initializing netlink subsys (disabled)
[ 0.096435] thermal_sys: Registered thermal governor 'fair_share'
[ 0.096435] thermal_sys: Registered thermal governor 'step_wise'
[ 0.096466] thermal_sys: Registered thermal governor 'user_space'
[ 0.096496] audit: type=2000 audit(0.090:1): state=initialized audit_enabled=0 res=1
[ 0.096527] cpuidle: using governor menu
[ 0.129486] platform ocp: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm_core@0/clock@e00/clock@20
[ 0.129547] platform ocp: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm_core@0/clock@700/clock@20
[ 0.133972] platform connector: Fixed dependency cycle(s) with /encoder
[ 0.134063] platform encoder: Fixed dependency cycle(s) with /connector
[ 0.134155] platform encoder: Fixed dependency cycle(s) with /ocp/target-module@58000000/dss@0/target-module@40000/encoder@0
[ 0.135314] No ATAGs?
[ 0.135375] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.135375] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.139495] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.154998] iommu: Default domain type: Translated
[ 0.154998] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.163177] SCSI subsystem initialized
[ 0.163574] pps_core: LinuxPPS API ver. 1 registered
[ 0.163574] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.163604] PTP clock support registered
[ 0.175262] vgaarb: loaded
[ 0.175384] clocksource: Switched to clocksource 32k_counter
[ 0.175689] VFS: Disk quotas dquot_6.6.0
[ 0.175720] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.195831] NET: Registered PF_INET protocol family
[ 0.196014] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.197387] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.197418] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.197448] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.197509] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.197723] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.197814] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.197845] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.197967] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.198516] RPC: Registered named UNIX socket transport module.
[ 0.198516] RPC: Registered udp transport module.
[ 0.198516] RPC: Registered tcp transport module.
[ 0.198516] RPC: Registered tcp-with-tls transport module.
[ 0.198547] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.198547] PCI: CLS 0 bytes, default 64
[ 0.199401] Initialise system trusted keyrings
[ 0.205749] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.206329] NFS: Registering the id_resolver key type
[ 0.206390] Key type id_resolver registered
[ 0.206390] Key type id_legacy registered
[ 0.206420] jffs2: version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
[ 0.206634] Key type asymmetric registered
[ 0.206665] Asymmetric key parser 'x509' registered
[ 0.206726] bounce: pool size: 64 pages
[ 0.206756] io scheduler mq-deadline registered
[ 0.206756] io scheduler kyber registered
[ 0.206787] io scheduler bfq registered
[ 0.215515] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[ 0.239654] brd: module loaded
[ 0.250427] loop: module loaded
[ 0.251129] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.259521] i2c_dev: i2c /dev entries driver
[ 0.260314] cpu cpu0: error -ENODEV: _opp_set_regulators: no regulator (vdd) found
[ 0.260375] cpu cpu0: error -ENODEV: Failed to set OPP config
[ 0.260650] sdhci: Secure Digital Host Controller Interface driver
[ 0.260650] sdhci: Copyright(c) Pierre Ossman
[ 0.260833] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.261047] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.274139] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.274475] Initializing XFRM netlink socket
[ 0.274505] NET: Registered PF_INET6 protocol family
[ 0.275390] Segment Routing with IPv6
[ 0.275482] In-situ OAM (IOAM) with IPv6
[ 0.275573] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.276062] NET: Registered PF_PACKET protocol family
[ 0.276092] NET: Registered PF_KEY protocol family
[ 0.276153] Key type dns_resolver registered
[ 0.276275] ThumbEE CPU extension supported.
[ 0.276275] Registering SWP/SWPB emulation handler
[ 0.276733] omap_voltage_late_init: Voltage driver support not added
[ 0.276733] sr_init_by_name: Unable to get voltage domain pointer for VDD mpu
[ 0.276763] sr_init_by_name: Unable to get voltage domain pointer for VDD core
[ 0.276763] Power Management for TI OMAP4+ devices.
[ 0.277008] SmartReflex Class3 initialized
[ 0.297485] Loading compiled-in X.509 certificates
[ 0.365234] platform 4a000000.interconnect: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm_core@0/clock@d00/clock@20
[ 0.370208] pinctrl-single 4a003400.pinmux: 282 pins, size 1128
[ 0.388061] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[ 0.431396] OMAP GPIO hardware version 0.1
[ 0.444793] ti-sysc 4ae18000.target-module: probe with driver ti-sysc failed with error -16
[ 0.510070] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 109, base_baud = 3000000) is a 8250
[ 0.510131] printk: legacy console [ttyS0] enabled
[ 1.895996] pcf857x 0-0020: probed
[ 1.906158] pcf857x 0-0021: probed
[ 1.918548] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.946990] lp8733-ldo0: Bringing 2500000uV into 3300000-3300000uV
[ 1.978271] pcf857x 4-0026: probed
[ 1.981842] i2c 4-003c: Fixed dependency cycle(s) with /ocp/interconnect@48400000/target-module@5b000/cal@0
[ 1.991760] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
[ 2.011535] ocp:target-module@48210000:mpu:fck: device ID is greater than 24
[ 2.095458] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ 2.110382] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver TI DP83867
[ 2.118743] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver TI DP83867
[ 2.127685] cpsw-switch 48484000.switch: initialized cpsw ale version 1.4
[ 2.134521] cpsw-switch 48484000.switch: ALE Table size 1024
[ 2.140319] cpsw-switch 48484000.switch: cpts: overflow check period 500 (jiffies)
[ 2.147979] cpsw-switch 48484000.switch: CPTS: ref_clk_freq:266000000 calc_mult:4036623398 calc_shift:30 error:-1 nsec/sec
[ 2.159118] cpsw-switch 48484000.switch: Detected MACID = 04:a3:16:dd:13:74
[ 2.166168] cpsw-switch 48484000.switch: Detected MACID = 04:a3:16:dd:13:75
[ 2.175109] cpsw-switch 48484000.switch: initialized (regs 0x48484000, pool size 256) hw_ver:0019010F 1.15 (0)
[ 2.186798] i2c 4-003c: Fixed dependency cycle(s) with /ocp/interconnect@48400000/target-module@5b000/cal@0
[ 2.196685] platform 4845b000.cal: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@0/target-module@7c000/i2c@0/ov5640@3c
[ 2.220184] ti-sysc 4882c000.target-module: probe with driver ti-sysc failed with error -16
[ 2.229187] ti-sysc 4882e000.target-module: probe with driver ti-sysc failed with error -16
[ 2.249938] platform 51000000.pcie: Fixed dependency cycle(s) with /ocp/target-module@51000000/pcie@51000000/interrupt-controller
[ 2.262664] dra7-pcie 51000000.pcie: host bridge /ocp/target-module@51000000/pcie@51000000 ranges:
[ 2.271759] dra7-pcie 51000000.pcie: IO 0x0020003000..0x0020012fff -> 0x0000000000
[ 2.279937] dra7-pcie 51000000.pcie: MEM 0x0020013000..0x002fffffff -> 0x0020013000
[ 2.290130] dra7-pcie 51000000.pcie: iATU: unroll F, 16 ob, 4 ib, align 4K, limit 4G
[ 3.395446] dra7-pcie 51000000.pcie: Phy link never came up
[ 3.401641] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00
[ 3.407989] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.413513] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 3.419738] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[ 3.426696] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400 PCIe Root Port
[ 3.434051] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x000fffff]
[ 3.440032] pci 0000:00:00.0: BAR 1 [mem 0x00000000-0x0000ffff]
[ 3.445983] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 3.451232] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 3.457397] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 3.464202] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 3.471527] pci 0000:00:00.0: supports D1
[ 3.475585] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 3.488250] PCI: bus0: Fast back to back transfers disabled
[ 3.494140] PCI: bus1: Fast back to back transfers enabled
[ 3.499694] pci 0000:00:00.0: BAR 0 [mem 0x20100000-0x201fffff]: assigned
[ 3.506561] pci 0000:00:00.0: BAR 1 [mem 0x20020000-0x2002ffff]: assigned
[ 3.513397] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 3.518646] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 3.524261] pci_bus 0000:00: resource 5 [mem 0x20013000-0x2fffffff]
[ 3.530761] genirq: Threaded irq requested with handler=NULL and !ONESHOT for dra7xx-pcie-main (irq 126)
[ 3.540374] dra7-pcie 51000000.pcie: failed to request irq
[ 3.545959] dra7-pcie 51000000.pcie: probe with driver dra7-pcie failed with error -22
[ 3.559783] pcie-clkctrl:0000:0: failed to disable
[ 3.569793] edma 43300000.dma: memcpy is disabled
[ 3.577758] edma 43300000.dma: TI EDMA DMA engine driver
[ 3.588043] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[ 3.595001] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[ 3.602172] omap-iommu 58882000.mmu: 58882000.mmu registered
[ 3.609466] omap-iommu 55082000.mmu: 55082000.mmu registered
[ 3.627044] 5a05a400.target-module:iva:fck: device ID is greater than 24
[ 3.634429] ti-sysc 4ae06000.target-module: Failed to create device link (0x180) with ocp
[ 3.648162] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)
[ 3.657043] sdhci-omap 4809c000.mmc: Got CD GPIO
[ 3.664276] sdhci-omap 480d1000.mmc: supply pbias not found, using dummy regulator
[ 3.672729] sdhci-omap 480d1000.mmc: no pinctrl state for sdr104 mode
[ 3.679260] sdhci-omap 480d1000.mmc: no pinctrl state for ddr50 mode
[ 3.685668] sdhci-omap 480d1000.mmc: no pinctrl state for sdr50 mode
[ 3.692047] sdhci-omap 480d1000.mmc: no pinctrl state for hs200_1_8v mode
[ 3.698944] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_1_8v mode
[ 3.705627] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
[ 3.712280] sdhci-omap 4809c000.mmc: no pinctrl state for hs200_1_8v mode
[ 3.746398] mmc1: SDHCI controller on 480d1000.mmc [480d1000.mmc] using PIO
[ 3.753662] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA
[ 3.762145] sdhci-omap 480b4000.mmc: supply pbias not found, using dummy regulator
[ 3.793334] mmc2: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA
[ 3.800842] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
[ 3.825134] TI DP83867 48485000.mdio:02: attached PHY driver (mii_bus:phy_addr=48485000.mdio:02, irq=POLL)
[ 3.886657] mmc2: new HS200 MMC card at address 0001
[ 3.892181] mmcblk2: mmc2:0001 MMC08G 7.25 GiB
[ 3.898101] mmcblk2: p1 p2 p3
[ 3.902130] mmcblk2boot0: mmc2:0001 MMC08G 8.00 MiB
[ 3.908538] mmcblk2boot1: mmc2:0001 MMC08G 8.00 MiB
[ 3.914581] mmcblk2rpmb: mmc2:0001 MMC08G 128 KiB, chardev (250:0)
[ 3.938537] mmc1: Failed to initialize a non-removable card
[ 4.135925] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 4.148712] mmcblk0: mmc0:aaaa SP32G 29.7 GiB
[ 4.156402] mmcblk0: p1 p2
[ 6.968872] cpsw-switch 48484000.switch eth0: Link is Up - 1Gbps/Full - flow control off
[ 7.015441] Sending DHCP requests ., OK
[ 7.059326] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.39
[ 7.067047] IP-Config: Complete:
[ 7.070281] device=eth0, hwaddr=04:a3:16:dd:13:74, ipaddr=192.168.0.39, mask=255.255.255.0, gw=192.168.0.1
[ 7.080444] host=192.168.0.39, domain=ti.com, nis-domain=(none)
[ 7.086853] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
[ 7.086853] nameserver0=192.0.2.2, nameserver1=192.0.2.3
[ 7.099884] clk: Disabling unused clocks
[ 7.104156] PM: genpd: Disabling unused power domains
[ 7.130187] VFS: Mounted root (nfs filesystem) on device 0:17.
