Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. RomBOOT AT91Bootstrap 3.7.2-rc2-dirty (Tue 14 Apr 02:17:07 BST 2015) NAND: ONFI not supported NAND: Manufacturer ID: 0xec Chip ID: 0xda NAND: Disable On-Die ECC NAND: Press the recovery button (BP4) to recovery NAND: Using Software ECC NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x21f00000 NAND: Done to load image U-Boot 2015.01 (Apr 14 2015 - 16:45:04) CPU: AT91SAM9G20 Crystal frequency: 18.432 MHz CPU clock : 396.288 MHz Master clock : 132.096 MHz DRAM: 64 MiB WARNING: Caches not enabled NAND: 256 MiB MMC: mci: 0 In: serial Out: serial Err: serial Net: macb0 Hit any key to stop autoboot: 3  0 U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp macb0: Starting autonegotiation... macb0: Autonegotiation complete macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) BOOTP broadcast 1 BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.28 (335 ms) U-Boot> setenv serverip 192.168.56.218 setenv serverip 192.168.56.218 U-Boot> tftp 0x22100000 949072/tftp-deploy-wvjjl174/kernel/zImage tftp 0x22100000 949072/tftp-deploy-wvjjl174/kernel/zImage macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.218; our IP address is 192.168.56.28 Filename '949072/tftp-deploy-wvjjl174/kernel/zImage'. Load address: 0x22100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 1.2 MiB/s done Bytes transferred = 7340376 (700158 hex) U-Boot> tftp 0x23000000 949072/tftp-deploy-wvjjl174/ramdisk/ramdisk.cpio.gz.uboot tftp 0x23000000 949072/tftp-deploy-wvjjl174/ramdisk/ramdisk.cpio.gz.uboot macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.218; our IP address is 192.168.56.28 Filename '949072/tftp-deploy-wvjjl174/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x23000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########## 1.2 MiB/s done Bytes transferred = 5859791 (5969cf hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x22000000 949072/tftp-deploy-wvjjl174/dtb/at91sam9g20ek.dtb tftp 0x22000000 949072/tftp-deploy-wvjjl174/dtb/at91sam9g20ek.dtb macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.218; our IP address is 192.168.56.28 Filename '949072/tftp-deploy-wvjjl174/dtb/at91sam9g20ek.dtb'. Load address: 0x22000000 Loading: *## 1.2 MiB/s done Bytes transferred = 17128 (42e8 hex) U-Boot> setenv bootargs ' root=/dev/nfs rw nfsroot=192.168.56.218:/var/lib/lava/dispatcher/tmp/949072/extract-nfsrootfs-f0oesovf,tcp,hard,vers=3 cma=0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs ' root=/dev/nfs rw nfsroot=192.168.56.218:/var/lib/lava/dispatcher/tmp/949072/extract-nfsrootfs-f0oesovf,tcp,hard,vers=3 cma=0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x22100000 0x23000000 0x22000000 bootz 0x22100000 0x23000000 0x22000000 Kernel image @ 0x22100000 [ 0x000000 - 0x700158 ] ## Loading init Ramdisk from Legacy Image at 23000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 5859727 Bytes = 5.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 22000000 Booting using the fdt blob at 0x22000000 Using Device Tree in place at 22000000, end 220072e7 Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 6.12.0-rc6 (KernelCI@build-j365596-arm-gcc-12-multi-v5-defconfig-xh59h) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 PREEMPT Wed Nov 6 21:28:47 UTC 2024 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f CPU: VIVT data cache, VIVT instruction cache OF: fdt: Machine model: Atmel at91sam9g20ek earlycon: atmel_serial0 at MMIO 0xfffff200 (options '115200n8') printk: legacy bootconsole [atmel_serial0] enabled Memory policy: Data cache writethrough Zone ranges: DMA [mem 0x0000000020000000-0x0000000023ffffff] Normal empty HighMem empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000020000000-0x0000000023ffffff] Initmem setup node 0 [mem 0x0000000020000000-0x0000000023ffffff] Kernel command line: root=/dev/nfs rw nfsroot=192.168.56.218:/var/lib/lava/dispatcher/tmp/949072/extract-nfsrootfs-f0oesovf,tcp,hard,vers=3 cma=0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>Built 1 zonelists, mobility grouping on. Total pages: 16384 <6>mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>rcu: Preemptible hierarchical RCU implementation. <6>rcu: RCU event tracing is enabled. <6> Trampoline variant of Tasks RCU enabled. <6>rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14468723050 