Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.1.4:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: UDOO Quad DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete....... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.6.15 (776 ms) => setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 => tftp 0x12000000 931486/tftp-deploy-90tdfcc_/kernel/zImage tftp 0x12000000 931486/tftp-deploy-90tdfcc_/kernel/zImage Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.15 Filename '931486/tftp-deploy-90tdfcc_/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## 8 MiB/s done Bytes transferred = 10994176 (a7c200 hex) => tftp 0x13000000 931486/tftp-deploy-90tdfcc_/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 931486/tftp-deploy-90tdfcc_/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.15 Filename '931486/tftp-deploy-90tdfcc_/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 7.8 MiB/s done Bytes transferred = 17846860 (110524c hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 931486/tftp-deploy-90tdfcc_/dtb/imx6q-udoo.dtb tftp 0x18000000 931486/tftp-deploy-90tdfcc_/dtb/imx6q-udoo.dtb Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.15 Filename '931486/tftp-deploy-90tdfcc_/dtb/imx6q-udoo.dtb'. Load address: 0x18000000 Loading: *### 5 MiB/s done Bytes transferred = 36482 (8e82 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0xa7c200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17846796 Bytes = 17 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800be81 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc5 (KernelCI@build-j361093-arm-gcc-12-multi-v7-defconfig-config-smp-n-p5725) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Sun Nov 3 23:07:33 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Quad Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: legacy bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:129 arm_dt_init_cpu_maps+0xbc/0x120 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.12.0-rc5 #1 [ 0.000000] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 0.000000] Call trace: [ 0.000000] unwind_backtrace from show_stack+0x10/0x14 [ 0.000000] show_stack from dump_stack_lvl+0x50/0x58 [ 0.000000] dump_stack_lvl from __warn+0x7c/0x104 [ 0.000000] __warn from warn_slowpath_fmt+0x98/0xc8 [ 0.000000] warn_slowpath_fmt from arm_dt_init_cpu_maps+0xbc/0x120 [ 0.000000] arm_dt_init_cpu_maps from setup_arch+0x44c/0x680 [ 0.000000] setup_arch from start_kernel+0x68/0x6a4 [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008439] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021666] Console: colour dummy device 80x30 <6>[ 0.023567] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.033977] CPU: Testing write buffer coherency: ok <6>[ 0.039102] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.044402] pid_max: default: 32768 minimum: 301 <6>[ 0.049391] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.056854] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.095687] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.103229] EFI services will not be available. <6>[ 0.105202] Memory: 926744K/1048576K available (15360K kernel code, 2542K rwdata, 6716K rodata, 2048K init, 413K bss, 54156K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.121185] devtmpfs: initialized <6>[ 0.130618] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.135908] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.145820] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.155319] pinctrl core: initialized pinctrl subsystem <6>[ 0.161582] DMI not present or invalid. <6>[ 0.163767] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.171041] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.178451] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.178480] cpuidle: using governor menu <6>[ 0.186871] CPU identified as i.MX6Q, silicon rev 1.2 <6>[ 0.199932] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.206005] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 <6>[ 0.212950] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <4>[ 0.228134] mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator <4>[ 0.233771] mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator <6>[ 0.242591] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.251877] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.260861] platform 20e0000.iomuxc-gpr:ipu2_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2800000 <6>[ 0.275142] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.281974] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.289692] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.297431] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux <6>[ 0.311730] platform 20e0000.iomuxc-gpr:ipu2_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2800000 <6>[ 0.318555] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 <6>[ 0.326278] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.334010] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux <6>[ 0.347059] No ATAGs? <6>[ 0.347104] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.355354] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.363521] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.374573] Serial: AMBA PL011 UART driver <4>[ 0.407357] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.427317] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.435012] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.457476] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.480589] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.488318] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.506928] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.538876] iommu: Default domain type: Translated <6>[ 0.541080] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.548526] SCSI subsystem initialized <6>[ 0.562697] usbcore: registered new interface driver usbfs <6>[ 0.565624] usbcore: registered new interface driver hub <6>[ 0.571203] usbcore: registered new device driver usb <4>[ 0.576678] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 