[ 7.136566] devtmpfs: mounted
[ 7.140167] Freeing unused kernel image (initmem) memory: 1024K
[ 7.146331] Run /sbin/init as init process
[ 7.464782] systemd[1]: System time before build time, advancing clock.
[ 7.506225] systemd[1]: Inserted module 'autofs4'
[ 7.543182] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 7.566894] systemd[1]: Detected architecture arm.
Welcome to [1mDebian GNU/Linux 11 (bullseye)[0m!
[ 7.606628] systemd[1]: Set hostname to .
[ 8.521453] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.534759] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.541625] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 8.554107] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 8.587219] systemd[1]: Created slice system-getty.slice.
[[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0m.
[ 8.630493] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.638244] systemd[1]: Created slice system-modprobe.slice.
[[0;32m OK [0m] Created slice [0;1;39msystem-modprobe.slice[0m.
[ 8.680450] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.688171] systemd[1]: Created slice system-serial\x2dgetty.slice.
[[0;32m OK [0m] Created slice [0;1;39msystem-serial\x2dgetty.slice[0m.
[ 8.731323] systemd[1]: Created slice User and Session Slice.
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m.
[ 8.770751] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m.
[ 8.810699] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m.
[ 8.851104] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[[0;32m OK [0m] Set up automount [0;1;39mArbitrarys File System Automount Point[0m.
[ 8.900634] systemd[1]: Reached target Local Encrypted Volumes.
[[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m.
[ 8.940704] systemd[1]: Reached target Paths.
[[0;32m OK [0m] Reached target [0;1;39mPaths[0m.
[ 8.980590] systemd[1]: Reached target Remote File Systems.
[[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m.
[ 9.020507] systemd[1]: Reached target Slices.
[[0;32m OK [0m] Reached target [0;1;39mSlices[0m.
[ 9.060577] systemd[1]: Reached target Swap.
[[0;32m OK [0m] Reached target [0;1;39mSwap[0m.
[ 9.100891] systemd[1]: Listening on initctl Compatibility Named Pipe.
[[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m.
[ 9.141662] systemd[1]: Listening on Journal Audit Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m.
[ 9.181488] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[ 9.221069] systemd[1]: Listening on Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[ 9.261444] systemd[1]: Listening on Network Service Netlink Socket.
[[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m.
[ 9.303314] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[ 9.340911] systemd[1]: Listening on udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
[ 9.375946] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 9.416839] systemd[1]: Mounting POSIX Message Queue File System...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
[ 9.495849] systemd[1]: Mounting Kernel Debug File System...
Mounting [0;1;39mKernel Debug File System[0m...
[ 9.541015] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.575744] systemd[1]: Mounting Kernel Trace File System...
Mounting [0;1;39mKernel Trace File System[0m...
[ 9.593872] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.622924] systemd[1]: Starting Create list of static device nodes for the current kernel...
Starting [0;1;39mCreate list of stodes for the current kernel[0m...
[ 9.670867] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.706970] systemd[1]: Starting Load Kernel Module configfs...
Starting [0;1;39mLoad Kernel Module configfs[0m...
[ 9.739685] systemd[1]: Starting Load Kernel Module drm...
Starting [0;1;39mLoad Kernel Module drm[0m...
[ 9.802246] systemd[1]: Starting Load Kernel Module fuse...
Starting [0;1;39mLoad Kernel Module fuse[0m...
[ 9.851898] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 9.897369] systemd[1]: Starting Journal Service...
Starting [0;1;39mJournal Service[0m...
[ 9.937530] systemd[1]: Starting Load Kernel Modules...
Starting [0;1;39mLoad Kernel Modules[0m...
[ 10.018615] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
[ 10.126129] systemd[1]: Starting Coldplug All udev Devices...
Starting [0;1;39mColdplug All udev Devices[0m...
[ 10.151458] systemd[1]: Mounted POSIX Message Queue File System.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[ 10.207183] systemd[1]: Mounted Kernel Debug File System.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[ 10.246337] systemd[1]: Mounted Kernel Trace File System.
[[0;32m OK [0m] Mounted [0;1;39mKernel Trace File System[0m.
[ 10.277160] systemd[1]: Finished Create list of static device nodes for the current kernel.
[[0;32m OK [0m] Finished [0;1;39mCreate list of st nodes for the current kernel[0m.
[ 10.337249] systemd[1]: modprobe@configfs.service: Succeeded.
[ 10.365600] systemd[1]: Finished Load Kernel Module configfs.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[ 10.387359] systemd[1]: modprobe@drm.service: Succeeded.
[ 10.405700] systemd[1]: Finished Load Kernel Module drm.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m.
[ 10.427062] systemd[1]: modprobe@fuse.service: Succeeded.
[ 10.445953] systemd[1]: Finished Load Kernel Module fuse.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[ 10.468872] systemd[1]: Started Journal Service.
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m.
[[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.
[ 10.565307] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.577178] random: systemd-journal: uninitialized urandom read (16 bytes read)
Mounting [0;1;39mKernel Configuration File System[0m...
[ 10.614074] random: systemd-journal: uninitialized urandom read (16 bytes read)
Starting [0;1;39mFlush Journal to Persistent Storage[0m...
Starting [0;1;39mLoad/Save Random Seed[0m...
Starting [0;1;39mApply Kernel Variables[0m...
Starting [0;1;39mCreate System Users[0m...
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m.
[ 10.906890] systemd-journald[120]: Received client request to flush runtime journal.
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
[ 10.961059] systemd-journald[120]: File /var/log/journal/c2d1e75df5a44f379b0ba44115d3cbbb/system.journal corrupted or uncleanly shut down, renaming and replacing.
[[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m.
Starting [0;1;39mCreate Static Device Nodes in /dev[0m...
[ 11.495483] random: crng init done
[ 11.498931] random: 45 urandom warning(s) missed due to ratelimiting
[[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m.
[[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m.
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems (Pre)[0m.
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m.
Starting [0;1;39mRule-based Managefor Device Events and Files[0m...
[[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m.
Starting [0;1;39mCreate Volatile Files and Directories[0m...
[[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m.
Starting [0;1;39mNetwork Service[0m...
[ 13.399383] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[ 13.482086] omap-sham 4b101000.sham: will run requests pump with realtime priority
[ 13.490295] omap-sham 42701000.sham: hw accel on OMAP rev 4.3
[ 13.658935] omap-sham 42701000.sham: will run requests pump with realtime priority
[ 14.102600] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[ 14.124420] omap_rng 48090000.rng: Random Number Generator ver. 20
[[0;32m OK [0m] Found device [0;1;39m/dev/ttyS0[0m.
[ 14.187866] omap-des 480a5000.des: will run requests pump with realtime priority
[[0;32m OK [0m] Started [0;1;39mNetwork Service[0m.
[ 14.408721] Driver for 1-wire Dallas network protocol.
[ 14.504699] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode
[[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m.
[ 14.837310] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d
[ 14.969665] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[ 14.976165] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[ 14.983642] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000
[ 14.991851] remoteproc remoteproc0: 58820000.ipu is available
[ 14.998229] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000
[ 15.006378] remoteproc remoteproc1: 55020000.ipu is available
[ 15.012603] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000
[ 15.020782] remoteproc remoteproc2: 40800000.dsp is available
[ 15.035156] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2
[ 15.044342] remoteproc remoteproc0: powering up 58820000.ipu
[ 15.050079] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2
[ 15.059204] remoteproc remoteproc0: request_firmware failed: -2
[ 15.065216] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2
[ 15.074340] remoteproc remoteproc1: powering up 55020000.ipu
[ 15.080108] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2
[ 15.089263] remoteproc remoteproc1: request_firmware failed: -2
[ 15.096771] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2
[ 15.105926] remoteproc remoteproc2: powering up 40800000.dsp
[ 15.111663] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2
[ 15.120788] remoteproc remoteproc2: request_firmware failed: -2
Starting [0;1;39mNetwork Name Resolution[0m...
Starting [0;1;39mNetwork Time Synchronization[0m...
Starting [0;1;39mUpdate UTMP about System Boot/Shutdown[0m...
[ 15.740814] thermal thermal_zone5: Temperature check failed (-19)
[ 16.649719] CAN device driver interface
[ 16.667938] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[ 16.749145] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=9fef9477, irq=155)
[ 16.782043] omap-aes 4b500000.aes: will run requests pump with realtime priority
[ 16.789916] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[ 16.835693] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 16.974090] omap-aes 4b700000.aes: will run requests pump with realtime priority
[ 17.227844] DSS: OMAP DSS rev 6.1
[[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronizatio[ 17.377471] omapdss_hdmi5 58040000.encoder: supply vdda not found, using dummy regulator
n[0m.
[ 17.471313] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops [omapdrm])
[ 17.480438] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops [omapdrm])
[ 17.579803] dmm 4e000000.dmm: workaround for errata i878 in use
[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m.
[ 17.666290] dmm 4e000000.dmm: initialized all PAT entries
[ 17.776214] [drm] Initialized omapdrm 1.0.0 for omapdrm.0 on minor 0
[[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Boot/Shutdown[0m.