ns <6>clocksource: timer@fffa0000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 115749784805 ns <6>sched_clock: 32 bits at 17MHz, resolution 60ns, wraps every 130055938017ns <6>Switching to timer-based delay loop, resolution 60ns <6>Console: colour dummy device 80x30 <6>printk: legacy console [tty0] enabled <6>printk: legacy bootconsole [atmel_serial0] disabled <6>Booting Linux on physical CPU 0x0 <5>Linux version 6.12.0-rc6 (KernelCI@build-j365596-arm-gcc-12-multi-v5-defconfig-xh59h) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 PREEMPT Wed Nov 6 21:28:47 UTC 2024 <6>CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f <6>CPU: VIVT data cache, VIVT instruction cache <6>OF: fdt: Machine model: Atmel at91sam9g20ek <6>earlycon: atmel_serial0 at MMIO 0xfffff200 (options '115200n8') <6>printk: legacy bootconsole [atmel_serial0] enabled <6>Memory policy: Data cache writethrough <6>Zone ranges: <6> DMA [mem 0x0000000020000000-0x0000000023ffffff] <6> Normal empty <6> HighMem empty <6>Movable zone start for each node <6>Early memory node ranges <6> node 0: [mem 0x0000000020000000-0x0000000023ffffff] <6>Initmem setup node 0 [mem 0x0000000020000000-0x0000000023ffffff] <5>Kernel command line: root=/dev/nfs rw nfsroot=192.168.56.218:/var/lib/lava/dispatcher/tmp/949072/extract-nfsrootfs-f0oesovf,tcp,hard,vers=3 cma=0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>Built 1 zonelists, mobility grouping on. Total pages: 16384 <6>mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>rcu: Preemptible hierarchical RCU implementation. <6>rcu: RCU event tracing is enabled. <6> Trampoline variant of Tasks RCU enabled. <6>rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14468723050 ns <6>clocksource: timer@fffa0000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 115749784805 ns <6>sched_clock: 32 bits at 17MHz, resolution 60ns, wraps every 130055938017ns <6>Switching to timer-based delay loop, resolution 60ns <6>Console: colour dummy device 80x30 <6>printk: legacy console [tty0] enabled <6>printk: legacy bootconsole [atmel_serial0] disabled <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 33.02 BogoMIPS (lpj=165120) <6>CPU: Testing write buffer coherency: ok <6>pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>Setting up static identity map for 0x20008400 - 0x2000847c <6>rcu: Hierarchical SRCU implementation. <6>rcu: Max phase no-delay instances is 1000. <6>Memory: 41460K/65536K available (10852K kernel code, 1944K rwdata, 3000K rodata, 384K init, 696K bss, 23580K reserved, 0K cma-reserved, 0K highmem) <6>devtmpfs: initialized <6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>pinctrl core: initialized pinctrl subsystem <6>NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>DMA: preallocated 256 KiB pool for atomic coherent allocations <6>thermal_sys: Registered thermal governor 'step_wise' <6>cpuidle: using governor menu <6>AT91: PM: standby: standby, suspend: ulp0 <4>gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>gpio-at91 fffff400.gpio: at address (ptrval) <4>gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>gpio-at91 fffff600.gpio: at address (ptrval) <4>gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>gpio-at91 fffff800.gpio: at address (ptrval) <6>pinctrl-at91 ahb:apb:pinctrl@fffff400: initialized AT91 pinctrl driver <6>Serial: AMBA PL011 UART driver <6>kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>AT91: Detected SoC: at91sam9g20, revision 1 <5>SCSI subsystem initialized <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>mc: Linux media interface: v0.10 <6>videodev: Linux video capture interface: v2.00 <6>pps_core: LinuxPPS API ver. 1 registered <6>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>PTP clock support registered <6>Advanced Linux Sound Architecture Driver Initialized. <6>vgaarb: loaded <6>clocksource: Switched to clocksource timer@fffa0000 <6>NET: Registered PF_INET protocol family <6>IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) <6>tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) <6>TCP: Hash tables configured (established 1024 bind 1024) <6>UDP hash table entries: 256 (order: 0, 4096 bytes, linear) <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) <6>NET: Registered PF_UNIX/PF_LOCAL protocol family <6>RPC: Registered named UNIX socket transport