- 15:19:56 [INFO] Starting target session - 15:20:13 [INFO] Connected to am574x-idk via serial - 15:20:13 [INFO] Host: #check prompt - 15:20:16 [ERROR] On command: #check prompt waiting for #check prompt.+?(?-mix:((?-mix:login:)|[Pp]assword)) >>> error: execution expired - 15:20:16 [INFO] Target: - 15:20:16 [INFO] Host: #check prompt - 15:20:18 [ERROR] On command: #check prompt waiting for #check prompt.+?(?-mix:\/[^\s]* #) >>> error: execution expired - 15:20:18 [INFO] Target: - 15:20:18 [INFO] Host: #check prompt - 15:20:21 [ERROR] On command: #check prompt waiting for #check prompt.+?(?-mix:\/[^\s]* #) >>> error: execution expired - 15:20:21 [INFO] Target: - 15:20:21 [INFO] Host: #check prompt - 15:20:23 [ERROR] On command: #check prompt waiting for #check prompt.+?(?-mix:\/[^\s]* #) >>> error: execution expired - 15:20:23 [INFO] Target: - 15:20:23 [INFO] Disconnected serial from am574x-idk - 15:20:23 [INFO] Connected to am574x-idk via serial - 15:20:23 [INFO] Host: - 15:20:23 [INFO] Disconnected serial from am574x-idk - 15:20:26 [INFO] Disconnected serial from am574x-idk - 15:20:29 [INFO] Disconnected serial from am574x-idk - 15:20:30 [INFO] Connected to am574x-idk via serial - 15:20:30 [INFO] Host: - 15:20:33 [INFO] Target: U-Boot SPL 2024.04-ti-gcdac8b4cd3cc (Oct 09 2024 - 21:22:25 +0000) DRA762-GP ES1.0 ABZ package Trying to boot from MMC1 no pinctrl state for default mode Loading Environment from FAT... no pinctrl state for default mode *** Error - No Valid Environment Area found *** Warning - bad env area, using default environment Loading Environment from MMC... *** Warning - bad CRC, using default environment U-Boot 2024.04-ti-gcdac8b4cd3cc (Oct 09 2024 - 21:22:25 +0000) CPU : DRA762-GP ES1.0 ABZ package Model: TI AM5748 IDK Board: AM574x IDK REV 1.0C DRAM: 2 GiB Core: 72 devices, 24 uclasses, devicetree: separate MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... *** Error - No Valid Environment Area found *** Warning - bad env area, using default environment Loading Environment from MMC... *** Warning - bad CRC, using default environment am57x_idk_lcd_detect: Failed to get I2C device 0/56 (ret -121) Net: Warning: ethernet@48484000 MAC addresses don't match: Address in DT is 90:9a:77:63:1e:be Address in environment is 70:ff:76:1c:36:d5 eth2: ethernet@48484000 Hit any key to stop autoboot: 2 0 => => => => => => => => => => - 15:20:34 [INFO] Disconnected serial from am574x-idk - 15:20:34 [INFO] Connected to am574x-idk via serial - 15:20:34 [INFO] Host: - 15:20:34 [INFO] Target: => - 15:20:34 [INFO] Host: version - 15:20:34 [INFO] Target: version U-Boot 2024.04-ti-gcdac8b4cd3cc (Oct 09 2024 - 21:22:25 +0000) => - 15:20:34 [INFO] Host: setenv bootargs 'console=ttyO2,115200n8 earlyprintk=serial,ttyO2,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ' - 15:20:34 [INFO] Target: setenv bootargs 'console=ttyO2,115200n8 earlyprintk=serial,ttyO2,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ' => - 15:20:34 [INFO] Host: setenv bootcmd '' - 15:20:35 [INFO] Target: setenv bootcmd '' => - 15:20:35 [INFO] Host: setenv autoload 'no' - 15:20:35 [INFO] Target: setenv autoload 'no' => - 15:20:35 [INFO] Host: setenv serverip '192.168.0.1' - 15:20:35 [INFO] Target: setenv serverip '192.168.0.1' => - 15:20:35 [INFO] Host: setenv _initramfs - - 15:20:35 [INFO] Target: setenv _initramfs - => - 15:20:35 [INFO] Host: printenv - 15:20:36 [INFO] Target: printenv _initramfs=- addr_fit=0x90000000 arch=arm args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} autoload=no baudrate=115200 board=am57xx board_name=am574x_idk board_rev=1.0C board_serial=23204P770078 boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootarm.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} boot_fdt=try boot_fit=0 boot_net_usb_start=usb start boot_prefixes=/ /boot/ boot_script_dhcp=boot.scr.uimg boot_scripts=boot.scr.uimg boot.scr boot_syslinux_conf=extlinux/extlinux.conf boot_targets=mmc0 mmc1 pxe dhcp bootargs=console=ttyO2,115200n8 earlyprintk=serial,ttyO2,115200n8 rootwait fsck.mode=skip sysrq_always_enabled bootcmd= bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00010:UNDI:003000;setenv bootp_arch 0xa;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; bootcmd_mmc0=devnum=0; run mmc_boot bootcmd_mmc1=devnum=1; run mmc_boot bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi bootdelay=2 bootenvfile=uEnv.txt bootm_size=0x10000000 bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} console=ttyS2,115200n8 cpu=armv7 dfu_alt_info_emmc=rawemmc raw 0 3751936;boot part 1 1;rootfs part 1 2;MLO fat 1 1;MLO.raw raw 0x100 0x200;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 1 1;spl-os-image fat 1 1;u-boot.img fat 1 1;uEnv.txt fat 1 1 dfu_alt_info_mmc=boot part 0 1;rootfs part 0 2;MLO fat 0 1;MLO.raw raw 0x100 0x200;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 0 1;spl-os-image fat 0 1;u-boot.img fat 0 1;uEnv.txt fat 0 1 dfu_alt_info_qspi=MLO raw 0x0 0x040000;u-boot.img raw 0x040000 0x0100000;u-boot-spl-os