connecting to NetworkSerialPort(target=Target(name='sun7i-a20-cubieboard2', env=None), name='default', state=, avail=True, host='nuc-1', port=44227, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t nuc-1:44227 connected to 192.168.0.1 (port 44227) Escape character: Ctrl-\ Type the escape character to get to the prompt. U-Boot SPL 2019.07 (Aug 23 2019 - 14:55:24 -0700) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2019.07 (Aug 23 2019 - 14:55:24 -0700) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Cubietech Cubieboard2 I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@1c50000 starting USB... Bus usb@1c14000: USB EHCI 1.00 Bus usb@1c14400: USB OHCI 1.0 Bus usb@1c1c000: USB EHCI 1.00 Bus usb@1c1c400: USB OHCI 1.0 scanning bus usb@1c14000 for devices... 1 USB Device(s) found scanning bus usb@1c14400 for devices... 1 USB Device(s) found scanning bus usb@1c1c000 for devices... 1 USB Device(s) found scanning bus usb@1c1c400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 2  0 => setenv autoload no => setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff => setenv ethaddr 22:71:81:DA:53:EA => dhcp Speed: 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 192.168.0.197 (3253 ms) => setenv serverip 192.168.0.2 => tftp 0x42000000 3906293/tftp-deploy-9_0md4wz/kernel/zImage Speed: 100, full duplex Using ethernet@1c50000 device TFTP from server 192.168.0.2; our IP address is 192.168.0.197 Filename '3906293/tftp-deploy-9_0md4wz/kernel/zImage'. Load address: 0x42000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################# 1.4 MiB/s done Bytes transferred = 5572416 (550740 hex) => tftp 0x43300000 3906293/tftp-deploy-9_0md4wz/ramdisk/ramdisk.cpio.gz.uboot Speed: 100, full duplex Using ethernet@1c50000 device TFTP from server 192.168.0.2; our IP address is 192.168.0.197 Filename '3906293/tftp-deploy-9_0md4wz/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x43300000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #######T ##T ######################################################## ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ## 528.3 KiB/s done Bytes transferred = 7992589 (79f50d hex) => setenv initrd_size ${filesize} => tftp 0x43000000 3906293/tftp-deploy-9_0md4wz/dtb/sun7i-a20-cubieboard2.dtb Speed: 100, full duplex Using ethernet@1c50000 device TFTP from server 192.168.0.2; our IP address is 192.168.0.197 Filename '3906293/tftp-deploy-9_0md4wz/dtb/sun7i-a20-cubieboard2.dtb'. Load address: 0x43000000 Loading: *###### 1.1 MiB/s done Bytes transferred = 25733 (6485 hex) => setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x42000000 0x43300000 0x43000000 ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 7992525 Bytes = 7.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 EHCI failed to shut down host controller. Using Device Tree in place at 43000000, end 43009484 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc5 (KernelCI@build-j359747-arm-gcc-12-sunxi-defconfig-mkhrz) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sat Nov 2 04:14:55 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Cubietech Cubieboard2 [ 0.000000] earlycon: uart0 at MMIO32 0x01c28000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x4a000000..0x4fffffff (98304 KiB) map reusable default-pool [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 13 pages/cpu s21004 r8192 d24052 u53248 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] GIC: Using split EOI/Deactivate mode <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.008267] Switching to timer-based delay loop, resolution 41ns <6>[ 0.014862] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.024851] Console: colour dummy device 80x30 <6>[ 0.029641] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040277] CPU: Testing write buffer coherency: ok <6>[ 0.045470] pid_max: default: 32768 minimum: 301 <6>[ 0.050597] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.058181] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <3>[ 0.067399] /cpus/cpu@0 missing clock-frequency property <3>[ 0.073032] /cpus/cpu@1 missing clock-frequency property <6>[ 0.078674] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.086267] Setting up static identity map for 0x40100000 - 0x40100060 <6>[ 0.093449] rcu: Hierarchical SRCU implementation. <6>[ 0.098513] rcu: Max phase no-delay instances is 1000. <6>[ 0.104482] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.113593] smp: Bringing up secondary CPUs ... <6>[ 0.129725] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.129975] smp: Brought up 1 node, 2 CPUs <6>[ 0.140289] SMP: Total of 2 processors activated (96.00 BogoMIPS). <6>[ 0.146729] CPU: All CPU(s) started in HYP mode. <6>[ 0.151627] CPU: Virtualization extensions available. <6>[ 0.157622] Memory: 918180K/1048576K available (8192K kernel