module. <6>RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. <6>RPC: Registered tcp-with-tls transport module. <6>RPC: Registered tcp NFSv4.1 backchannel transport module. <6>PCI: CLS 0 bytes, default 32 <6>Unpacking initramfs... <5>Initialise system trusted keyrings <6>workingset: timestamp_bits=30 max_order=14 bucket_order=0 <6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <5>Key type asymmetric registered <5>Asymmetric key parser 'x509' registered <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) <6>io scheduler mq-deadline registered <6>io scheduler kyber registered <6>io scheduler bfq registered <6>Freeing initrd memory: 5724K <6>Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled <6>loop: module loaded <6>atmel_usart_serial.0.auto: ttyAT0 at MMIO 0xfffff200 (irq = 16, base_baud = 8256000) is a ATMEL_SERIAL <6>printk: legacy console [ttyAT0] enabled <6>atmel_usart_serial.1.auto: ttyAT1 at MMIO 0xfffb0000 (irq = 21, base_baud = 8256000) is a ATMEL_SERIAL <6>atmel_usart_serial.2.auto: ttyAT2 at MMIO 0xfffb4000 (irq = 22, base_baud = 8256000) is a ATMEL_SERIAL <6>macb fffc4000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xfffc4000 irq 23 (a6:72:4e:7e:7a:f8) <6>libertas_sdio: Libertas SDIO driver <6>libertas_sdio: Copyright Pierre Ossman <6>at91_ohci 500000.ohci: USB Host Controller <6>at91_ohci 500000.ohci: new USB bus registered, assigned bus number 1 <6>at91_ohci 500000.ohci: irq 24, io mem 0x00500000 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>usbcore: registered new interface driver usb-storage <6>usbcore: registered new interface driver ums-datafab <6>usbcore: registered new interface driver ums-freecom <6>usbcore: registered new interface driver ums-jumpshot <6>usbcore: registered new interface driver ums-sddr09 <6>usbcore: registered new interface driver ums-sddr55 <6>i2c_dev: i2c /dev entries driver <6>at91-reset fffffd00.reset-controller: Starting after regular power-up <3>at91_wdt fffffd40.watchdog: watchdog is disabled <3>at91_wdt fffffd40.watchdog: probe with driver at91_wdt failed with error -22 <6>slot@1 enforce active low on GPIO handle <6>atmel_mci fffa8000.mmc: version: 0x210 <6>usbcore: registered new interface driver usbhid <6>atmel_mci fffa8000.mmc: using PDC <6>usbhid: USB HID core driver <6>nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda <6>nand: Samsung NAND 256MiB 3,3V 8-bit <6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 <6>Bad block table found at page 131008, version 0x01 <6>Bad block table found at page 130944, version 0x01 <6>atmel_mci fffa8000.mmc: Atmel MCI controller at 0xfffa8000 irq 25, 1 slots <6>nand_read_bbt: bad block at 0x000006120000 <6>nand_read_bbt: bad block at 0x00000d880000 <5>8 fixed-partitions partitions found on MTD device atmel_nand <5>Creating 8 MTD partitions on "atmel_nand": <5>0x000000000000-0x000000020000 : "at91bootstrap" <5>0x000000020000-0x000000060000 : "barebox" <5>0x000000060000-0x000000080000 : "bareboxenv" <5>0x000000080000-0x0000000a0000 : "bareboxenv2" <5>0x0000000a0000-0x0000000c0000 : "oftree" <5>0x0000000c0000-0x0000004c0000 : "kernel" <5>0x0000004c0000-0x000007cc0000 : "rootfs" <5>0x000007cc0000-0x000010000000 : "data" <6>NET: Registered PF_INET6 protocol family <6>Segment Routing with IPv6 <6>In-situ OAM (IOAM) with IPv6 <6>sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>NET: Registered PF_PACKET protocol family <6>lib80211: common routines for IEEE802.11 drivers <5>Loading compiled-in X.509 certificates <6>input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>macb fffc4000.ethernet eth0: PHY [fffc4000.ethernet-ffffffff:00] driver [Davicom DM9161A] (irq=POLL) <6>macb fffc4000.ethernet eth0: configuring for phy/rmii link mode <6>macb fffc4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <5>Sending DHCP requests .., OK <6>IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.28 <6>IP-Config: Complete: <6> device=eth0, hwaddr=a6:72:4e:7e:7a:f8, ipaddr=192.168.56.28, mask=255.255.255.0, gw=192.168.56.254 <6> host=192.168.56.28, domain=mayfield.sirena.org.uk, nis-domain=(none) <6> bootserver=192.168.56.254, rootserver=192.168.56.218, rootpath= <6> nameserver0=192.168.56.254 <6> ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <5>cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>clk: Disabling unused clocks <6>PM: genpd: Disabling unused power domains <6>ALSA device list: <6>cfg80211: failed to load regulatory.db <6> No soundcards found. <6>Freeing unused kernel image (initmem) memory: 384K <4>Kernel memory protection not selected by kernel config. <6>Run /init as init process Loading, please wait... Starting systemd-udevd version 252.22-1~deb12u1 <4>mtdblock: MTD device 'at91bootstrap' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'bareboxenv2' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'barebox' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'bareboxenv' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'oftree' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'kernel' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'data' is NAND, please consider using UBI block devices instead. <6>udc: at91_udc version 3 May 2006 <6>ssc fffbc000.ssc: Atmel SSC device at 0x(ptrval) (irq 31) <6>iio iio:device0: Resolution used: 10 bits <4>rtc-at91sam9 fffffd20.rtc: rtc0: SET TIME! <6>rtc-at91sam9 fffffd20.rtc: registered as rtc0 <3>rtc-at91sam9 fffffd20.rtc: hctosys: unable to read the hardware clock <6>at24 1-0050: 65536 byte 24c512 EEPROM, writable, 1 bytes/write <6>i2c-gpio i2c-gpio-0: using lines 23 (SDA) and 24 (SCL) <3>debugfs: Directory 'fffbc000.ssc' with parent 'wm8731 @ AT91SAMG20EK' already present! <3>at91sam9g20ek-audio sound: ASoC: driver name too long 'wm8731 @ AT91SAMG20EK' -> 'wm8731___AT91SA' Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device /sys/class/net/eth0 found done. Begin: Waiting up to 180 secs for any network device to become available ... done. IP-Config: eth0 hardware address a6:72:4e:7e:7a:f8 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.56.254): address: 192.168.56.28 broadcast: 192.168.56.255 netmask: 255.255.255.0 gateway: 192.168.56.254 dns0 : 192.168.56.254 dns1 : 0.0.0.0 domain : mayfield.sirena.org.uk rootserver: 192.168.56.254 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... done. <30>systemd[1]: System time before build time, advancing clock. <27>systemd[1]: Failed to find module 'autofs4' <30>systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <30>systemd[1]: Detected architecture arm. Welcome to [1mDebian GNU/Linux 12 (bookworm)[0m! <30>systemd[1]: Hostname set to . <5>random: crng init done <30>systemd[1]: Queued start job for default target graphical.target. <30>systemd[1]: Created slice system-getty.slice - Slice /system/getty. [[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0m - Slice /system/getty. <30>systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [[0;32m OK [0m] Created slice [0;1;39msystem-modpr…lice[0m - Slice /system/modprobe. <30>systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [[0;32m OK [0m] Created slice [0;1;39msystem-seria…[0m - Slice /system/serial-getty. <30>systemd[1]: Created slice user.slice - User and Session Slice. [[0;32m OK [0m] Created slice [0;1;39muser.slice[0m - User and Session Slice. <30>systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39msystemd-ask-passwo…quests to Console Directory Watch. <30>systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [[0;32m OK [0m] Started [0;1;39msystemd-ask-passwo… Requests to Wall Directory Watch. <30>systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). <30>systemd[1]: Expecting device dev-ttyAT0.device - /dev/ttyAT0... Expecting device [0;1;39mdev-ttyAT0.device[0m - /dev/ttyAT0... <30>systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39mcryptsetup.…get[0m - Local Encrypted Volumes. <30>systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [[0;32m OK [0m] Reached target [0;1;39mintegrityse…Local Integrity Protected Volumes. <30>systemd[1]: Reached target paths.target - Path Units. [[0;32m OK [0m] Reached target [0;1;39mpaths.target[0m - Path Units. <30>systemd[1]: Reached target remote-fs.target - Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mremote-fs.target[0m - Remote File Systems. <30>systemd[1]: Reached target slices.target - Slice Units. [[0;32m OK [0m] Reached target [0;1;39mslices.target[0m - Slice Units. <30>systemd[1]: Reached target swap.target - Swaps. [[0;32m OK [0m] Reached target [0;1;39mswap.target[0m - Swaps. <30>systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [[0;32m OK [0m] Reached target [0;1;39mveritysetup… - Local Verity Protected