[ 18.218353] 10 fixed-partitions partitions found on MTD device spi0.0
[ 18.224853] Creating 10 MTD partitions on "spi0.0":
[ 18.229858] 0x000000000000-0x000000010000 : "QSPI.SPL"
[ 18.298156] 0x000000010000-0x000000020000 : "QSPI.SPL.backup1"
[ 18.329040] 0x000000020000-0x000000030000 : "QSPI.SPL.backup2"
[ 18.336822] [drm] Enabling DMM ywrap scrolling
[ 18.367492] Console: switching to colour frame buffer device 256x72
[ 18.368530] 0x000000030000-0x000000040000 : "QSPI.SPL.backup3"
[ 18.404266] 0x000000040000-0x000000140000 : "QSPI.u-boot"
[ 18.418579] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"
[ 18.436706] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"
[ 18.441650] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"
[ 18.446258] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"
[ 18.450256] 0x0000009e0000-0x000002000000 : "QSPI.file-system"
[ 18.651672] omapdrm omapdrm.0: [drm] fb0: omapdrmdrmfb frame buffer device
[ 18.681884] usbcore: registered new interface driver usbfs
[ 18.687530] usbcore: registered new interface driver hub
[ 18.692932] usbcore: registered new device driver usb
[ 19.182525] dwc3 48890000.usb: changing max_speed on rev 5533202a
[ 19.469726] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 19.475280] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 1
[ 19.511322] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000808002000010
[ 19.520904] xhci-hcd xhci-hcd.5.auto: irq 160, io mem 0x488d0000
[ 19.527221] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 19.532775] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 2
[ 19.540496] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[ 19.586120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 19.594451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.601776] usb usb1: Product: xHCI Host Controller
[ 19.606719] usb usb1: Manufacturer: Linux 6.11.0-rc6 xhci-hcd
[ 19.612487] usb usb1: SerialNumber: xhci-hcd.5.auto
[ 19.646942] hub 1-0:1.0: USB hub found
[ 19.655883] hub 1-0:1.0: 1 port detected
[ 19.672363] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 19.690917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 19.699340] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.706634] usb usb2: Product: xHCI Host Controller
[ 19.711547] usb usb2: Manufacturer: Linux 6.11.0-rc6 xhci-hcd
[ 19.717376] usb usb2: SerialNumber: xhci-hcd.5.auto
[ 19.737274] hub 2-0:1.0: USB hub found
[ 19.746917] hub 2-0:1.0: 1 port detected
[[0;32m OK [0m] Reached target [0;1;39mNetwork[0m.
[[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m.
[[0;32m OK [0m] Reached target [0;1;39mSound Card[0m.
[ 20.175445] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m.
[[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Synchronized[0m.
[[0;32m OK [0m] Started [0;1;39mDaily apt download activities[0m.
[[0;32m OK [0m] Started [0;1;39mDaily apt upgrade and clean activities[0m.
[ 20.356262] usb 1-1: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00
[ 20.364501] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 20.371734] usb 1-1: Product: Cruzer Blade
[ 20.375854] usb 1-1: Manufacturer: SanDisk
[ 20.379974] usb 1-1: SerialNumber: 4C530001100510119265
[[0;32m OK [0m] Started [0;1;39mPeriodic ext4 Onliata Check for All Filesystems[0m.
[ 20.429687] usb-storage 1-1:1.0: USB Mass Storage device detected
[[0;32m OK [0m] Started [0;1;39mDiscard unused blocks once [ 20.439880] scsi host0: usb-storage 1-1:1.0
a week[0m.
[[0;32m OK [0m] Reached target [0;1;39mTimers[0m.[ 20.450378] usbcore: registered new interface driver usb-storage
[[0;32m OK [0m] Reached target [0;1;39mHardware activated USB gadget[0m.
[[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m.
[[0;32m OK [0m] Reached target [0;1;39mSockets[0m.
[[0;32m OK [0m] Reached target [0;1;39mBasic System[0m.
[[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m.
Starting [0;1;39mRemove Stale Onlit4 Metadata Check Snapshots[0m...
Starting [0;1;39mUser Login Management[0m...
Starting [0;1;39mPermit User Sessions[0m...
[[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m.
[[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m.
[[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS0[0m.
[[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m.
[[0;32m OK [0m] Started [0;1;39mUser Login Management[0m.
[[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m.
[[0;32m OK [0m] Finished [0;1;39mRemove Stale Onliext4 Metadata Check Snapshots[0m.
[[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m.
Starting [0;1;39mUpdate UTMP about System Runlevel Changes[0m...
[[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Runlevel Changes[0m.
Debian Gseye-armhf login: root (automatic login)
[ 21.526641] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
Linux debian-bullseye-armhf 6.11.0-rc6 #1 SMP Thu Sep 5 01:47:56 UTC 2024 armv7l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/sha[ 21.558074] sd 0:0:0:0: [sda] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
re/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
[ 21.580566] sd 0:0:0:0: [sda] Write Protect is off
Last login: Fri Sep 6 09:39:52 UTC 2024 on ttyS0
[ 21.586669] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 21.627532] sda: sda1
[ 21.630218] sd 0:0:0:0: [sda] Attached SCSI removable disk
/ #
- 04:51:23 [INFO] Sleeping 15 secs to allow systemd to finish starting processes...
- 04:51:38 [INFO] Disconnected serial from dra71x-evm
- 04:51:38 [INFO] Connected to dra71x-evm via serial
- 04:51:38 [INFO] Host: uname -a
- 04:51:38 [INFO] Target:
uname -a
Linux debian-bullseye-armhf 6.11.0-rc6 #1 SMP Thu Sep 5 01:47:56 UTC 2024 armv7l GNU/Linux
/ #
- 04:51:38 [INFO] Host: cat /proc/cmdline
- 04:51:38 [INFO] Target:
cat /proc/cmdline
console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/dra71x-evm2/autofs/29d150f62ef8c1505ae043eeb678acc5,nolock,v3,tcp,rsize=4096,wsize=4096 0
/ #
- 04:51:38 [INFO] Host: uname -a
- 04:51:38 [INFO] Target:
uname -a
Linux debian-bullseye-armhf 6.11.0-rc6 #1 SMP Thu Sep 5 01:47:56 UTC 2024 armv7l GNU/Linux
/ #
- 04:51:38 [INFO] Host: cat /proc/mtd
- 04:51:38 [INFO] Target:
cat /proc/mtd
dev: size erasesize name
mtd0: 00010000 00010000 "QSPI.SPL"
mtd1: 00010000 00010000 "QSPI.SPL.backup1"
mtd2: 00010000 00010000 "QSPI.SPL.backup2"
mtd3: 00010000 00010000 "QSPI.SPL.backup3"
mtd4: 00100000 00010000 "QSPI.u-boot"
mtd5: 00080000 00010000 "QSPI.u-boot-spl-os"
mtd6: 00010000 00010000 "QSPI.u-boot-env"
mtd7: 00010000 00010000 "QSPI.u-boot-env.backup1"
mtd8: 00800000 00010000 "QSPI.kernel"
mtd9: 01620000 00010000 "QSPI.file-system"
/ #
- 04:51:38 [INFO] Host: grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/pnp /etc/resolv.conf && systemctl restart systemd-resolved
- 04:51:39 [INFO] Target:
grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/pnp /etc/resolv.conf && systemctl restart systemd-resolved
/ #
- 04:51:39 [INFO] Host: ls -l /lib/firmware; ls -lR /lib/firmware/ipc
- 04:51:39 [INFO] Target:
ls -l /lib/firmware; ls -lR /lib/firmware/ipc
ls: cannot access '/lib/firmware': No such file or directory
ls: cannot access '/lib/firmware/ipc': No such file or directory
/ #
- 04:51:39 [INFO] Host: cat /proc/diskstats
- 04:51:40 [INFO] Target:
cat /proc/diskstats
1 0 ram0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 1 ram1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 2 ram2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 3 ram3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 4 ram4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 5 ram5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 6 ram6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 7 ram7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 8 ram8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 9 ram9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 10 ram10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 11 ram11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 12 ram12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 13 ram13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 14 ram14 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1 15 ram15 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
179 0 mmcblk2 126 0 7458 1667 0 0 0 0 0 0 1667 0 0 0 0 0 0
179 1 mmcblk2p1 30 0 2089 449 0 0 0 0 0 0 449 0 0 0 0 0 0
179 2 mmcblk2p2 31 0 2097 485 0 0 0 0 0 0 485 0 0 0 0 0 0
179 3 mmcblk2p3 28 0 2080 485 0 0 0 0 0 0 485 0 0 0 0 0 0
179 8 mmcblk2boot0 30 0 240 789 0 0 0 0 0 0 789 0 0 0 0 0 0
179 16 mmcblk2boot1 30 0 240 727 0 0 0 0 0 0 727 0 0 0 0 0 0
179 24 mmcblk0 107 0 6280 1141 0 0 0 0 0 0 1141 0 0 0 0 0 0
179 25 mmcblk0p1 29 0 2080 306 0 0 0 0 0 0 306 0 0 0 0 0 0
179 26 mmcblk0p2 28 0 2096 194 0 0 0 0 0 0 194 0 0 0 0 0 0
31 0 mtdblock0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 1 mtdblock1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 2 mtdblock2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 3 mtdblock3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 4 mtdblock4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 5 mtdblock5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 6 mtdblock6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 7 mtdblock7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 8 mtdblock8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 9 mtdblock9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
8 0 sda 74 0 2800 136 0 0 0 0 0 0 136 0 0 0 0 0 0
8 1 sda1 38 0 2120 86 0 0 0 0 0 0 86 0 0 0 0 0 0