code, 954K rwdata, 2412K rodata, 1024K init, 263K bss, 30728K reserved, 98304K cma-reserved, 262144K highmem) <6>[ 0.173946] devtmpfs: initialized <6>[ 0.184342] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 <6>[ 0.192613] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.202775] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.213557] pinctrl core: initialized pinctrl subsystem <6>[ 0.221202] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.228757] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.237125] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.237420] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.252021] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.265264] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 <6>[ 0.274198] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 <6>[ 0.283999] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 <6>[ 0.294024] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 <6>[ 0.302878] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 <6>[ 0.312700] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 <6>[ 0.324078] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 <6>[ 0.333069] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 <6>[ 0.342040] platform 1c16000.hdmi: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 <6>[ 0.351019] platform 1c16000.hdmi: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 <6>[ 0.364931] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 <6>[ 0.374990] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 <6>[ 0.385244] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 <6>[ 0.395229] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 <6>[ 0.405499] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 <6>[ 0.415576] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 <6>[ 0.425603] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 <6>[ 0.435440] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 <6>[ 0.445295] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 <6>[ 0.455148] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 <6>[ 0.465002] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e20000 <6>[ 0.475029] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e00000 <6>[ 0.485364] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 <6>[ 0.495423] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 <6>[ 0.505462] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 <6>[ 0.515297] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 <6>[ 0.525157] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 <6>[ 0.534985] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 <6>[ 0.544837] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e20000 <6>[ 0.554853] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e00000 <6>[ 0.566696] platform 1c16000.hdmi: Fixed dependency cycle(s) with /hdmi-connector <6>[ 0.574625] platform hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi@1c16000 <5>[ 0.587250] SCSI subsystem initialized <6>[ 0.591951] usbcore: registered new interface driver usbfs <6>[ 0.597844] usbcore: registered new interface driver hub <6>[ 0.603478] usbcore: registered new device driver usb <6>[ 0.609127] mc: Linux media interface: v0.10 <6>[ 0.613745] videodev: Linux video capture interface: v2.00 <6>[ 0.619634] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.624860] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.634299] PTP clock support registered <6>[ 0.639183] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.647140] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.666842] NET: Registered PF_INET protocol family <6>[ 0.672411] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.682479] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.691199] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.699250] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.707345] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.715165] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.722013] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.729006] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.736608] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.743710] RPC: Registered named UNIX socket transport module. <6>[ 0.750003] RPC: Registered udp transport module. <6>[ 0.754972] RPC: Registered tcp transport module. <6>[ 0.759947] RPC: Registered tcp-with-tls transport module. <6>[ 0.765689] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.773993] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 0.781794] NFS: Registering the id_resolver key type <6>[ 0.784256] Unpacking initramfs... <5>[ 0.787249] Key type id_resolver registered <5>[ 0.795330] Key type id_legacy registered <6>[ 0.800222] bounce: pool size: 64 pages <6>[ 