Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.6.14 (789 ms) => setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 => tftp 0x12000000 915590/tftp-deploy-jhocpw46/kernel/zImage tftp 0x12000000 915590/tftp-deploy-jhocpw46/kernel/zImage Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '915590/tftp-deploy-jhocpw46/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 8.5 MiB/s done Bytes transferred = 11440640 (ae9200 hex) => tftp 0x13000000 915590/tftp-deploy-jhocpw46/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 915590/tftp-deploy-jhocpw46/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '915590/tftp-deploy-jhocpw46/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 7.5 MiB/s done Bytes transferred = 17969365 (11230d5 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 915590/tftp-deploy-jhocpw46/dtb/imx6dl-udoo.dtb tftp 0x18000000 915590/tftp-deploy-jhocpw46/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '915590/tftp-deploy-jhocpw46/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 5.6 MiB/s done Bytes transferred = 35145 (8949 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0xae9200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17969301 Bytes = 17.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b948 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc5 (KernelCI@build-j357818-arm-gcc-12-multi-v7-defconfig-df9q8) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 31 00:13:20 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: legacy bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s40844 r8192 d20596 u69632 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008439] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021792] Console: colour dummy device 80x30 <6>[ 0.023714] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.034117] CPU: Testing write buffer coherency: ok <6>[ 0.039243] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.044537] pid_max: default: 32768 minimum: 301 <6>[ 0.049568] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.057002] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.065928] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.072250] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.079201] rcu: Hierarchical SRCU implementation. <6>[ 0.082730] rcu: Max phase no-delay instances is 1000. <6>[ 0.088655] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.099369] EFI services will not be available. <6>[ 0.101616] smp: Bringing up secondary CPUs ... <6>[ 0.107246] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.107270] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.117561] smp: Brought up 1 node, 2 CPUs <6>[ 0.121705] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.128172] CPU: All CPU(s) started in SVC mode. <6>[ 0.133554] Memory: 923708K/1048576K available (16384K kernel code, 2543K rwdata, 6788K rodata, 2048K init, 430K bss, 56440K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.149310] devtmpfs: initialized <6>[ 0.159417] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.164760] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.174683] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.184806] pinctrl core: initialized pinctrl subsystem <6>[ 0.190805] DMI not present or invalid. <6>[ 0.193046] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.200653] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.208381] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.208474] cpuidle: using governor menu <6>[ 0.216447] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.230096] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.236456] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <4>[ 0.252386] mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator <4>[ 0.258226] mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator <6>[ 0.267818] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.276774] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.285275] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.300895] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.307766] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.317329] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.325026] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.332796] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux <6>[ 0.343403] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux <6>[ 0.357423] No ATAGs? <6>[ 0.357582] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.365374] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.374233] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.385701] Serial: AMBA PL011 UART driver <4>[ 0.408739] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.417182] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.426174] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.435205] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.444476] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.453552] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.462770] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.544788] iommu: Default domain type: Translated <6>[ 0.547048] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.563924] SCSI subsystem initialized <6>[ 0.566049] usbcore: registered new interface driver usbfs <6>[ 0.570872] usbcore: registered new interface driver hub <6>[ 0.576495] usbcore: registered new device driver usb <4>[ 0.581981] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 0.591230] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 0.602072] i2c i2c-1: IMX I2C adapter registered <6>[ 0.605988] i2c i2c-2: IMX I2C adapter registered <6>[ 0.611437] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.615464] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.624919] PTP clock support registered <6>[ 0.629282] EDAC MC: Ver: 3.0.0 <6>[ 0.632957] scmi_core: SCMI protocol bus registered <6>[ 0.640618] vgaarb: loaded <6>[ 0.655371] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.696527] NET: Registered PF_INET protocol family <6>[ 0.699078] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.708347] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.715108] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.723149] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.731186] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.738828] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.745304] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.752102] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.759575] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.766191] RPC: Registered named UNIX socket transport module. <6>[ 0.771470] RPC: Registered udp transport module. <6>[ 0.776478] RPC: Registered tcp transport module. <6>[ 0.781388] RPC: Registered tcp-with-tls transport module. <6>[ 0.787146] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.793840] PCI: CLS 0 bytes, default 64 <5>[ 0.799786] Initialise system trusted keyrings <6>[ 0.803361] Trying to unpack rootfs image as initramfs... <6>[ 0.836407] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 0.840715] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.866283] NFS: Registering the id_resolver key type <5>[ 0.868807] Key type id_resolver registered <5>[ 0.873201] Key type id_legacy registered <6>[ 0.877564] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.884425] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.916001] Key type asymmetric registered <5>[ 0.917523] Asymmetric key parser 'x509' registered <6>[ 0.922741] bounce: pool size: 64 pages <6>[ 0.926859] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.934402] io scheduler mq-deadline registered <6>[ 0.939206] io scheduler kyber registered <6>[ 0.943478] io scheduler bfq registered <6>[ 0.989815] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.041387] mxs-dma 110000.dma-controller: initialized <6>[ 1.186555] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.197933] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 267, base_baud = 5000000) is a IMX <6>[ 1.204103] printk: legacy console [ttymxc1] enabled <6>[ 1.204103] printk: legacy console [ttymxc1] enabled <6>[ 1.214550] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.214550] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.227511] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 268, base_baud = 5000000) is a IMX <6>[ 1.239674] msm_serial: driver initialized <6>[ 1.244756] SuperH (H)SCI(F) driver initialized <6>[ 1.250200] STMicroelectronics ASC driver initialized <6>[ 1.255782] STM32 USART driver initialized <6>[ 1.284032] brd: module loaded <6>[ 1.295027] loop: module loaded <6>[ 1.317169] CAN device driver interface <6>[ 1.322803] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.330865] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.336150] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.342422] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.348124] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.361066] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.367049] usbcore: registered new interface driver pegasus <6>[ 1.373026] usbcore: registered new interface driver asix <6>[ 1.378792] usbcore: registered new interface driver ax88179_178a <6>[ 1.385232] usbcore: registered new interface driver cdc_ether <6>[ 1.391434] usbcore: registered new interface driver smsc75xx <6>[ 1.397530] usbcore: registered new interface driver smsc95xx <6>[ 1.403603] usbcore: registered new interface driver net1080 <6>[ 1.409615] usbcore: registered new interface driver cdc_subset <6>[ 1.415914] usbcore: registered new interface driver zaurus <6>[ 1.421818] usbcore: registered new interface driver cdc_ncm <6>[ 1.434426] usbcore: registered new interface driver usb-storage <4>[ 1.443253] imx_usb 2184000.usb: No over current polarity defined <3>[ 2.297576] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 2.305084] imx_usb 2184200.usb: No over current polarity defined <6>[ 2.316225] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 2.321428] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 2.355452] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 2.362306] hub 1-0:1.0: USB hub found <6>[ 2.366514] hub 1-0:1.0: 1 port detected <6>[ 2.382040] i2c_dev: i2c /dev entries driver <6>[ 2.413375] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.419934] sdhci: Copyright(c) Pierre Ossman <6>[ 2.427966] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.437260] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.451170] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 2.457956] usbcore: registered new interface driver usbhid <6>[ 2.463817] usbhid: USB HID core driver <4>[ 2.476563] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. <6>[ 2.486135] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 (8000003f) counters available <6>[ 2.500189] NET: Registered PF_INET6 protocol family <6>[ 2.507424] Segment Routing with IPv6 <6>[ 2.511477] In-situ OAM (IOAM) with IPv6 <6>[ 2.515871] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.522884] NET: Registered PF_PACKET protocol family <6>[ 2.528281] can: controller area network core <6>[ 2.532994] NET: Registered PF_CAN protocol family <6>[ 2.538122] can: raw protocol <6>[ 2.541386] can: broadcast manager protocol <6>[ 2.545886] can: netlink gateway - max_hops=1 <5>[ 2.551405] Key type dns_resolver registered <6>[ 2.557874] Freeing initrd memory: 17552K <6>[ 2.558403] ThumbEE CPU extension supported. <5>[ 2.566846] Registering SWP/SWPB emulation handler <6>[ 2.572413] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <5>[ 2.590467] Loading compiled-in X.509 certificates <6>[ 2.612756] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 2.619740] pps pps0: new PPS source ptp0 <6>[ 2.635466] usb 1-1: new full-speed USB device number 2 using ci_hdrc <6>[ 2.659488] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 2.668800] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <4>[ 2.687405] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 2.697810] mmc2: new high speed SDXC card at address 59b4 <6>[ 2.704428] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 2.712375] mmcblk2: p1 p2 <6>[ 2.758812] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <3>[ 2.875423] usb 1-1: device descriptor read/64, error -71 <3>[ 3.205509] usb 1-1: device descriptor read/64, error -71 <6>[ 3.445485] usb 1-1: new full-speed USB device number 3 using ci_hdrc <3>[ 3.675412] usb 1-1: device descriptor read/64, error -71 <3>[ 4.005458] usb 1-1: device descriptor read/64, error -71 <6>[ 4.115493] usb usb1-port1: attempt power cycle <6>[ 4.535413] usb 1-1: new full-speed USB device number 4 using ci_hdrc <3>[ 5.015421] usb 1-1: device not accepting address 4, error -71 <6>[ 5.145494] usb 1-1: new full-speed USB device number 5 using ci_hdrc <3>[ 5.625464] usb 1-1: device not accepting address 5, error -71 <3>[ 5.631754] usb usb1-port1: unable to enumerate USB device <6>[ 5.856148] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <5>[ 5.885395] Sending DHCP requests ., OK <6>[ 5.929770] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.14 <6>[ 5.937820] IP-Config: Complete: <6>[ 5.941332] device=eth0, hwaddr=00:c0:08:88:29:80, ipaddr=192.168.6.14, mask=255.255.255.0, gw=192.168.6.1 <6>[ 5.951789] host=192.168.6.14, domain=, nis-domain=(none) <6>[ 5.957951] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 5.957974] nameserver0=10.255.253.1 <6>[ 5.969929] clk: Disabling unused clocks <6>[ 5.974578] PM: genpd: Disabling unused power domains <6>[ 5.984206] Freeing unused kernel image (initmem) memory: 2048K <6>[ 5.991072] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.142019] udevd[92]: starting version 3.2.9 <5>[ 11.645369] random: crng init done <27>[ 11.657131] udevd[92]: specified user 'tss' unknown <27>[ 11.662509] udevd[92]: specified group 'tss' unknown <30>[ 11.671161] udevd[93]: starting eudev-3.2.9 <6>[ 12.273593] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 12.311746] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) <6>[ 12.383198] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 12.391982] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 12.400647] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) <6>[ 12.411684] [drm] Initialized imx-drm 1.0.0 for display-subsystem on minor 0 <6>[ 12.419226] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 12.435026] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 12.465988] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <4>[ 12.523492] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW <6>[ 12.607697] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 12.620851] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 <6>[ 12.667990] caam 2100000.crypto: Entropy delay = 3200 <6>[ 12.685832] caam 2100000.crypto: Instantiated RNG4 SH0 <6>[ 12.698309] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 12.703735] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) <6>[ 12.710648] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 12.721719] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 12.729144] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 1 <6>[ 12.818646] usbcore: registered new device driver onboard-usb-dev <4>[ 12.880364] onboard-usb-dev 2184200.usb:usb-port@1: supply vdd not found, using dummy regulator <6>[ 13.256334] usb 1-1: new high-speed USB device number 6 using ci_hdrc <6>[ 13.446813] hub 1-1:1.0: USB hub found <6>[ 13.451069] hub 1-1:1.0: 4 ports detected <6>[ 13.456310] caam algorithms registered in /proc/crypto <6>[ 13.461928] caam 2100000.crypto: registering rng-caam <6>[ 13.468268] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # <6>[ 13.765430] usb 1-1.3: new high-speed USB device number 7 using ci_hdrc # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-915590/environment . /lava-915590/environment / # /lava-915590/bin/lava-test-runner /lava-915590/0 /lava-915590/bin/lava-test-runner /lava-915590/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-915590/0/tests/0_dmesg + cat uuid + UUID=915590_1.5.2.4.1 <8>[ 14.227774] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.280780] <8>[ 14.320895] <8>[ 14.367177] + set +x <8>[ 14.377821] / #