0.585923] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 0.596488] i2c i2c-1: IMX I2C adapter registered <6>[ 0.600505] i2c i2c-2: IMX I2C adapter registered <6>[ 0.606065] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.610225] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.619646] PTP clock support registered <6>[ 0.623967] EDAC MC: Ver: 3.0.0 <6>[ 0.689314] scmi_core: SCMI protocol bus registered <6>[ 0.704173] vgaarb: loaded <6>[ 0.704587] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.730057] NET: Registered PF_INET protocol family <6>[ 0.732594] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.741728] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.748738] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.756723] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.764791] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.772232] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.778809] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.785537] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.792842] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.869165] RPC: Registered named UNIX socket transport module. <6>[ 0.872500] RPC: Registered udp transport module. <6>[ 0.877477] RPC: Registered tcp transport module. <6>[ 0.882416] RPC: Registered tcp-with-tls transport module. <6>[ 0.888170] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.894871] PCI: CLS 0 bytes, default 64 <5>[ 0.900290] Initialise system trusted keyrings <6>[ 0.919169] Trying to unpack rootfs image as initramfs... <6>[ 0.975632] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 0.979840] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.005007] NFS: Registering the id_resolver key type <5>[ 1.007533] Key type id_resolver registered <5>[ 1.011910] Key type id_legacy registered <6>[ 1.016225] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.023135] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 1.085513] Key type asymmetric registered <5>[ 1.087026] Asymmetric key parser 'x509' registered <6>[ 1.092256] bounce: pool size: 64 pages <6>[ 1.096328] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 1.103904] io scheduler mq-deadline registered <6>[ 1.108701] io scheduler kyber registered <6>[ 1.112974] io scheduler bfq registered <6>[ 1.137097] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.298701] mxs-dma 110000.dma-controller: initialized <6>[ 1.556221] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.568641] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 259, base_baud = 5000000) is a IMX <6>[ 1.574827] printk: legacy console [ttymxc1] enabled <6>[ 1.574827] printk: legacy console [ttymxc1] enabled <6>[ 1.585215] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.585215] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.665705] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 260, base_baud = 5000000) is a IMX <6>[ 1.695908] msm_serial: driver initialized <6>[ 1.700771] SuperH (H)SCI(F) driver initialized <6>[ 1.706023] STMicroelectronics ASC driver initialized <6>[ 1.711489] STM32 USART driver initialized <6>[ 1.818176] brd: module loaded <6>[ 1.846740] loop: module loaded <6>[ 1.853252] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 <6>[ 1.861500] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 <6>[ 1.869789] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 <6>[ 1.878250] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 <4>[ 1.886254] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator <4>[ 1.893977] ahci-imx 2200000.sata: supply phy not found, using dummy regulator <4>[ 1.901532] ahci-imx 2200000.sata: supply target not found, using dummy regulator <6>[ 2.056712] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled <6>[ 2.063977] ahci-imx 2200000.sata: AHCI vers 0001.0300, 32 command slots, 3 Gbps, platform mode <6>[ 2.072973] ahci-imx 2200000.sata: 1/1 ports implemented (port mask 0x1) <6>[ 2.079959] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst <6>[ 2.162690] scsi host0: ahci-imx <6>[ 2.174891] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 261 lpm-pol 0 <6>[ 2.223227] CAN device driver interface <6>[ 2.228753] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.236365] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.241599] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.247833] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.253500] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.265011] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.270889] usbcore: registered new interface driver pegasus <6>[ 2.276869] usbcore: registered new interface driver asix <6>[ 2.282563] usbcore: registered new interface driver ax88179_178a <6>[ 2.288990] usbcore: registered new interface driver cdc_ether <6>[ 2.295137] usbcore: registered new interface driver smsc75xx <6>[ 2.301179] usbcore: registered new interface driver smsc95xx <6>[ 2.307232] usbcore: registered new interface driver net1080 <6>[ 2.313184] usbcore: registered new interface driver cdc_subset <6>[ 2.319412] usbcore: registered new interface driver zaurus <6>[ 2.325292] usbcore: registered new interface driver cdc_ncm <6>[ 2.336378] usbcore: registered new interface driver usb-storage <4>[ 2.344674] imx_usb 2184000.usb: No over current polarity defined <6>[ 2.554786] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 2.560513] ahci-imx 2200000.sata: no device found, disabling link. <6>[ 2.567070] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug <3>[ 3.545350] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 3.552668] imx_usb 2184200.usb: No over current polarity defined <6>[ 3.588255] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 3.593445] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 3.634955] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 3.645428] hub 1-0:1.0: USB hub found <6>[ 3.654807] hub 1-0:1.0: 1 port detected <6>[ 3.673031] i2c_dev: i2c /dev entries driver <6>[ 3.730925] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.737426] sdhci: Copyright(c) Pierre Ossman <6>[ 