0.804550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.812325] io scheduler mq-deadline registered <6>[ 0.817177] io scheduler kyber registered <6>[ 0.821577] io scheduler bfq registered <6>[ 0.949319] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled <6>[ 0.968969] sun4i-drm display-engine: bound 1e00000.display-frontend (ops 0xc0954824) <6>[ 0.977406] sun4i-drm display-engine: bound 1e20000.display-frontend (ops 0xc0954824) <6>[ 0.986051] sun4i-drm display-engine: bound 1e60000.display-backend (ops 0xc0953f94) <6>[ 0.994658] sun4i-drm display-engine: bound 1e40000.display-backend (ops 0xc0953f94) <6>[ 1.003711] sun4i-drm display-engine: No panel or bridge found... RGB output disabled <6>[ 1.012010] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0952734) <6>[ 1.020937] sun4i-drm display-engine: No panel or bridge found... RGB output disabled <6>[ 1.029174] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xc0952734) <6>[ 1.039539] sun4i-drm display-engine: bound 1c16000.hdmi (ops 0xc0954f5c) <6>[ 1.048661] [drm] Initialized sun4i-drm 1.0.0 for display-engine on minor 0 <6>[ 1.064539] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 <6>[ 1.071421] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 <6>[ 1.078352] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 <6>[ 1.085020] lima 1c40000.gpu: l2_cache0 64K, 4-way, 64byte cache line, 64bit external bus <6>[ 1.115949] lima 1c40000.gpu: bus rate = 300000000 <6>[ 1.121212] lima 1c40000.gpu: mod rate = 384000000 <6>[ 1.127377] [drm] Initialized lima 1.1.0 for 1c40000.gpu on minor 1 <6>[ 1.138268] CAN device driver interface <6>[ 1.147987] sunxi-rtc 1c20d00.rtc: registered as rtc0 <6>[ 1.153465] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01T01:14:39 UTC (4479) <6>[ 1.162427] i2c_dev: i2c /dev entries driver <6>[ 1.171418] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) <6>[ 1.181636] sun4i-ss 1c15000.crypto-engine: no reset control found <6>[ 1.188347] sun4i-ss 1c15000.crypto-engine: Die ID 0 <6>[ 1.195106] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns <6>[ 1.205847] usbcore: registered new interface driver usbhid <6>[ 1.211818] usbhid: USB HID core driver <6>[ 1.217398] cedrus 1c0e000.video-codec: Device registered as /dev/video0 <4>[ 1.226351] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. <6>[ 1.235290] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 (8000000f) counters available <6>[ 1.256079] NET: Registered PF_PACKET protocol family <6>[ 1.261573] can: controller area network core <6>[ 1.266324] NET: Registered PF_CAN protocol family <6>[ 1.271549] can: raw protocol <6>[ 1.274832] can: broadcast manager protocol <6>[ 1.279382] can: netlink gateway - max_hops=1 <5>[ 1.284366] Key type dns_resolver registered <5>[ 1.289345] Registering SWP/SWPB emulation handler <4>[ 1.325114] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 1.336860] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver <4>[ 1.344925] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator <4>[ 1.354921] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator <6>[ 1.365244] printk: legacy console [ttyS0] disabled <6>[ 1.391534] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 80, base_baud = 1500000) is a U6_16550A <6>[ 1.400452] Freeing initrd memory: 7808K <6>[ 1.405134] printk: legacy console [ttyS0] enabled <6>[ 1.405134] printk: legacy console [ttyS0] enabled <6>[ 1.415311] printk: legacy bootconsole [uart0] disabled <6>[ 1.415311] printk: legacy bootconsole [uart0] disabled <4>[ 1.428748] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator <4>[ 1.436736] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator <6>[ 1.507273] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP <4>[ 1.515041] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 <6>[ 1.521277] ahci-sunxi 1c18000.sata: AHCI vers 0001.0100, 32 command slots, 3 Gbps, platform mode <6>[ 1.530450] ahci-sunxi 1c18000.sata: 1/1 ports implemented (port mask 0x1) <6>[ 1.537620] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc <6>[ 1.548897] scsi host0: ahci-sunxi <6>[ 1.552917] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 81 lpm-pol 0 <4>[ 1.562935] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator <6>[ 1.571907] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found <6>[ 1.578593] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found <6>[ 1.584779] sun7i-dwmac 1c50000.ethernet: IRQ sfty not found <6>[ 1.590891] sun7i-dwmac 1c50000.ethernet: PTP uses main clock <6>[ 1.596949] sun7i-dwmac 1c50000.ethernet: no regulator found <6>[ 1.603362] sun7i-dwmac 1c50000.ethernet: Version ID not available <6>[ 1.609901] sun7i-dwmac 1c50000.ethernet: DWMAC1000 <6>[ 1.615140] sun7i-dwmac 1c50000.ethernet: No HW DMA feature register supported <6>[ 1.622663] sun7i-dwmac 1c50000.ethernet: TX Checksum