Volumes. <30>systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on [0;1;39msystemd-initc… initctl Compatibility Named Pipe. <30>systemd[1]: systemd-journald-audit.socket - Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit). <30>systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;39msystemd-journ…t[0m - Journal Socket (/dev/log). <30>systemd[1]: Listening on systemd-journald.socket - Journal Socket. [[0;32m OK [0m] Listening on [0;1;39msystemd-journald.socket[0m - Journal Socket. <30>systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. [[0;32m OK [0m] Listening on [0;1;39msystemd-netwo… - Network Service Netlink Socket. <30>systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [[0;32m OK [0m] Listening on [0;1;39msystemd-udevd….socket[0m - udev Control Socket. <30>systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [[0;32m OK [0m] Listening on [0;1;39msystemd-udevd…l.socket[0m - udev Kernel Socket. <30>systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). <30>systemd[1]: dev-mqueue.mount - POSIX Message Queue File System was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/mqueue). <30>systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... Mounting [0;1;39msys-kernel-debug.…[0m - Kernel Debug File System... <30>systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). <30>systemd[1]: kmod-static-nodes.service - Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.12.0-rc6/modules.devname). <30>systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... Starting [0;1;39mmodprobe@configfs…m - Load Kernel Module configfs... <30>systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... Starting [0;1;39mmodprobe@dm_mod.s…[0m - Load Kernel Module dm_mod... <30>systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... Starting [0;1;39mmodprobe@drm.service[0m - Load Kernel Module drm... <30>systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... Starting [0;1;39mmodprobe@efi_psto…- Load Kernel Module efi_pstore... <30>systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... Starting [0;1;39mmodprobe@fuse.ser…e[0m - Load Kernel Module fuse... <30>systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... Starting [0;1;39mmodprobe@loop.ser…e[0m - Load Kernel Module loop... <28>systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <28>systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <30>systemd[1]: Starting systemd-journald.service - Journal Service... Starting [0;1;39msystemd-journald.service[0m - Journal Service... <30>systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... Starting [0;1;39msystemd-modules-l…rvice[0m - Load Kernel Modules... <30>systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... Starting [0;1;39msystemd-network-g… units from Kernel command line... <30>systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... Starting [0;1;39msystemd-remount-f…nt Root and Kernel File Systems... <30>systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... Starting [0;1;39msystemd-udev-trig…[0m - Coldplug All udev Devices... <30>systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [[0;32m OK [0m] Mounted [0;1;39msys-kernel-debug.m…nt[0m - Kernel Debug File System. <30>systemd[1]: modprobe@configfs.service: Deactivated successfully. <30>systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [[0;32m OK [0m] Finished [0;1;39mmodprobe@configfs…[0m - Load Kernel Module configfs. <30>systemd[1]: modprobe@dm_mod.service: Deactivated successfully. <30>systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [[0;32m OK [0m] Finished [0;1;39mmodprobe@dm_mod.s…e[0m - Load Kernel Module dm_mod. <30>systemd[1]: modprobe@drm.service: Deactivated successfully. <30>systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [[0;32m OK [0m] Finished [0;1;39mmodprobe@drm.service[0m - Load Kernel Module drm. <30>systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. <30>systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [[0;32m OK [0m] Finished [0;1;39mmodprobe@efi_psto…m - Load Kernel Module efi_pstore. <30>systemd[1]: modprobe@fuse.service: Deactivated successfully. <30>systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [[0;32m OK [0m] Finished [0;1;39mmodprobe@fuse.service[0m - Load Kernel Module fuse. <30>systemd[1]: modprobe@loop.service: Deactivated