Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 DHCP client bound to address 192.168.6.31 (3778 ms) => setenv serverip 192.168.56.76 setenv serverip 192.168.56.76 => tftp 0x12000000 837435/tftp-deploy-06phw3zs/kernel/zImage tftp 0x12000000 837435/tftp-deploy-06phw3zs/kernel/zImage Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '837435/tftp-deploy-06phw3zs/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 4 MiB/s done Bytes transferred = 11444736 (aea200 hex) => tftp 0x13000000 837435/tftp-deploy-06phw3zs/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 837435/tftp-deploy-06phw3zs/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '837435/tftp-deploy-06phw3zs/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 4.2 MiB/s done Bytes transferred = 17957877 (11203f5 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 837435/tftp-deploy-06phw3zs/dtb/imx6dl-udoo.dtb tftp 0x18000000 837435/tftp-deploy-06phw3zs/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '837435/tftp-deploy-06phw3zs/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 3.7 MiB/s done Bytes transferred = 35145 (8949 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0xaea200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17957813 Bytes = 17.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b948 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc2 (KernelCI@build-j341005-arm-gcc-12-multi-v7-defconfig-gn5lj) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 10 22:12:16 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: legacy bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s40844 r8192 d20596 u69632 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008438] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021898] Console: colour dummy device 80x30 <6>[ 0.023825] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.034223] CPU: Testing write buffer coherency: ok <6>[ 0.039350] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.044642] pid_max: default: 32768 minimum: 301 <6>[ 0.049682] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.057106] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.066054] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.072357] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.079318] rcu: Hierarchical SRCU implementation. <6>[ 0.082836] rcu: Max phase no-delay instances is 1000. <6>[ 0.088770] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.099511] EFI services will not be available. <6>[ 0.101725] smp: Bringing up secondary CPUs ... <6>[ 0.107352] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.107376] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.117660] smp: Brought up 1 node, 2 CPUs <6>[ 0.121812] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.128280] CPU: All CPU(s) started in SVC mode. <6>[ 0.133670] Memory: 923720K/1048576K available (16384K kernel code, 2543K rwdata, 6788K rodata, 2048K init, 430K bss, 56428K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.149403] devtmpfs: initialized <6>[ 0.159724] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.165074] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.174993] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.185137] pinctrl core: initialized pinctrl subsystem <6>[ 0.191142] DMI not present or invalid. <6>[ 0.193381] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.200997] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.208755] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.208850] cpuidle: using governor menu <6>[ 0.216830] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.230348] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.236711] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <4>[ 0.252632] mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator <4>[ 0.258457] mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator <6>[ 0.269167] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.277503] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.286209] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.301730] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.308616] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.318152] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.325879] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.333597] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux <6>[ 0.344259] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux <6>[ 0.358237] No ATAGs? <6>[ 0.358401] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.366231] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.375005] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.386619] Serial: AMBA PL011 UART driver <4>[ 0.396923] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.405335] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.414382] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.423498] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.432693] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.441794] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.450958] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.469854] iommu: Default domain type: Translated <6>[ 0.472067] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.489399] SCSI subsystem initialized <6>[ 0.496005] usbcore: registered new interface driver usbfs <6>[ 0.498968] usbcore: registered new interface driver hub <6>[ 0.504519] usbcore: registered new