3.744432] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.752759] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.764095] usbcore: registered new interface driver usbhid <6>[ 3.769960] usbhid: USB HID core driver <6>[ 3.779555] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 (8000003f) counters available <6>[ 3.792401] NET: Registered PF_INET6 protocol family <6>[ 3.805513] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 3.875731] Segment Routing with IPv6 <6>[ 3.879738] In-situ OAM (IOAM) with IPv6 <6>[ 3.884063] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.890873] NET: Registered PF_PACKET protocol family <6>[ 3.896228] can: controller area network core <6>[ 3.900897] NET: Registered PF_CAN protocol family <6>[ 3.905973] can: raw protocol <6>[ 3.909213] can: broadcast manager protocol <6>[ 3.913671] can: netlink gateway - max_hops=1 <5>[ 3.918751] Key type dns_resolver registered <6>[ 3.925081] ThumbEE CPU extension supported. <5>[ 3.929633] Registering SWP/SWPB emulation handler <5>[ 4.005179] Loading compiled-in X.509 certificates <6>[ 4.015015] usb 1-1: new full-speed USB device number 2 using ci_hdrc <6>[ 4.049146] pps pps0: new PPS source ptp0 <6>[ 4.167733] Freeing initrd memory: 17432K <6>[ 4.172231] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <6>[ 4.217363] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 4.243751] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 4.251933] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <3>[ 4.263690] usb 1-1: device descriptor read/64, error -71 <4>[ 4.300777] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 4.311201] mmc2: new high speed SDXC card at address 59b4 <6>[ 4.317615] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <6>[ 4.330343] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 4.338433] mmcblk2: p1 p2 <3>[ 4.594649] usb 1-1: device descriptor read/64, error -71 <6>[ 4.834647] usb 1-1: new full-speed USB device number 3 using ci_hdrc <3>[ 5.064663] usb 1-1: device descriptor read/64, error -71 <3>[ 5.394651] usb 1-1: device descriptor read/64, error -71 <6>[ 5.504704] usb usb1-port1: attempt power cycle <6>[ 5.924650] usb 1-1: new full-speed USB device number 4 using ci_hdrc <3>[ 6.404644] usb 1-1: device not accepting address 4, error -71 <6>[ 6.534640] usb 1-1: new full-speed USB device number 5 using ci_hdrc <3>[ 7.014636] usb 1-1: device not accepting address 5, error -71 <3>[ 7.020824] usb usb1-port1: unable to enumerate USB device <6>[ 10.585300] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <5>[ 10.614609] Sending DHCP requests ., OK <6>[ 10.658764] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.15 <6>[ 10.666744] IP-Config: Complete: <6>[ 10.670247] device=eth0, hwaddr=00:c0:08:88:16:0e, ipaddr=192.168.6.15, mask=255.255.255.0, gw=192.168.6.1 <6>[ 10.680649] host=192.168.6.15, domain=, nis-domain=(none) <6>[ 10.686790] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 10.686811] nameserver0=10.255.253.1 <6>[ 10.698570] clk: Disabling unused clocks <6>[ 10.703093] PM: genpd: Disabling unused power domains <6>[ 10.711605] Freeing unused kernel image (initmem) memory: 2048K <6>[ 10.718068] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 10.828726] udevd[76]: starting version 3.2.9 <5>[ 15.954617] random: crng init done <27>[ 15.965709] udevd[76]: specified user 'tss' unknown <27>[ 15.971047] udevd[76]: specified group 'tss' unknown <30>[ 15.979170] udevd[77]: starting eudev-3.2.9 <6>[ 17.010494] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 17.017288] imx-ipuv3 2800000.ipu: IPUv3H probed <6>[ 17.038621] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 17.105779] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 17.115479] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 17.137113] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) <6>[ 17.145121] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 17.184782] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 17.229654] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 17.236054] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 17.324298] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 0 <4>[ 17.339296] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW <6>[ 17.413533] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 17.422125] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 17.430712] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <6>[ 17.439264] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <6>[ 17.447777] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) <6>[ 17.648575] caam 2100000.crypto: Entropy delay = 3200 <6>[ 17.666409] caam 2100000.crypto: Instantiated RNG4 SH0 <6>[ 17.678886] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 17.684295] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) <6>[ 17.691189] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 17.719809] [drm] Initialized imx-drm 1.0.0 for display-subsystem on minor 1 <6>[ 17.727221] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 17.737182] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 17.839952] usbcore: registered new device driver onboard-usb-dev <4>[ 17.900796] onboard-usb-dev 2184200.usb:usb-port@1: supply vdd not found, using dummy regulator <6>[ 18.274646] usb 1-1: new high-speed USB device number 6 using ci_hdrc <6>[ 18.447774] hub 1-1:1.0: USB hub found <6>[ 18.456167] hub 1-1:1.0: 4 ports detected <6>[ 18.684373] caam algorithms registered in /proc/crypto <6>[ 18.689930] caam 2100000.crypto: registering rng-caam <6>[ 18.701875] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL <6>[ 18.774653] usb 1-1.3: new high-speed USB device number 7 using ci_hdrc Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-931486/environment . /lava-931486/environment / # /lava-931486/bin/lava-test-runner /lava-931486/0 /lava-931486/bin/lava-test-runner /lava-931486/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-931486/0/tests/0_dmesg + cat uuid +<8>[ 19.383930] UUID=931486_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 19.421234] <8>[ 19.454855] <8>[ 19.488373] + set +x <8>[ 19.498070] / #