/ #
- 04:51:40 [INFO] Host: cat /proc/interrupts
- 04:51:40 [INFO] Target:
cat /proc/interrupts
CPU0
25: 16 CBAR 32 Level clockevent
26: 3234 CBAR 341 Level percpu-dmtimer
92: 0 WUGEN 131 Level arm-pmu
93: 0 CBAR 4 Level l3-dbg-irq
94: 0 WUGEN 10 Level l3-app-irq
95: 1 CBAR 8 Level omap-dma-engine
96: 0 CBAR 24 Level 4ae10000.gpio
102: 12 CBAR 30 Level 48051000.gpio
103: 0 CBAR 116 Level 48053000.gpio
104: 0 CBAR 25 Level 48055000.gpio
105: 0 CBAR 26 Level 48057000.gpio
106: 0 CBAR 27 Level 48059000.gpio
107: 0 CBAR 28 Level 4805b000.gpio
108: 0 CBAR 29 Level 4805d000.gpio
109: 409 CBAR 67 Level 4806a000.serial
110: 0 pinctrl 992 Edge 4806a000.serial:wakeup
111: 177 CBAR 51 Level 48070000.i2c
112: 11 48051000.gpio 31 Edge 0-0020, 0-0021
113: 0 CBAR 1 Level 48078000.elm
114: 18 CBAR 55 Level 4807c000.i2c
117: 24877 CBAR 335 Level 48484000.switch
118: 33397 CBAR 336 Level 48484000.switch
119: 10 CBAR 337 Level 48484000.switch
128: 1 CBAR 121 Level talert
129: 0 CBAR 361 Level 43300000.dma_ccint
130: 0 CBAR 359 Level 43300000.dma_ccerrint
131: 0 CBAR 23 Level 40d01000.mmu
132: 0 CBAR 145 Level 40d02000.mmu
133: 0 CBAR 395 Level 58882000.mmu
134: 0 CBAR 396 Level 55082000.mmu
135: 794 CBAR 78 Level mmc0
136: 52 CBAR 91 Level mmc1
137: 0 4805d000.gpio 27 Edge 4809c000.mmc cd
138: 1216 CBAR 81 Level mmc2
139: 0 pcf857x 1 Edge extcon_usb1
140: 0 pcf857x 14 Edge extcon_usb1
141: 0 pcf857x 2 Edge extcon_usb2
142: 3 pcf857x 15 Edge extcon_usb2
143: 1 48051000.gpio 12 Edge tpd12s015 hpd
144: 0 CBAR 46 Level 4b101000.sham
145: 0 CBAR 163 Level 42701000.sham
146: 0 CBAR 47 Level 48090000.rng
147: 0 CBAR 53 Level omap_hdq
148: 0 CBAR 150 Level 48468000.mcasp_rx
149: 0 CBAR 151 Level 48468000.mcasp_tx
152: 2 CBAR 72 Level dwc3-omap
153: 4 CBAR 87 Level dwc3-omap
156: 1 CBAR 96 Level OMAP HDMI
157: 479 CBAR 20 Level OMAP DISPC
158: 3 CBAR 108 Level omap_dmm_irq_handler
160: 482 CBAR 73 Level xhci-hcd:usb1
IPI0: 0 CPU wakeup interrupts
IPI1: 0 Timer broadcast interrupts
IPI2: 0 Rescheduling interrupts
IPI3: 0 Function call interrupts
IPI4: 0 CPU stop interrupts
IPI5: 0 IRQ work interrupts
IPI6: 0 completion interrupts
Err: 0
/ #
- 04:51:40 [INFO] Host: cat /proc/softirqs
- 04:51:40 [INFO] Target:
cat /proc/softirqs
CPU0
HI: 11
TIMER: 1736
NET_TX: 3
NET_RX: 43084
BLOCK: 0
IRQ_POLL: 0
TASKLET: 1276
SCHED: 0
HRTIMER: 0
RCU: 5631
/ #
- 04:51:40 [INFO] Host: ls -lR /run/media/mmcblk0p1
- 04:51:40 [INFO] Target:
ls -lR /run/media/mmcblk0p1
ls: cannot access '/run/media/mmcblk0p1': No such file or directory
/ #
- 04:51:40 [INFO] Host: lsmod
- 04:51:41 [INFO] Target:
lsmod
Module Size Used by
usb_storage 53248 0
xhci_plat_hcd 12288 0
xhci_hcd 188416 1 xhci_plat_hcd
snd_soc_omap_hdmi 12288 0
dwc3 155648 0
roles 12288 1 dwc3
udc_core 45056 1 dwc3
usbcore 208896 4 usb_storage,xhci_plat_hcd,dwc3,xhci_hcd
usb_common 12288 5 udc_core,xhci_plat_hcd,usbcore,dwc3,xhci_hcd
spi_nor 77824 0
omapdrm 229376 2
snd_soc_simple_card 16384 0
snd_soc_simple_card_utils 20480 1 snd_soc_simple_card
cec 40960 1 omapdrm
omap_wdt 12288 0
c_can_platform 12288 0
watchdog 24576 1 omap_wdt
c_can 16384 1 c_can_platform
omap_aes_driver 24576 0
libaes 12288 1 omap_aes_driver
can_dev 24576 1 c_can
spi_ti_qspi 16384 0
phy_omap_usb2 12288 3
dwc3_omap 12288 0
bq27xxx_battery_hdq 12288 0
bq27xxx_battery 16384 1 bq27xxx_battery_hdq
omap_mailbox 12288 0
snd_soc_davinci_mcasp 24576 2
snd_soc_ti_udma 12288 1 snd_soc_davinci_mcasp
snd_soc_ti_edma 12288 1 snd_soc_davinci_mcasp
snd_soc_ti_sdma 12288 2 snd_soc_davinci_mcasp,snd_soc_omap_hdmi
omap_hdq 16384 0
snd_soc_tlv320aic3x_i2c 12288 1
snd_soc_tlv320aic3x 49152 1 snd_soc_tlv320aic3x_i2c
wire 28672 2 bq27xxx_battery_hdq,omap_hdq
cn 12288 1 wire
hwmon 24576 1 wire
snd_soc_core 184320 8 snd_soc_davinci_mcasp,snd_soc_omap_hdmi,snd_soc_simple_card_utils,snd_soc_ti_sdma,snd_soc_ti_edma,snd_soc_tlv320aic3x,snd_soc_ti_udma,snd_soc_simple_card
snd_pcm_dmaengine 12288 1 snd_soc_core
snd_pcm 114688 6 snd_soc_davinci_mcasp,snd_pcm_dmaengine,snd_soc_omap_hdmi,snd_soc_simple_card_utils,snd_soc_core,snd_soc_tlv320aic3x
snd_timer 32768 1 snd_pcm
omap_des 20480 0
omap_rng 12288 0
libdes 24576 1 omap_des
snd 65536 3 snd_timer,snd_soc_core,snd_pcm
rng_core 16384 1 omap_rng
soundcore 12288 1 snd
omap_crypto 12288 2 omap_des,omap_aes_driver
omap_sham 28672 0
crypto_engine 12288 3 omap_des,omap_aes_driver,omap_sham
omap_remoteproc 16384 0
display_connector 12288 0
drm_kms_helper 126976 2 display_connector,omapdrm
ti_tpd12s015 12288 0
extcon_usb_gpio 12288 0
drm 425984 5 ti_tpd12s015,display_connector,omapdrm,drm_kms_helper
drm_panel_orientation_quirks 12288 1 drm
ip_tables 20480 0
x_tables 24576 1 ip_tables
autofs4 32768 2
/ #
- 04:51:41 [INFO] Host: export IPERFHOST=192.168.0.1
- 04:51:41 [INFO] Target:
export IPERFHOST=192.168.0.1
/ #
- 04:51:41 [INFO] Host: export NFS_SERVER=192.168.0.1
- 04:51:41 [INFO] Target:
export NFS_SERVER=192.168.0.1
/ #
- 04:51:41 [INFO] Host: export NFS_ROOT_PATH=/opt/NFS_exports/linux/dra71x-evm2
- 04:51:41 [INFO] Target:
export NFS_ROOT_PATH=/opt/NFS_exports/linux/dra71x-evm2
/ #
- 04:51:41 [INFO] Host: export AP_SSID=
- 04:51:42 [INFO] Target:
export AP_SSID=
/ #
- 04:51:42 [INFO] Host: mkdir -p -m 777 /test
- 04:51:42 [INFO] Target:
mkdir -p -m 777 /test
/ #
- 04:51:42 [INFO] Host: cd /test
- 04:51:42 [INFO] Target:
cd /test
/test #
- 04:51:42 [INFO] Host: cat > test.sh << EOF
- 04:51:42 [INFO] Target:
cat > test.sh << EOF
>
- 04:51:42 [INFO] Host: failtest() {
- 04:51:42 [INFO] Target:
failtest() {
>
- 04:51:42 [INFO] Host: echo 1 >&3
- 04:51:43 [INFO] Target:
echo 1 >&3
>
- 04:51:43 [INFO] Host: }
- 04:51:43 [INFO] Target:
}
>
- 04:51:43 [INFO] Host: timeout=20
- 04:51:43 [INFO] Target:
timeout=20
>
- 04:51:43 [INFO] Host:
- 04:51:43 [INFO] Target:
>
- 04:51:43 [INFO] Host: # Start of user's script logic
- 04:51:43 [INFO] Target:
# Start of user's script logic
>
- 04:51:43 [INFO] Host: dmesg
- 04:51:44 [INFO] Target:
dmesg
>
- 04:51:44 [INFO] Host: EOF
- 04:51:44 [INFO] Target:
EOF
/test #
- 04:51:44 [INFO] Host: cd /test
- 04:51:44 [INFO] Target:
cd /test
/test #
- 04:51:44 [INFO] Host: chmod +x test.sh
- 04:51:44 [INFO] Target:
chmod +x test.sh
/test #
- 04:51:44 [INFO] Host: ./test.sh 2>&1 3> result.log
- 04:51:49 [INFO] Target:
./test.sh 2>&1 3> result.log
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.11.0-rc6 (KernelCI@build-j308018-arm-gcc-12-omap2plus-defconfig-4qxw7) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Sep 5 01:47:56 UTC 2024
[ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: TI DRA718 EVM
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56 MiB
[ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x95800000..0x98ffffff (57344 KiB) map reusable ipu2-memory@95800000
[ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x99000000..0x9cffffff (65536 KiB) map reusable dsp1-memory@99000000
[ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB
[ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x9d000000..0x9effffff (32768 KiB) map reusable ipu1-memory@9d000000
[ 0.000000] cma: Reserved 16 MiB at 0xfe000000 on node -1
[ 0.000000] OMAP4: Map 0xafe00000 to (ptrval) for dram barrier
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x00000000afdfffff]
[ 0.000000] HighMem [mem 0x00000000afe00000-0x00000000feffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000afdfffff]
[ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000feffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000feffffff]
[ 0.000000] On node 0, zone HighMem: 512 pages in unavailable ranges
[ 0.000000] DRA722 ES2.0
[ 0.000000] percpu: Embedded 17 pages/cpu s39884 r8192 d21556 u69632
[ 0.000000] pcpu-alloc: s39884 r8192 d21556 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Kernel command line: console=ttyO0,115200n8 earlyprintk=serial,ttyO0,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/dra71x-evm2/autofs/29d150f62ef8c1505ae043eeb678acc5,nolock,v3,tcp,rsize=4096,wsize=4096 0
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] Unknown kernel command line parameters "0 earlyprintk=serial,ttyO0,115200n8", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 519680
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[ 0.000030] sched_clock: 32 bits at 33kHz, resolution 30517ns, wraps every 65535999984741ns
[ 0.001464] TI gptimer clockevent: always-on 32786 Hz at /ocp/interconnect@4ae00000/segment@10000/target-module@8000
[ 0.003112] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2c000
[ 0.003173] Failed to initialize '/ocp/interconnect@48800000/segment@0/target-module@2e000/timer@0': -22
[ 0.003936] Console: colour dummy device 80x30
[ 0.003967] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.003997] This ensures that you still see kernel messages. Please
[ 0.003997] update your kernel commandline.
[ 0.004028] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)
[ 0.062103] CPU: Testing write buffer coherency: ok
[ 0.062133] CPU0: Spectre v2: using ICIALLU workaround
[ 0.062133] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[ 0.062164] pid_max: default: 32768 minimum: 301
[ 0.062225] LSM: initializing lsm=capability
[ 0.062316] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.062347] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.063110] /cpus/cpu@0 missing clock-frequency property
[ 0.063140] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.063995] Setting up static identity map for 0x80100000 - 0x80100078
[ 0.064147] rcu: Hierarchical SRCU implementation.