device driver usb <4>[ 0.510094] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 0.519303] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 0.530129] i2c i2c-1: IMX I2C adapter registered <6>[ 0.534015] i2c i2c-2: IMX I2C adapter registered <6>[ 0.539559] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.543536] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.552991] PTP clock support registered <6>[ 0.557344] EDAC MC: Ver: 3.0.0 <6>[ 0.561121] scmi_core: SCMI protocol bus registered <6>[ 0.568877] vgaarb: loaded <6>[ 0.570018] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.587561] NET: Registered PF_INET protocol family <6>[ 0.590159] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.599365] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.606200] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.614167] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.622226] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.629843] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.636368] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.643163] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.650620] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.660286] RPC: Registered named UNIX socket transport module. <6>[ 0.663630] RPC: Registered udp transport module. <6>[ 0.668588] RPC: Registered tcp transport module. <6>[ 0.673588] RPC: Registered tcp-with-tls transport module. <6>[ 0.679289] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.686022] PCI: CLS 0 bytes, default 64 <5>[ 0.691963] Initialise system trusted keyrings <6>[ 0.695292] Trying to unpack rootfs image as initramfs... <6>[ 0.743508] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 0.747862] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.767979] NFS: Registering the id_resolver key type <5>[ 0.770607] Key type id_resolver registered <5>[ 0.774906] Key type id_legacy registered <6>[ 0.779229] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.786192] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.820527] Key type asymmetric registered <5>[ 0.822050] Asymmetric key parser 'x509' registered <6>[ 0.827270] bounce: pool size: 64 pages <6>[ 0.831387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.838927] io scheduler mq-deadline registered <6>[ 0.843764] io scheduler kyber registered <6>[ 0.848006] io scheduler bfq registered <6>[ 0.962128] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.013222] mxs-dma 110000.dma-controller: initialized <6>[ 1.304441] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.315687] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 267, base_baud = 5000000) is a IMX <6>[ 1.321930] printk: legacy console [ttymxc1] enabled <6>[ 1.321930] printk: legacy console [ttymxc1] enabled <6>[ 1.332305] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.332305] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.361540] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 268, base_baud = 5000000) is a IMX <6>[ 1.381384] msm_serial: driver initialized <6>[ 1.386321] SuperH (H)SCI(F) driver initialized <6>[ 1.391683] STMicroelectronics ASC driver initialized <6>[ 1.397195] STM32 USART driver initialized <6>[ 1.463023] brd: module loaded <6>[ 1.487022] loop: module loaded <6>[ 1.528581] CAN device driver interface <6>[ 1.534562] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.542736] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.547986] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.554334] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.560048] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.573356] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.579281] usbcore: registered new interface driver pegasus <6>[ 1.585364] usbcore: registered new interface driver asix <6>[ 1.591140] usbcore: registered new interface driver ax88179_178a <6>[ 1.597581] usbcore: registered new interface driver cdc_ether <6>[ 1.603817] usbcore: registered new interface driver smsc75xx <6>[ 1.609900] usbcore: registered new interface driver smsc95xx <6>[ 1.616041] usbcore: registered new interface driver net1080 <6>[ 1.622067] usbcore: registered new interface driver cdc_subset <6>[ 1.628300] usbcore: registered new interface driver zaurus <6>[ 1.634211] usbcore: registered new interface driver cdc_ncm <6>[ 1.646296] usbcore: registered new interface driver usb-storage <4>[ 1.655000] imx_usb 2184000.usb: No over current polarity defined <3>[ 2.370353] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 2.377886] imx_usb 2184200.usb: No over current polarity defined <6>[ 2.389028] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 2.394326] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 2.430132] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 2.430817] Freeing initrd memory: 17540K <6>[ 2.440391] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <6>[ 2.449514] hub 1-0:1.0: USB hub found <6>[ 2.453692] hub 1-0:1.0: 1 port detected <6>[ 2.467371] i2c_dev: i2c /dev entries driver <6>[ 2.495722] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.502245] sdhci: Copyright(c) Pierre Ossman <6>[ 2.509551] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.518206] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.530961] usbcore: registered new interface driver usbhid <6>[ 2.531274] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 2.536822] usbhid: USB HID core driver <4>[ 