successfully. <30>systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [[0;32m OK [0m] Finished [0;1;39mmodprobe@loop.service[0m - Load Kernel Module loop. <30>systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [[0;32m OK [0m] Finished [0;1;39msystemd-modules-l…service[0m - Load Kernel Modules. <30>systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel command line. [[0;32m OK [0m] Finished [0;1;39msystemd-network-g…rk units from Kernel command line. <30>systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [[0;32m OK [0m] Finished [0;1;39msystemd-remount-f…ount Root and Kernel File Systems. <30>systemd[1]: Reached target network-pre.target - Preparation for Network. [[0;32m OK [0m] Reached target [0;1;39mnetwork-pre…get[0m - Preparation for Network. <30>systemd[1]: sys-fs-fuse-connections.mount - FUSE Control File System was skipped because of an unmet condition check (ConditionPathExists=/sys/fs/fuse/connections). <30>systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... Mounting [0;1;39msys-kernel-config…ernel Configuration File System... <30>systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). <30>systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). <30>systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... Starting [0;1;39msystemd-random-se…ice[0m - Load/Save Random Seed... <30>systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. <30>systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... Starting [0;1;39msystemd-sysctl.se…ce[0m - Apply Kernel Variables... <30>systemd[1]: Starting systemd-sysusers.service - Create System Users... Starting [0;1;39msystemd-sysusers.…rvice[0m - Create System Users... <30>systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [[0;32m OK [0m] Mounted [0;1;39msys-kernel-config.… Kernel Configuration File System. <30>systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [[0;32m OK [0m] Finished [0;1;39msystemd-random-se…rvice[0m - Load/Save Random Seed. <30>systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). <30>systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [[0;32m OK [0m] Finished [0;1;39msystemd-sysctl.service[0m - Apply Kernel Variables. <30>systemd[1]: Started systemd-journald.service - Journal Service. [[0;32m OK [0m] Started [0;1;39msystemd-journald.service[0m - Journal Service. Starting [0;1;39msystemd-journal-f…h Journal to Persistent Storage... [[0;32m OK [0m] Finished [0;1;39msystemd-sysusers.service[0m - Create System Users. Starting [0;1;39msystemd-tmpfiles-…ate Static Device Nodes in /dev... <46>systemd-journald[130]: Received client request to flush runtime journal. [[0m[0;31m* [0m] (1 of 4) Job dev-ttyAT0.device/start running (8s / 1min 30s) M [K[[0;1;31m*[0m[0;31m* [0m] (1 of 4) Job dev-ttyAT0.device/start running (8s / 1min 30s) M [K[[0;32m OK [0m] Finished [0;1;39msystemd-tmpfiles-…reate Static Device Nodes in /dev. [K[[0;32m OK [0m] Reached target [0;1;39mlocal-fs-pr…reparation for Local File Systems. [[0;32m OK [0m] Reached target [0;1;39mlocal-fs.target[0m - Local File Systems. Starting [0;1;39msystemd-udevd.ser…ger for Device Events and Files... [[0;32m OK [0m] Finished [0;1;39msystemd-journal-f…ush Journal to Persistent Storage. Starting [0;1;39msystemd-tmpfiles-… Volatile Files and Directories... [[0;32m OK [0m] Finished [0;1;39msystemd-udev-trig…e[0m - Coldplug All udev Devices. [[0;32m OK [0m] Started [0;1;39msystemd-udevd.serv…nager for Device Events and Files. Starting [0;1;39msystemd-networkd.…ice[0m - Network Configuration... <4>mtdblock: MTD device 'barebox' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'at91bootstrap' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'bareboxenv' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'kernel' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'bareboxenv2' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'data' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. <4>mtdblock: MTD device 'oftree' is NAND, please consider using UBI block devices instead. [[0;32m OK [0m] Finished [0;1;39msystemd-tmpfiles-…te Volatile Files and Directories. [[0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) Job dev-ttyAT0.device/start running (18s / 1min 30s) M [K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) Job systemd-networkd.service/start running (18s / 1min 42s) M [K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) Job systemd-networkd.service/start running (19s / 1min 42s) M [K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) Job systemd-networkd.service/start running (20s / 1min 42s) M [K[[0;32m OK [0m] Started [0;1;39msystemd-networkd.service[0m - Network Configuration. [K[[0;32m OK [0m] Found device [0;1;39mdev-ttyAT0.device[0m - /dev/ttyAT0. [[0;32m OK [0m] Reached target [0;1;39mnetwork.target[0m - Network. [[0;32m OK [0m] Reached target [0;1;39msound.target[0m - Sound Card. [[0;32m OK [0m] Reached target [0;1;39musb-gadget.