[ 0.064147] rcu: Max phase no-delay instances is 1000.
[ 0.064697] smp: Bringing up secondary CPUs ...
[ 0.064727] smp: Brought up 1 node, 1 CPU
[ 0.064727] SMP: Total of 1 processors activated (1993.93 BogoMIPS).
[ 0.064727] CPU: All CPU(s) started in HYP mode.
[ 0.064758] CPU: Virtualization extensions available.
[ 0.064819] Memory: 1868004K/2078720K available (11264K kernel code, 1142K rwdata, 2696K rodata, 1024K init, 291K bss, 36844K reserved, 172032K cma-reserved, 1277952K highmem)
[ 0.065185] devtmpfs: initialized
[ 0.089233] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.089447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.089447] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.092193] pinctrl core: initialized pinctrl subsystem
[ 0.093597] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.095214] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.095794] audit: initializing netlink subsys (disabled)
[ 0.096435] thermal_sys: Registered thermal governor 'fair_share'
[ 0.096435] thermal_sys: Registered thermal governor 'step_wise'
[ 0.096466] thermal_sys: Registered thermal governor 'user_space'
[ 0.096496] audit: type=2000 audit(0.090:1): state=initialized audit_enabled=0 res=1
[ 0.096527] cpuidle: using governor menu
[ 0.129486] platform ocp: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm_core@0/clock@e00/clock@20
[ 0.129547] platform ocp: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm_core@0/clock@700/clock@20
[ 0.133972] platform connector: Fixed dependency cycle(s) with /encoder
[ 0.134063] platform encoder: Fixed dependency cycle(s) with /connector
[ 0.134155] platform encoder: Fixed dependency cycle(s) with /ocp/target-module@58000000/dss@0/target-module@40000/encoder@0
[ 0.135314] No ATAGs?
[ 0.135375] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.135375] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.139495] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.154998] iommu: Default domain type: Translated
[ 0.154998] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.156311] reg-fixed-voltage fixedregulator-evm12v0: using DT '/fixedregulator-evm12v0' for '(default)' GPIO lookup
[ 0.156341] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-evm12v0[0]'
[ 0.156341] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-evm12v0[0]'
[ 0.156372] reg-fixed-voltage fixedregulator-evm12v0: using lookup tables for GPIO lookup
[ 0.156372] reg-fixed-voltage fixedregulator-evm12v0: No GPIO consumer (default) found
[ 0.156646] reg-fixed-voltage fixedregulator-evm5v0: using DT '/fixedregulator-evm5v0' for '(default)' GPIO lookup
[ 0.156646] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-evm5v0[0]'
[ 0.156677] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-evm5v0[0]'
[ 0.156677] reg-fixed-voltage fixedregulator-evm5v0: using lookup tables for GPIO lookup
[ 0.156707] reg-fixed-voltage fixedregulator-evm5v0: No GPIO consumer (default) found
[ 0.156982] reg-fixed-voltage fixedregulator-evm_3v6: using DT '/fixedregulator-evm_3v6' for '(default)' GPIO lookup
[ 0.157012] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-evm_3v6[0]'
[ 0.157012] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-evm_3v6[0]'
[ 0.157043] reg-fixed-voltage fixedregulator-evm_3v6: using lookup tables for GPIO lookup
[ 0.157043] reg-fixed-voltage fixedregulator-evm_3v6: No GPIO consumer (default) found
[ 0.157318] reg-fixed-voltage fixedregulator-vsys3v3: using DT '/fixedregulator-vsys3v3' for '(default)' GPIO lookup
[ 0.157318] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-vsys3v3[0]'
[ 0.157348] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vsys3v3[0]'
[ 0.157348] reg-fixed-voltage fixedregulator-vsys3v3: using lookup tables for GPIO lookup
[ 0.157348] reg-fixed-voltage fixedregulator-vsys3v3: No GPIO consumer (default) found
[ 0.157623] reg-fixed-voltage fixedregulator-evm_3v3: using DT '/fixedregulator-evm_3v3' for '(default)' GPIO lookup
[ 0.157653] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-evm_3v3[0]'
[ 0.157653] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-evm_3v3[0]'
[ 0.157684] reg-fixed-voltage fixedregulator-evm_3v3: using lookup tables for GPIO lookup
[ 0.157684] reg-fixed-voltage fixedregulator-evm_3v3: No GPIO consumer (default) found
[ 0.157958] reg-fixed-voltage fixedregulator-aic_dvdd: using DT '/fixedregulator-aic_dvdd' for '(default)' GPIO lookup
[ 0.157989] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-aic_dvdd[0]'
[ 0.157989] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-aic_dvdd[0]'
[ 0.158020] reg-fixed-voltage fixedregulator-aic_dvdd: using lookup tables for GPIO lookup
[ 0.158020] reg-fixed-voltage fixedregulator-aic_dvdd: No GPIO consumer (default) found
[ 0.163177] SCSI subsystem initialized
[ 0.163330] libata version 3.00 loaded.
[ 0.163574] pps_core: LinuxPPS API ver. 1 registered
[ 0.163574] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.163604] PTP clock support registered
[ 0.175262] vgaarb: loaded
[ 0.175384] clocksource: Switched to clocksource 32k_counter
[ 0.175689] VFS: Disk quotas dquot_6.6.0
[ 0.175720] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.195831] NET: Registered PF_INET protocol family
[ 0.196014] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.197387] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.197418] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.197448] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.197509] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.197723] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.197814] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.197845] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.197967] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.198516] RPC: Registered named UNIX socket transport module.
[ 0.198516] RPC: Registered udp transport module.
[ 0.198516] RPC: Registered tcp transport module.
[ 0.198516] RPC: Registered tcp-with-tls transport module.
[ 0.198547] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.198547] PCI: CLS 0 bytes, default 64
[ 0.199401] Initialise system trusted keyrings
[ 0.205749] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.206329] NFS: Registering the id_resolver key type
[ 0.206390] Key type id_resolver registered
[ 0.206390] Key type id_legacy registered
[ 0.206420] jffs2: version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
[ 0.206634] Key type asymmetric registered
[ 0.206665] Asymmetric key parser 'x509' registered
[ 0.206726] bounce: pool size: 64 pages
[ 0.206756] io scheduler mq-deadline registered
[ 0.206756] io scheduler kyber registered
[ 0.206787] io scheduler bfq registered
[ 0.215515] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[ 0.239654] brd: module loaded
[ 0.250427] loop: module loaded
[ 0.251129] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.258331] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 0.258331] mdio_bus fixed-0: No GPIO consumer reset found
[ 0.259521] i2c_dev: i2c /dev entries driver
[ 0.260314] cpu cpu0: error -ENODEV: _opp_set_regulators: no regulator (vdd) found
[ 0.260375] cpu cpu0: error -ENODEV: Failed to set OPP config
[ 0.260650] sdhci: Secure Digital Host Controller Interface driver
[ 0.260650] sdhci: Copyright(c) Pierre Ossman
[ 0.260833] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.261047] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.274139] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.274475] Initializing XFRM netlink socket
[ 0.274505] NET: Registered PF_INET6 protocol family
[ 0.275390] Segment Routing with IPv6
[ 0.275482] In-situ OAM (IOAM) with IPv6
[ 0.275573] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.276062] NET: Registered PF_PACKET protocol family
[ 0.276092] NET: Registered PF_KEY protocol family
[ 0.276153] Key type dns_resolver registered
[ 0.276275] ThumbEE CPU extension supported.
[ 0.276275] Registering SWP/SWPB emulation handler
[ 0.276733] omap_voltage_late_init: Voltage driver support not added
[ 0.276733] sr_init_by_name: Unable to get voltage domain pointer for VDD mpu
[ 0.276763] sr_init_by_name: Unable to get voltage domain pointer for VDD core
[ 0.276763] Power Management for TI OMAP4+ devices.