insertion supported <6>[ 1.629751] sun7i-dwmac 1c50000.ethernet: Normal descriptors <6>[ 1.635673] sun7i-dwmac 1c50000.ethernet: Ring mode enabled <6>[ 1.658998] axp20x-i2c 1-0034: AXP20x variant AXP209 found <6>[ 1.680848] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp20x-pek/input/input0 <4>[ 1.692191] axp20x-adc axp20x-adc: DMA mask not set <4>[ 1.701445] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set <6>[ 1.719134] axp20x-i2c 1-0034: AXP20X driver loaded <6>[ 1.727413] Registered IR keymap rc-empty <6>[ 1.731841] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0 <6>[ 1.738991] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input1 <6>[ 1.747535] sunxi-ir 1c21800.ir: initialized sunXi IR driver <4>[ 1.760123] usb_phy_generic usb_phy_generic.0.auto: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 1.768082] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator <6>[ 1.771464] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver <6>[ 1.785065] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 <6>[ 1.794711] hub 1-0:1.0: USB hub found <6>[ 1.798938] hub 1-0:1.0: 1 port detected <6>[ 1.806287] ehci-platform 1c14000.usb: EHCI Host Controller <6>[ 1.812360] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 2 <6>[ 1.820691] sunxi-mmc 1c0f000.mmc: Got CD GPIO <6>[ 1.823708] ehci-platform 1c1c000.usb: EHCI Host Controller <6>[ 1.827753] ohci-platform 1c14400.usb: Generic Platform OHCI controller <6>[ 1.831368] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3 <6>[ 1.838249] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4 <6>[ 1.855880] ohci-platform 1c1c400.usb: Generic Platform OHCI controller <6>[ 1.862906] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5 <6>[ 1.871649] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB <6>[ 1.879461] ohci-platform 1c14400.usb: irq 130, io mem 0x01c14400 <6>[ 1.886106] ehci-platform 1c14000.usb: irq 128, io mem 0x01c14000 <6>[ 1.892583] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 1.892969] ohci-platform 1c1c400.usb: irq 131, io mem 0x01c1c400 <6>[ 1.904873] ehci-platform 1c1c000.usb: irq 129, io mem 0x01c1c000 <6>[ 1.911335] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 <6>[ 1.919027] hub 2-0:1.0: USB hub found <6>[ 1.923148] hub 2-0:1.0: 1 port detected <6>[ 1.937142] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 <6>[ 1.944227] hub 4-0:1.0: USB hub found <6>[ 1.948389] hub 4-0:1.0: 1 port detected <6>[ 1.954264] hub 3-0:1.0: USB hub found <6>[ 1.959589] hub 3-0:1.0: 1 port detected <4>[ 1.971376] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 1.978122] hub 5-0:1.0: USB hub found <6>[ 1.983728] hub 5-0:1.0: 1 port detected <6>[ 1.988208] mmc0: new high speed SDHC card at address aaaa <6>[ 1.995153] mmcblk0: mmc0:aaaa SS08G 7.40 GiB <6>[ 2.007747] mmcblk0: p1 <6>[ 2.013871] sun7i-dwmac 1c50000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 2.022835] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8201CP Ethernet] (irq=POLL) <6>[ 2.032597] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support found <4>[ 2.040189] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled <6>[ 2.047785] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available <6>[ 2.055703] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW <6>[ 2.063244] sun7i-dwmac 1c50000.ethernet eth0: configuring for phy/mii link mode <6>[ 4.179219] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx <5>[ 4.207163] Sending DHCP requests ., OK <6>[ 4.252195] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.197 <6>[ 4.260582] IP-Config: Complete: <6>[ 4.264146] device=eth0, hwaddr=22:71:81:da:53:ea, ipaddr=192.168.0.197, mask=255.255.255.0, gw=192.168.0.254 <6>[ 4.275015] host=192.168.0.197, domain=shed, nis-domain=(none) <6>[ 4.281662] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= <6>[ 4.281695] nameserver0=192.168.0.1, nameserver1=192.168.1.254 <6>[ 4.295925] clk: Disabling unused clocks <6>[ 4.300592] ALSA device list: <6>[ 4.303881] #0: sun4i-codec <6>[ 4.311478] Freeing unused kernel image (initmem) memory: 1024K <6>[ 4.318210] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 4.556155] udevd[98]: starting version 3.2.9 <5>[ 8.547131] random: crng init done <27>[ 8.561086] udevd[98]: specified user 'tss' unknown <27>[ 8.566549] udevd[98]: specified group 'tss' unknown <30>[ 8.575958] udevd[100]: starting eudev-3.2.9 done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # / # export SHELL=/bin/sh / # . /lava-3906293/environment / # /lava-3906293/bin/lava-test-runner /lava-3906293/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-3906293/0/tests/0_dmesg + cat uuid + UUID=3906293_1.5.2.4.1 <8>[ 10.493414] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 10.549848] <8>[ 10.608553] <8>[ 10.678743] + set +x <8>[ 10.691758] / #