…m - Hardware activated USB gadget. Starting [0;1;39msystemd-timesyncd… - Network Time Synchronization... Starting [0;1;39msystemd-update-ut…rd System Boot/Shutdown in UTMP... [[0;32m OK [0m] Finished [0;1;39msystemd-update-ut…cord System Boot/Shutdown in UTMP. [[0;32m OK [0m] Started [0;1;39msystemd-timesyncd.…0m - Network Time Synchronization. [[0;32m OK [0m] Reached target [0;1;39msysinit.target[0m - System Initialization. [[0;32m OK [0m] Started [0;1;39msystemd-tmpfiles-c… Cleanup of Temporary Directories. [[0;32m OK [0m] Reached target [0;1;39mtime-set.target[0m - System Time Set. [[0;32m OK [0m] Started [0;1;39mapt-daily.timer[0m - Daily apt download activities. [[0;32m OK [0m] Started [0;1;39mapt-daily-upgrade.… apt upgrade and clean activities. [[0;32m OK [0m] Started [0;1;39mdpkg-db-backup.tim… Daily dpkg database backup timer. [[0;32m OK [0m] Started [0;1;39me2scrub_all.timer…etadata Check for All Filesystems. [[0;32m OK [0m] Started [0;1;39mfstrim.timer[0m - Discard unused blocks once a week. [[0;32m OK [0m] Reached target [0;1;39mtimers.target[0m - Timer Units. [[0;32m OK [0m] Listening on [0;1;39mdbus.socket[…- D-Bus System Message Bus Socket. [[0;32m OK [0m] Reached target [0;1;39msockets.target[0m - Socket Units. [[0;32m OK [0m] Reached target [0;1;39mbasic.target[0m - Basic System. Starting [0;1;39mdbus.service[0m - D-Bus System Message Bus... Starting [0;1;39me2scrub_reap.serv…e ext4 Metadata Check Snapshots... Starting [0;1;39msystemd-logind.se…ice[0m - User Login Management... Starting [0;1;39msystemd-user-sess…vice[0m - Permit User Sessions... [[0;32m OK [0m] Finished [0;1;39msystemd-user-sess…ervice[0m - Permit User Sessions. [[0;32m OK [0m] Started [0;1;39mgetty@tty1.service[0m - Getty on tty1. [[0;32m OK [0m] Started [0;1;39mserial-getty@ttyAT…vice[0m - Serial Getty on ttyAT0. [[0;32m OK [0m] Reached target [0;1;39mgetty.target[0m - Login Prompts. [[0;32m OK [0m] Started [0;1;39mdbus.service[0m - D-Bus System Message Bus. Starting [0;1;39msystemd-hostnamed.service[0m - Hostname Service... [[0;32m OK [0m] Started [0;1;39msystemd-logind.service[0m - User Login Management. [[0;32m OK [0m] Started [0;1;39msystemd-hostnamed.service[0m - Hostname Service. [[0;32m OK [0m] Finished [0;1;39me2scrub_reap.serv…ine ext4 Metadata Check Snapshots. [[0;32m OK [0m] Reached target [0;1;39mmulti-user.target[0m - Multi-User System. [[0;32m OK [0m] Reached target [0;1;39mgraphical.target[0m - Graphical Interface. Starting [0;1;39msystemd-update-ut… Record Runlevel Change in UTMP... [[0;32m OK [0m] Finished [0;1;39msystemd-update-ut… - Record Runlevel Change in UTMP. Debian GNU/Linux 12 debian-bookworm-armel ttyAT0 debian-bookworm-armel login: root (automatic login) Linux debian-bookworm-armel 6.12.0-rc6 #1 PREEMPT Wed Nov 6 21:28:47 UTC 2024 armv5tejl The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/949072/extract-nfsrootfs-f0oesovf' export NFS_ROOTFS='/var/lib/lava/dispa<46>systemd-journald[130]: Oldest entry in /var/log/journal/6f3905be5be343feb2f46242bdf37de1/system.journal is older than the configured file retention duration (1month), suggesting rotation. t<46>systemd-journald[130]: /var/log/journal/6f3905be5be343feb2f46242bdf37de1/system.journal: Journal header limits reached or header out-of-date, rotating. cher/tmp/949072/extract-nfsrootfs-f0oesovf' / # export NFS_SERVER_IP='192.168.56.218' export NFS_SERVER_IP='192.168.56.218' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-949072/environment . /lava-949072/environment / # /lava-949072/bin/lava-test-runner /lava-949072/0 /lava-949072/bin/lava-test-runner /lava-949072/0 + export TESTRUN_ID=0_dmesg + cd /lava-949072/0/tests/0_dmesg + cat uuid + UUID=949072_1.6<8> .2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8> <8> <8> + set +x <8> / #