2.550651] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. <6>[ 2.559048] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 (8000003f) counters available <6>[ 2.573510] NET: Registered PF_INET6 protocol family <6>[ 2.580748] Segment Routing with IPv6 <6>[ 2.584789] In-situ OAM (IOAM) with IPv6 <6>[ 2.589089] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.596126] NET: Registered PF_PACKET protocol family <6>[ 2.601518] can: controller area network core <6>[ 2.606200] NET: Registered PF_CAN protocol family <6>[ 2.610276] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 2.611301] can: raw protocol <6>[ 2.621665] can: broadcast manager protocol <6>[ 2.626131] can: netlink gateway - max_hops=1 <5>[ 2.631367] Key type dns_resolver registered <6>[ 2.638139] ThumbEE CPU extension supported. <5>[ 2.642814] Registering SWP/SWPB emulation handler <5>[ 2.657401] Loading compiled-in X.509 certificates <4>[ 2.658142] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 2.672985] mmc2: new high speed SDXC card at address 59b4 <6>[ 2.679925] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 2.686574] pps pps0: new PPS source ptp0 <6>[ 2.687773] mmcblk2: p1 p2 <6>[ 2.727343] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 2.735842] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <6>[ 2.747669] usb 1-1: new full-speed USB device number 2 using ci_hdrc <6>[ 2.823460] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <3>[ 2.980083] usb 1-1: device descriptor read/64, error -71 <3>[ 3.310085] usb 1-1: device descriptor read/64, error -71 <6>[ 3.550100] usb 1-1: new full-speed USB device number 3 using ci_hdrc <3>[ 3.780080] usb 1-1: device descriptor read/64, error -71 <3>[ 4.110065] usb 1-1: device descriptor read/64, error -71 <6>[ 4.220215] usb usb1-port1: attempt power cycle <6>[ 4.640076] usb 1-1: new full-speed USB device number 4 using ci_hdrc <3>[ 5.120064] usb 1-1: device not accepting address 4, error -71 <6>[ 5.250115] usb 1-1: new full-speed USB device number 5 using ci_hdrc <3>[ 5.730089] usb 1-1: device not accepting address 5, error -71 <3>[ 5.736328] usb usb1-port1: unable to enumerate USB device <6>[ 5.940802] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <5>[ 5.970043] Sending DHCP requests ..., OK <6>[ 13.204515] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.31 <6>[ 13.212535] IP-Config: Complete: <6>[ 13.216049] device=eth0, hwaddr=00:c0:08:88:29:80, ipaddr=192.168.6.31, mask=255.255.255.0, gw=192.168.6.1 <6>[ 13.226465] host=192.168.6.31, domain=, nis-domain=(none) <6>[ 13.232582] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 13.232592] nameserver0=10.255.253.1 <6>[ 13.244225] clk: Disabling unused clocks <6>[ 13.248645] PM: genpd: Disabling unused power domains <6>[ 13.256460] Freeing unused kernel image (initmem) memory: 2048K <6>[ 13.263168] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 13.404560] udevd[92]: starting version 3.2.9 <5>[ 18.940013] random: crng init done <27>[ 18.951752] udevd[92]: specified user 'tss' unknown <27>[ 18.957134] udevd[92]: specified group 'tss' unknown <30>[ 18.966165] udevd[93]: starting eudev-3.2.9 <6>[ 19.551175] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 19.600600] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) <6>[ 19.613126] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 19.621895] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 19.630460] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) <6>[ 19.679941] [drm] Initialized imx-drm 1.0.0 for display-subsystem on minor 0 <6>[ 19.687382] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 19.695525] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 19.708998] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 19.738940] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 19.790257] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 <4>[ 19.807281] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW <6>[ 19.840209] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 19.851457] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 1 <6>[ 19.995472] caam 2100000.crypto: Entropy delay = 3200 <6>[ 20.013379] caam 2100000.crypto: Instantiated RNG4 SH0 <6>[ 20.025854] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 20.031308] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) <6>[ 20.038201] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 20.127606] usbcore: registered new device driver onboard-usb-dev <4>[ 20.141053] onboard-usb-dev 2184200.usb:usb-port@1: supply vdd not found, using dummy regulator <6>[ 20.491645] usb 1-1: new high-speed USB device number 6 using ci_hdrc <6>[ 20.705793] hub 1-1:1.0: USB hub found <6>[ 20.711738] hub 1-1:1.0: 4 ports detected <6>[ 20.750972] caam algorithms registered in /proc/crypto <6>[ 20.756644] caam 2100000.crypto: registering rng-caam <6>[ 20.762638] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # <6>[ 21.010072] usb 1-1.3: new high-speed USB device number 7 using ci_hdrc / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-837435/environment . /lava-837435/environment / # /lava-837435/bin/lava-test-runner /lava-837435/0 /lava-837435/bin/lava-test-runner /lava-837435/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-837435/0/tests/0_dmesg + cat uuid + UUID=837435_1.5.2.4.1 <8>[ 21.563997] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 21.613451] <8>[ 21.658066] <8>[ 21.702954] + set +x <8>[ 21.713849] / #