[ 0.277008] SmartReflex Class3 initialized
[ 0.297485] Loading compiled-in X.509 certificates
[ 0.365234] platform 4a000000.interconnect: Fixed dependency cycle(s) with /ocp/interconnect@4a000000/segment@0/target-module@8000/cm_core@0/clock@d00/clock@20
[ 0.370208] pinctrl-single 4a003400.pinmux: 282 pins, size 1128
[ 0.388061] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[ 0.402038] gpiochip_find_base_unlocked: found new base at 512
[ 0.431243] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0)
[ 0.431335] gpio gpiochip0: registered GPIOs 512 to 543 on gpio-0-31
[ 0.431396] OMAP GPIO hardware version 0.1
[ 0.444793] ti-sysc 4ae18000.target-module: probe with driver ti-sysc failed with error -16
[ 0.457702] gpiochip_find_base_unlocked: found new base at 544
[ 0.477447] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1)
[ 0.477539] gpio gpiochip1: registered GPIOs 544 to 575 on gpio-32-63
[ 0.478759] gpiochip_find_base_unlocked: found new base at 576
[ 0.479278] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2)
[ 0.479339] gpio gpiochip2: registered GPIOs 576 to 607 on gpio-64-95
[ 0.480499] gpiochip_find_base_unlocked: found new base at 608
[ 0.480743] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3)
[ 0.480804] gpio gpiochip3: registered GPIOs 608 to 639 on gpio-96-127
[ 0.481933] gpiochip_find_base_unlocked: found new base at 640
[ 0.488586] gpio gpiochip4: (gpio-128-159): added GPIO chardev (254:4)
[ 0.488647] gpio gpiochip4: registered GPIOs 640 to 671 on gpio-128-159
[ 0.489776] gpiochip_find_base_unlocked: found new base at 672
[ 0.489990] gpio gpiochip5: (gpio-160-191): added GPIO chardev (254:5)
[ 0.490051] gpio gpiochip5: registered GPIOs 672 to 703 on gpio-160-191
[ 0.491363] gpiochip_find_base_unlocked: found new base at 704
[ 0.497955] gpio gpiochip6: (gpio-192-223): added GPIO chardev (254:6)
[ 0.498046] gpio gpiochip6: registered GPIOs 704 to 735 on gpio-192-223
[ 0.499267] gpiochip_find_base_unlocked: found new base at 736
[ 0.505889] gpio gpiochip7: (gpio-224-255): added GPIO chardev (254:7)
[ 0.505950] gpio gpiochip7: registered GPIOs 736 to 767 on gpio-224-255
[ 0.509643] omap8250 4806a000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0' for 'rs485-term' GPIO lookup
[ 0.509704] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
[ 0.509735] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
[ 0.509765] omap8250 4806a000.serial: using lookup tables for GPIO lookup
[ 0.509765] omap8250 4806a000.serial: No GPIO consumer rs485-term found
[ 0.509765] omap8250 4806a000.serial: using DT '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0' for 'rs485-rx-during-tx' GPIO lookup
[ 0.509796] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
[ 0.509826] of_get_named_gpiod_flags: can't parse 'rs485-rx-during-tx-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@6a000/serial@0[0]'
[ 0.509857] omap8250 4806a000.serial: using lookup tables for GPIO lookup
[ 0.509887] omap8250 4806a000.serial: No GPIO consumer rs485-rx-during-tx found
[ 0.510070] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 109, base_baud = 3000000) is a 8250
[ 0.510131] printk: legacy console [ttyS0] enabled
[ 1.858489] i2c i2c-0: using DT '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0' for 'scl' GPIO lookup
[ 1.858520] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
[ 1.858581] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
[ 1.858612] i2c i2c-0: using lookup tables for GPIO lookup
[ 1.858612] i2c i2c-0: No GPIO consumer scl found
[ 1.858642] i2c i2c-0: using DT '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0' for 'sda' GPIO lookup
[ 1.858673] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
[ 1.858703] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0[0]'
[ 1.858734] i2c i2c-0: using lookup tables for GPIO lookup
[ 1.858734] i2c i2c-0: No GPIO consumer sda found
[ 1.895660] gpiochip_find_base_unlocked: found new base at 768
[ 1.895904] gpio gpiochip8: (pcf8575): added GPIO chardev (254:8)
[ 1.895965] gpio gpiochip8: registered GPIOs 768 to 783 on pcf8575
[ 1.895996] pcf857x 0-0020: probed
[ 1.905853] gpiochip_find_base_unlocked: found new base at 784
[ 1.906066] gpio gpiochip9: (pcf8575): added GPIO chardev (254:9)
[ 1.906127] gpio gpiochip9: registered GPIOs 784 to 799 on pcf8575
[ 1.906158] pcf857x 0-0021: probed
[ 1.918548] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.946990] lp8733-ldo0: Bringing 2500000uV into 3300000-3300000uV
[ 1.953857] i2c i2c-4: using DT '/ocp/interconnect@48000000/segment@0/target-module@7c000/i2c@0' for 'scl' GPIO lookup
[ 1.953887] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@7c000/i2c@0[0]'
[ 1.953918] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@7c000/i2c@0[0]'
[ 1.953948] i2c i2c-4: using lookup tables for GPIO lookup
[ 1.953979] i2c i2c-4: No GPIO consumer scl found
[ 1.953979] i2c i2c-4: using DT '/ocp/interconnect@48000000/segment@0/target-module@7c000/i2c@0' for 'sda' GPIO lookup
[ 1.954010] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@7c000/i2c@0[0]'
[ 1.954040] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@7c000/i2c@0[0]'
[ 1.954071] i2c i2c-4: using lookup tables for GPIO lookup
[ 1.954101] i2c i2c-4: No GPIO consumer sda found
[ 1.975708] gpiochip_find_base_unlocked: found new base at 800
[ 1.975769] gpio gpiochip10: Persistence not supported for GPIO 1
[ 1.975891] gpio-801 (vin6_sel_s0): hogged as output/low
[ 1.975921] gpio gpiochip10: Persistence not supported for GPIO 0
[ 1.976043] gpio-800 (pm_oe_n): hogged as output/high
[ 1.978149] gpio gpiochip10: (pcf8575): added GPIO chardev (254:10)
[ 1.978240] gpio gpiochip10: registered GPIOs 800 to 815 on pcf8575
[ 1.978271] pcf857x 4-0026: probed
[ 1.981842] i2c 4-003c: Fixed dependency cycle(s) with /ocp/interconnect@48400000/target-module@5b000/cal@0
[ 1.991760] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz
[ 2.011535] ocp:target-module@48210000:mpu:fck: device ID is greater than 24
[ 2.031158] cpsw-switch 48484000.switch: using DT '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0' for 'mode' GPIO lookup
[ 2.031219] of_get_named_gpiod_flags: parsed 'mode-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0[0]' - status (0)
[ 2.031249] gpio gpiochip9: Persistence not supported for GPIO 4
[ 2.031616] cpsw-switch 48484000.switch: using DT '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0' for 'mode' GPIO lookup
[ 2.031677] of_get_named_gpiod_flags: parsed 'mode-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0[1]' - status (0)
[ 2.031707] gpio gpiochip10: Persistence not supported for GPIO 9
[ 2.035675] cpsw-switch 48484000.switch: using DT '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0' for 'mode' GPIO lookup
[ 2.035736] of_get_named_gpiod_flags: parsed 'mode-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0[2]' - status (0)
[ 2.035766] gpio gpiochip10: Persistence not supported for GPIO 10
[ 2.037048] mdio_bus 48485000.mdio: using DT '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000' for 'reset' GPIO lookup
[ 2.037109] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000[0]'
[ 2.037139] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000[0]'
[ 2.037170] mdio_bus 48485000.mdio: using lookup tables for GPIO lookup
[ 2.037200] mdio_bus 48485000.mdio: No GPIO consumer reset found
[ 2.095458] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ 2.103881] mdio_bus 48485000.mdio:02: using DT '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@2' for 'reset' GPIO lookup
[ 2.103942] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@2[0]'
[ 2.103973] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@2[0]'
[ 2.104034] mdio_bus 48485000.mdio:02: using lookup tables for GPIO lookup
[ 2.104034] mdio_bus 48485000.mdio:02: No GPIO consumer reset found
[ 2.107421] mdio_bus 48485000.mdio:03: using DT '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@3' for 'reset' GPIO lookup
[ 2.107482] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@3[0]'
[ 2.107513] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@48400000/segment@0/target-module@84000/switch@0/mdio@1000/ethernet-phy@3[0]'
[ 2.107543] mdio_bus 48485000.mdio:03: using lookup tables for GPIO lookup
[ 2.107574] mdio_bus 48485000.mdio:03: No GPIO consumer reset found
[ 2.110382] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver TI DP83867
[ 2.118743] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver TI DP83867
[ 2.127685] cpsw-switch 48484000.switch: initialized cpsw ale version 1.4
[ 2.134521] cpsw-switch 48484000.switch: ALE Table size 1024
[ 2.140319] cpsw-switch 48484000.switch: cpts: overflow check period 500 (jiffies)
[ 2.147979] cpsw-switch 48484000.switch: CPTS: ref_clk_freq:266000000 calc_mult:4036623398 calc_shift:30 error:-1 nsec/sec
[ 2.159118] cpsw-switch 48484000.switch: Detected MACID = 04:a3:16:dd:13:74
[ 2.166168] cpsw-switch 48484000.switch: Detected MACID = 04:a3:16:dd:13:75
[ 2.175109] cpsw-switch 48484000.switch: initialized (regs 0x48484000, pool size 256) hw_ver:0019010F 1.15 (0)
[ 2.186798] i2c 4-003c: Fixed dependency cycle(s) with /ocp/interconnect@48400000/target-module@5b000/cal@0
[ 2.196685] platform 4845b000.cal: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@0/target-module@7c000/i2c@0/ov5640@3c
[ 2.220184] ti-sysc 4882c000.target-module: probe with driver ti-sysc failed with error -16
[ 2.229187] ti-sysc 4882e000.target-module: probe with driver ti-sysc failed with error -16
[ 2.249938] platform 51000000.pcie: Fixed dependency cycle(s) with /ocp/target-module@51000000/pcie@51000000/interrupt-controller
[ 2.262298] dra7-pcie 51000000.pcie: using DT '/ocp/target-module@51000000/pcie@51000000' for '(default)' GPIO lookup
[ 2.262329] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/ocp/target-module@51000000/pcie@51000000[0]'
[ 2.262359] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/ocp/target-module@51000000/pcie@51000000[0]'
[ 2.262390] dra7-pcie 51000000.pcie: using lookup tables for GPIO lookup
[ 2.262390] dra7-pcie 51000000.pcie: No GPIO consumer (default) found
[ 2.262664] dra7-pcie 51000000.pcie: host bridge /ocp/target-module@51000000/pcie@51000000 ranges:
[ 2.271759] dra7-pcie 51000000.pcie: IO 0x0020003000..0x0020012fff -> 0x0000000000
[ 2.279937] dra7-pcie 51000000.pcie: MEM 0x0020013000..0x002fffffff -> 0x0020013000
[ 2.290130] dra7-pcie 51000000.pcie: iATU: unroll F, 16 ob, 4 ib, align 4K, limit 4G
[ 3.395446] dra7-pcie 51000000.pcie: Phy link never came up
[ 3.401641] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00
[ 3.407989] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.413513] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 3.419738] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[ 3.426696] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400 PCIe Root Port
[ 3.434051] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x000fffff]
[ 3.440032] pci 0000:00:00.0: BAR 1 [mem 0x00000000-0x0000ffff]
[ 3.445983] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 3.451232] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 3.457397] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 3.464202] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref]
[ 3.471527] pci 0000:00:00.0: supports D1
[ 3.475585] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 3.488250] PCI: bus0: Fast back to back transfers disabled
[ 3.494140] PCI: bus1: Fast back to back transfers enabled
[ 3.499694] pci 0000:00:00.0: BAR 0 [mem 0x20100000-0x201fffff]: assigned
[ 3.506561] pci 0000:00:00.0: BAR 1 [mem 0x20020000-0x2002ffff]: assigned
[ 3.513397] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 3.518646] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 3.524261] pci_bus 0000:00: resource 5 [mem 0x20013000-0x2fffffff]
[ 3.530761] genirq: Threaded irq requested with handler=NULL and !ONESHOT for dra7xx-pcie-main (irq 126)
[ 3.540374] dra7-pcie 51000000.pcie: failed to request irq
[ 3.545959] dra7-pcie 51000000.pcie: probe with driver dra7-pcie failed with error -22
[ 3.559783] pcie-clkctrl:0000:0: failed to disable
[ 3.569793] edma 43300000.dma: memcpy is disabled
[ 3.577758] edma 43300000.dma: TI EDMA DMA engine driver
[ 3.588043] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[ 3.595001] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[ 3.602172] omap-iommu 58882000.mmu: 58882000.mmu registered
[ 3.609466] omap-iommu 55082000.mmu: 55082000.mmu registered
[ 3.627044] 5a05a400.target-module:iva:fck: device ID is greater than 24
[ 3.634429] ti-sysc 4ae06000.target-module: Failed to create device link (0x180) with ocp
[ 3.644104] poweroff-gpio gpio-poweroff: using DT '/gpio-poweroff' for '(default)' GPIO lookup
[ 3.644195] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-poweroff[0]' - status (0)
[ 3.644195] gpio gpiochip1: Persistence not supported for GPIO 30
[ 3.645477] reg-fixed-voltage fixedregulator-sd: using DT '/fixedregulator-sd' for '(default)' GPIO lookup
[ 3.645507] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-sd[0]'
[ 3.645538] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator-sd[0]' - status (0)
[ 3.645568] gpio gpiochip9: Persistence not supported for GPIO 5
[ 3.646148] reg-fixed-voltage fixedregulator-mmcwl: using DT '/fixedregulator-mmcwl' for '(default)' GPIO lookup
[ 3.646179] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-mmcwl[0]'
[ 3.646209] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator-mmcwl[0]' - status (0)
[ 3.646240] gpio gpiochip6: Persistence not supported for GPIO 8
[ 3.646575] reg-fixed-voltage fixedregulator-evm_1v8: using DT '/fixedregulator-evm_1v8' for '(default)' GPIO lookup
[ 3.646606] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator-evm_1v8[0]'
[ 3.646636] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-evm_1v8[0]'
[ 3.646636] reg-fixed-voltage fixedregulator-evm_1v8: using lookup tables for GPIO lookup
[ 3.646636] reg-fixed-voltage fixedregulator-evm_1v8: No GPIO consumer (default) found
[ 3.646911] gpio-regulator gpio-regulator-TPS74801: using DT '/gpio-regulator-TPS74801' for '(default)' GPIO lookup
[ 3.646942] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-regulator-TPS74801[0]' - status (0)
[ 3.646942] gpio gpiochip1: Persistence not supported for GPIO 11
[ 3.646972] gpio-regulator gpio-regulator-TPS74801: using DT '/gpio-regulator-TPS74801' for 'enable' GPIO lookup
[ 3.647003] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/gpio-regulator-TPS74801[0]'
[ 3.647033] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/gpio-regulator-TPS74801[0]'
[ 3.647033] gpio-regulator gpio-regulator-TPS74801: using lookup tables for GPIO lookup
[ 3.647033] gpio-regulator gpio-regulator-TPS74801: No GPIO consumer enable found
[ 3.648010] sdhci-omap 4809c000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0' for 'cd' GPIO lookup
[ 3.648101] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]' - status (0)
[ 3.648132] gpio gpiochip7: Persistence not supported for GPIO 27
[ 3.648162] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22)
[ 3.657043] sdhci-omap 4809c000.mmc: Got CD GPIO
[ 3.661682] sdhci-omap 4809c000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0' for 'wp' GPIO lookup
[ 3.661743] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
[ 3.661773] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0[0]'
[ 3.661804] sdhci-omap 4809c000.mmc: using lookup tables for GPIO lookup
[ 3.661804] sdhci-omap 4809c000.mmc: No GPIO consumer wp found
[ 3.663085] sdhci-omap 480d1000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@d1000/mmc@0' for 'wp' GPIO lookup
[ 3.663116] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@d1000/mmc@0[0]'
[ 3.663177] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@d1000/mmc@0[0]'
[ 3.663177] sdhci-omap 480d1000.mmc: using lookup tables for GPIO lookup
[ 3.663208] sdhci-omap 480d1000.mmc: No GPIO consumer wp found
[ 3.664276] sdhci-omap 480d1000.mmc: supply pbias not found, using dummy regulator
[ 3.672729] sdhci-omap 480d1000.mmc: no pinctrl state for sdr104 mode
[ 3.679260] sdhci-omap 480d1000.mmc: no pinctrl state for ddr50 mode
[ 3.685668] sdhci-omap 480d1000.mmc: no pinctrl state for sdr50 mode
[ 3.692047] sdhci-omap 480d1000.mmc: no pinctrl state for hs200_1_8v mode
[ 3.698944] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_1_8v mode
[ 3.705627] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode
[ 3.712280] sdhci-omap 4809c000.mmc: no pinctrl state for hs200_1_8v mode
[ 3.746398] mmc1: SDHCI controller on 480d1000.mmc [480d1000.mmc] using PIO
[ 3.753662] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA
[ 3.761871] sdhci-omap 480b4000.mmc: using DT '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0' for 'wp' GPIO lookup
[ 3.761901] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
[ 3.761932] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0[0]'
[ 3.761962] sdhci-omap 480b4000.mmc: using lookup tables for GPIO lookup
[ 3.761993] sdhci-omap 480b4000.mmc: No GPIO consumer wp found
[ 3.762145] sdhci-omap 480b4000.mmc: supply pbias not found, using dummy regulator
[ 3.793334] mmc2: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA
[ 3.800842] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac
[ 3.825134] TI DP83867 48485000.mdio:02: attached PHY driver (mii_bus:phy_addr=48485000.mdio:02, irq=POLL)
[ 3.886657] mmc2: new HS200 MMC card at address 0001
[ 3.892181] mmcblk2: mmc2:0001 MMC08G 7.25 GiB
[ 3.898101] mmcblk2: p1 p2 p3
[ 3.902130] mmcblk2boot0: mmc2:0001 MMC08G 8.00 MiB
[ 3.908538] mmcblk2boot1: mmc2:0001 MMC08G 8.00 MiB
[ 3.914581] mmcblk2rpmb: mmc2:0001 MMC08G 128 KiB, chardev (250:0)
[ 3.938537] mmc1: Failed to initialize a non-removable card
[ 4.135925] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 4.148712] mmcblk0: mmc0:aaaa SP32G 29.7 GiB
[ 4.156402] mmcblk0: p1 p2
[ 6.968872] cpsw-switch 48484000.switch eth0: Link is Up - 1Gbps/Full - flow control off
[ 7.015441] Sending DHCP requests ., OK
[ 7.059326] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.39
[ 7.067047] IP-Config: Complete:
[ 7.070281] device=eth0, hwaddr=04:a3:16:dd:13:74, ipaddr=192.168.0.39, mask=255.255.255.0, gw=192.168.0.1
[ 7.080444] host=192.168.0.39, domain=ti.com, nis-domain=(none)
[ 7.086853] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
[ 7.086853] nameserver0=192.0.2.2, nameserver1=192.0.2.3
[ 7.099884] clk: Disabling unused clocks
[ 7.104156] PM: genpd: Disabling unused power domains
[ 7.130187] VFS: Mounted root (nfs filesystem) on device 0:17.
[ 7.136566] devtmpfs: mounted
[ 7.140167] Freeing unused kernel image (initmem) memory: 1024K
[ 7.146331] Run /sbin/init as init process
[ 7.150451] with arguments:
[ 7.150451] /sbin/init
[ 7.150451] 0
[ 7.150451] with environment:
[ 7.150451] HOME=/
[ 7.150482] TERM=linux
[ 7.150482] earlyprintk=serial,ttyO0,115200n8
[ 7.464782] systemd[1]: System time before build time, advancing clock.
[ 7.506225] systemd[1]: Inserted module 'autofs4'
[ 7.543182] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 7.566894] systemd[1]: Detected architecture arm.
[ 7.606628] systemd[1]: Set hostname to .
[ 8.521453] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.534759] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.541625] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 8.554107] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 8.587219] systemd[1]: Created slice system-getty.slice.
[ 8.630493] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.638244] systemd[1]: Created slice system-modprobe.slice.
[ 8.680450] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.688171] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 8.731323] systemd[1]: Created slice User and Session Slice.
[ 8.770751] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.810699] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.851104] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.900634] systemd[1]: Reached target Local Encrypted Volumes.
[ 8.940704] systemd[1]: Reached target Paths.
[ 8.980590] systemd[1]: Reached target Remote File Systems.
[ 9.020507] systemd[1]: Reached target Slices.
[ 9.060577] systemd[1]: Reached target Swap.
[ 9.100891] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.141662] systemd[1]: Listening on Journal Audit Socket.
[ 9.181488] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.221069] systemd[1]: Listening on Journal Socket.
[ 9.261444] systemd[1]: Listening on Network Service Netlink Socket.
[ 9.303314] systemd[1]: Listening on udev Control Socket.
[ 9.340911] systemd[1]: Listening on udev Kernel Socket.
[ 9.375946] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 9.416839] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.495849] systemd[1]: Mounting Kernel Debug File System...
[ 9.541015] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.575744] systemd[1]: Mounting Kernel Trace File System...
[ 9.593872] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.622924] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 9.670867] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.706970] systemd[1]: Starting Load Kernel Module configfs...
[ 9.739685] systemd[1]: Starting Load Kernel Module drm...
[ 9.802246] systemd[1]: Starting Load Kernel Module fuse...
[ 9.851898] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 9.897369] systemd[1]: Starting Journal Service...
[ 9.937530] systemd[1]: Starting Load Kernel Modules...
[ 10.018615] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 10.126129] systemd[1]: Starting Coldplug All udev Devices...
[ 10.151458] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.207183] systemd[1]: Mounted Kernel Debug File System.
[ 10.246337] systemd[1]: Mounted Kernel Trace File System.
[ 10.277160] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 10.337249] systemd[1]: modprobe@configfs.service: Succeeded.
[ 10.365600] systemd[1]: Finished Load Kernel Module configfs.
[ 10.387359] systemd[1]: modprobe@drm.service: Succeeded.
[ 10.405700] systemd[1]: Finished Load Kernel Module drm.
[ 10.427062] systemd[1]: modprobe@fuse.service: Succeeded.
[ 10.445953] systemd[1]: Finished Load Kernel Module fuse.
[ 10.468872] systemd[1]: Started Journal Service.
[ 10.565307] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.577178] random: systemd-journal: uninitialized urandom read (16 bytes read)
[ 10.614074] random: systemd-journal: uninitialized urandom read (16 bytes read)
[ 10.906890] systemd-journald[120]: Received client request to flush runtime journal.
[ 10.961059] systemd-journald[120]: File /var/log/journal/c2d1e75df5a44f379b0ba44115d3cbbb/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 11.495483] random: crng init done
[ 11.498931] random: 45 urandom warning(s) missed due to ratelimiting
[ 13.091613] extcon-usb-gpio extcon_usb1: using DT '/extcon_usb1' for 'id' GPIO lookup
[ 13.091674] of_get_named_gpiod_flags: parsed 'id-gpios' property of node '/extcon_usb1[0]' - status (0)
[ 13.091705] gpio gpiochip9: Persistence not supported for GPIO 1
[ 13.091979] extcon-usb-gpio extcon_usb1: using DT '/extcon_usb1' for 'vbus' GPIO lookup
[ 13.092010] of_get_named_gpiod_flags: parsed 'vbus-gpios' property of node '/extcon_usb1[0]' - status (0)
[ 13.092041] gpio gpiochip8: Persistence not supported for GPIO 14
[ 13.101165] extcon-usb-gpio extcon_usb2: using DT '/extcon_usb2' for 'id' GPIO lookup
[ 13.101226] of_get_named_gpiod_flags: parsed 'id-gpios' property of node '/extcon_usb2[0]' - status (0)
[ 13.101226] gpio gpiochip9: Persistence not supported for GPIO 2
[ 13.101470] extcon-usb-gpio extcon_usb2: using DT '/extcon_usb2' for 'vbus' GPIO lookup
[ 13.101501] of_get_named_gpiod_flags: parsed 'vbus-gpios' property of node '/extcon_usb2[0]' - status (0)
[ 13.101531] gpio gpiochip8: Persistence not supported for GPIO 15
[ 13.199645] display-connector connector: using DT '/connector' for 'hpd' GPIO lookup
[ 13.199676] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/connector[0]'
[ 13.199707] of_get_named_gpiod_flags: can't parse 'hpd-gpio' property of node '/connector[0]'
[ 13.199737] display-connector connector: using lookup tables for GPIO lookup
[ 13.199737] display-connector connector: No GPIO consumer hpd found
[ 13.199737] display-connector connector: using DT '/connector' for 'ddc-en' GPIO lookup
[ 13.199768] of_get_named_gpiod_flags: can't parse 'ddc-en-gpios' property of node '/connector[0]'
[ 13.199798] of_get_named_gpiod_flags: can't parse 'ddc-en-gpio' property of node '/connector[0]'
[ 13.199798] display-connector connector: using lookup tables for GPIO lookup
[ 13.199798] display-connector connector: No GPIO consumer ddc-en found
[ 13.201171] tpd12s015 encoder: using DT '/encoder' for '(default)' GPIO lookup
[ 13.201202] of_get_named_gpiod_flags: parsed 'gpios' property of node '/encoder[0]' - status (0)
[ 13.201232] gpio gpiochip10: Persistence not supported for GPIO 4
[ 13.201446] tpd12s015 encoder: using DT '/encoder' for '(default)' GPIO lookup
[ 13.201477] of_get_named_gpiod_flags: parsed 'gpios' property of node '/encoder[1]' - status (0)
[ 13.201507] gpio gpiochip10: Persistence not supported for GPIO 5
[ 13.201629] tpd12s015 encoder: using DT '/encoder' for '(default)' GPIO lookup
[ 13.201660] of_get_named_gpiod_flags: parsed 'gpios' property of node '/encoder[2]' - status (0)
[ 13.201690] gpio gpiochip1: Persistence not supported for GPIO 12
[ 13.399383] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[ 13.482086] omap-sham 4b101000.sham: will run requests pump with realtime priority
[ 13.490295] omap-sham 42701000.sham: hw accel on OMAP rev 4.3
[ 13.658935] omap-sham 42701000.sham: will run requests pump with realtime priority
[ 14.102600] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[ 14.124420] omap_rng 48090000.rng: Random Number Generator ver. 20
[ 14.187866] omap-des 480a5000.des: will run requests pump with realtime priority
[ 14.408721] Driver for 1-wire Dallas network protocol.
[ 14.468261] tlv320aic3x 0-0019: using DT '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/tlv320aic3106@19' for 'reset' GPIO lookup
[ 14.468322] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/tlv320aic3106@19[0]'
[ 14.468353] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/tlv320aic3106@19[0]'
[ 14.468414] of_get_named_gpiod_flags: can't parse 'gpio-reset' property of node '/ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/tlv320aic3106@19[0]'
[ 14.468444] tlv320aic3x 0-0019: using lookup tables for GPIO lookup
[ 14.468444] tlv320aic3x 0-0019: No GPIO consumer reset found
[ 14.504699] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode
[ 14.837310] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d
[ 14.969665] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[ 14.976165] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[ 14.983642] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000
[ 14.991851] remoteproc remoteproc0: 58820000.ipu is available
[ 14.998229] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000
[ 15.006378] remoteproc remoteproc1: 55020000.ipu is available
[ 15.012603] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000
[ 15.020782] remoteproc remoteproc2: 40800000.dsp is available
[ 15.035156] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2
[ 15.044342] remoteproc remoteproc0: powering up 58820000.ipu
[ 15.050079] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2
[ 15.059204] remoteproc remoteproc0: request_firmware failed: -2
[ 15.065216] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2
[ 15.074340] remoteproc remoteproc1: powering up 55020000.ipu
[ 15.080108] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2
[ 15.089263] remoteproc remoteproc1: request_firmware failed: -2
[ 15.096771] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2
[ 15.105926] remoteproc remoteproc2: powering up 40800000.dsp
[ 15.111663] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2
[ 15.120788] remoteproc remoteproc2: request_firmware failed: -2
[ 15.740814] thermal thermal_zone5: Temperature check failed (-19)
[ 16.649719] CAN device driver interface
[ 16.667938] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[ 16.748535] c_can_platform 4ae3c000.can: using DT '/ocp/interconnect@4ae00000/segment@30000/target-module@c000/can@0' for 'termination' GPIO lookup
[ 16.748596] of_get_named_gpiod_flags: can't parse 'termination-gpios' property of node '/ocp/interconnect@4ae00000/segment@30000/target-module@c000/can@0[0]'
[ 16.748626] of_get_named_gpiod_flags: can't parse 'termination-gpio' property of node '/ocp/interconnect@4ae00000/segment@30000/target-module@c000/can@0[0]'
[ 16.748657] c_can_platform 4ae3c000.can: using lookup tables for GPIO lookup
[ 16.748657] c_can_platform 4ae3c000.can: No GPIO consumer termination found
[ 16.749145] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=9fef9477, irq=155)
[ 16.782043] omap-aes 4b500000.aes: will run requests pump with realtime priority
[ 16.789916] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[ 16.835693] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 16.974090] omap-aes 4b700000.aes: will run requests pump with realtime priority
[ 17.159393] asoc-simple-card sound0: using DT '/sound0' for 'simple-audio-card,hp-det' GPIO lookup
[ 17.159423] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpios' property of node '/sound0[0]'
[ 17.159454] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound0[0]'
[ 17.159454] asoc-simple-card sound0: using lookup tables for GPIO lookup
[ 17.159484] asoc-simple-card sound0: No GPIO consumer simple-audio-card,hp-det found
[ 17.159484] asoc-simple-card sound0: using DT '/sound0' for 'simple-audio-card,mic-det' GPIO lookup
[ 17.159515] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpios' property of node '/sound0[0]'
[ 17.159515] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound0[0]'
[ 17.159545] asoc-simple-card sound0: using lookup tables for GPIO lookup
[ 17.159545] asoc-simple-card sound0: No GPIO consumer simple-audio-card,mic-det found
[ 17.227844] DSS: OMAP DSS rev 6.1
[ 17.377471] omapdss_hdmi5 58040000.encoder: supply vdda not found, using dummy regulator
[ 17.471313] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops [omapdrm])
[ 17.480438] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops [omapdrm])
[ 17.579803] dmm 4e000000.dmm: workaround for errata i878 in use
[ 17.666290] dmm 4e000000.dmm: initialized all PAT entries
[ 17.776214] [drm] Initialized omapdrm 1.0.0 for omapdrm.0 on minor 0
[ 18.211242] spi-nor spi0.0: using DT '/ocp/target-module@4b300000/spi@0/flash@0' for 'reset' GPIO lookup
[ 18.211273] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/target-module@4b300000/spi@0/flash@0[0]'
[ 18.211303] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/target-module@4b300000/spi@0/flash@0[0]'
[ 18.211334] spi-nor spi0.0: using lookup tables for GPIO lookup
[ 18.211364] spi-nor spi0.0: No GPIO consumer reset found
[ 18.218353] 10 fixed-partitions partitions found on MTD device spi0.0
[ 18.224853] Creating 10 MTD partitions on "spi0.0":
[ 18.229858] 0x000000000000-0x000000010000 : "QSPI.SPL"
[ 18.298156] 0x000000010000-0x000000020000 : "QSPI.SPL.backup1"
[ 18.329040] 0x000000020000-0x000000030000 : "QSPI.SPL.backup2"
[ 18.336822] [drm] Enabling DMM ywrap scrolling
[ 18.367492] Console: switching to colour frame buffer device 256x72
[ 18.368530] 0x000000030000-0x000000040000 : "QSPI.SPL.backup3"
[ 18.404266] 0x000000040000-0x000000140000 : "QSPI.u-boot"
[ 18.418579] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"
[ 18.436706] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"
[ 18.441650] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"
[ 18.446258] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"
[ 18.450256] 0x0000009e0000-0x000002000000 : "QSPI.file-system"
[ 18.651672] omapdrm omapdrm.0: [drm] fb0: omapdrmdrmfb frame buffer device
[ 18.681884] usbcore: registered new interface driver usbfs
[ 18.687530] usbcore: registered new interface driver hub
[ 18.692932] usbcore: registered new device driver usb
[ 19.182525] dwc3 48890000.usb: changing max_speed on rev 5533202a
[ 19.469726] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 19.475280] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 1
[ 19.511322] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000808002000010
[ 19.520904] xhci-hcd xhci-hcd.5.auto: irq 160, io mem 0x488d0000
[ 19.527221] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 19.532775] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 2
[ 19.540496] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[ 19.586120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 19.594451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.601776] usb usb1: Product: xHCI Host Controller
[ 19.606719] usb usb1: Manufacturer: Linux 6.11.0-rc6 xhci-hcd
[ 19.612487] usb usb1: SerialNumber: xhci-hcd.5.auto
[ 19.646942] hub 1-0:1.0: USB hub found
[ 19.655883] hub 1-0:1.0: 1 port detected
[ 19.672363] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 19.690917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 19.699340] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.706634] usb usb2: Product: xHCI Host Controller
[ 19.711547] usb usb2: Manufacturer: Linux 6.11.0-rc6 xhci-hcd
[ 19.717376] usb usb2: SerialNumber: xhci-hcd.5.auto
[ 19.737274] hub 2-0:1.0: USB hub found
[ 19.746917] hub 2-0:1.0: 1 port detected
[ 20.175445] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 20.356262] usb 1-1: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00
[ 20.364501] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 20.371734] usb 1-1: Product: Cruzer Blade
[ 20.375854] usb 1-1: Manufacturer: SanDisk
[ 20.379974] usb 1-1: SerialNumber: 4C530001100510119265
[ 20.429687] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 20.439880] scsi host0: usb-storage 1-1:1.0
[ 20.450378] usbcore: registered new interface driver usb-storage
[ 21.526641] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
[ 21.558074] sd 0:0:0:0: [sda] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 21.580566] sd 0:0:0:0: [sda] Write Protect is off
[ 21.586151] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 21.586669] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 21.627532] sda: sda1
[ 21.630218] sd 0:0:0:0: [sda] Attached SCSI removable disk
/test #
- 04:51:49 [INFO] Host: echo $?
- 04:51:49 [INFO] Target:
echo $?
0
/test #
- 04:51:49 [INFO] Host: cat result.log
- 04:51:52 [ERROR] On command: cat result.log waiting for cat result.log.+?(?m-ix:^1[\0\n\r]+) >>> error: execution expired
- 04:51:52 [INFO] Target:
cat result.log
/test #
- 04:51:52 [INFO] Host: cd /test
- 04:51:52 [INFO] Target:
cd /test
/test #