raw 0x140000 0x080000;u-boot-env raw 0x1C0000 0x010000;u-boot-env.backup raw 0x1D0000 0x010000;kernel raw 0x1E0000 0x800000 dfu_alt_info_ram=kernel ram 0x80200000 0x4000000;fdt ram 0x80f80000 0x80000;ramdisk ram 0x81000000 0x4000000 dfu_bufsiz=0x10000 distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done dofastboot=0 dtboaddr=0x89000000 efi_dtb_prefixes=/ /dtb/ /dtb/current/ emmc_android_boot=setenv mmcdev 1; mmc dev $mmcdev; mmc rescan; if bcb load 1 misc; then setenv ardaddr -; if bcb test command = bootonce-bootloader; then echo Android: Bootloader boot...; bcb clear command; bcb store; fastboot 1; exit; elif bcb test command = boot-recovery; then echo Android: Recovery boot...; setenv ardaddr $loadaddr;setenv apart recovery; else echo Android: Normal boot...; setenv ardaddr $loadaddr; setenv apart boot${slot_suffix}; fi; else echo Warning: BCB is corrupted or does not exist; echo Android: Normal boot...; fi; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv machid fe6; if part start mmc $mmcdev $apart boot_start; then part size mmc $mmcdev $apart boot_size; mmc read $loadaddr $boot_start $boot_size; echo Preparing FDT...; if test $board_name = am57xx_evm_reva3; then echo " Reading DTBO partition..."; part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; echo " Reading DTB for AM57x EVM RevA3..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; echo " Applying DTBOs for AM57x EVM RevA3..."; adtimg addr $dtboaddr; adtimg get dt --index=0 dtbo0_addr dtbo0_size; fdt apply $dtbo0_addr; adtimg get dt --index=1 dtbo1_addr dtbo1_size; fdt apply $dtbo1_addr; elif test $board_name = beagle_x15_revc; then echo " Reading DTB for Beagle X15 RevC..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; else echo Error: Android boot is not supported for $board_name; exit; fi; bootm $loadaddr $ardaddr $fdtaddr; else echo $apart partition not found; exit; fi; envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi; eth2addr=70:ff:76:1c:36:d5 eth3addr=70:ff:76:1c:36:d6 eth4addr=70:ff:76:1c:36:d7 eth5addr=70:ff:76:1c:36:d8 eth6addr=70:ff:76:1c:36:d9 eth7addr=70:ff:76:1c:36:da fastboot.board_rev=1.0C fastboot.cpu=DRA762 fastboot.product=am574x_idk fastboot.secure=GP fdt_addr_r=0x88000000 fdtaddr=0x88000000 fdtcontroladdr=fdf234b0 fdtfile=undefined fdtoverlay_addr_r=0x89000000 findfdt=if test $board_name = omap5_uevm; then setenv fdtfile omap5-uevm.dtb; fi; if test $board_name = dra7xx; then setenv fdtfile dra7-evm.dtb; fi;if test $board_name = dra72x-revc; then setenv fdtfile dra72-evm-revc.dtb; fi;if test $board_name = dra72x; then setenv fdtfile dra72-evm.dtb; fi;if test $board_name = dra71x; then setenv fdtfile dra71-evm.dtb; fi;if test $board_name = dra76x_acd; then setenv fdtfile dra76-evm.dtb; fi;if test $board_name = beagle_x15; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = beagle_x15_revb1; then setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;if test $board_name = beagle_x15_revc; then setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;if test $board_name = am5729_beagleboneai; then setenv fdtfile am5729-beagleboneai.dtb; fi;if test $board_name = am572x_idk; then setenv fdtfile am572x-idk.dtb; fi;if test $board_name = am574x_idk; then setenv fdtfile am574x-idk.dtb; fi;if test $board_name = am57xx_evm; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = am57xx_evm_reva3; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = am571x_idk; then setenv fdtfile am571x-idk.dtb; fi;if test $fdtfile = undefined; then echo WARNING: Could not determine device tree to use; fi; finduuid=part uuid mmc 0:2 uuid get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} get_overlaystring=for overlay in $name_overlays;do;setenv overlaystring ${overlaystring}'#'${overlay};done; idk_lcd=no importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} kernel_addr_r=0x82000000 load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} loadaddr=0x82000000 loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados;fi;fi;fi; mmcdev=0 mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; mmcrootfstype=ext4 rootwait name_fit=fitImage netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp netboot=echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; bootz ${loadaddr} - ${fdtaddr} netloadfdt=tftp ${fdtaddr} ${fdtfile} netloadimage=tftp ${loadaddr} ${bootfile} nfsopts=nolock partitions=uuid_disk=${uuid_gpt_disk};name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs} partitions_android=uuid_disk=${uuid_gpt_disk};name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};name=misc,size=128K,uuid=${uuid_gpt_misc};name=boot_a,size=20M,uuid=${uuid_gpt_boot_a};name=boot_b,size=20M,uuid=${uuid_gpt_boot_b};name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};name=recovery,size=64M,uuid=${uuid_gpt_recovery};name=super,size=2560M,uuid=${uuid_gpt_super};name=metadata,size=16M,uuid=${uuid_gpt_metadata};name=userdata,size=-,uuid=${uuid_gpt_userdata} pxefile_addr_r=0x80100000 ramdisk_addr_r=0x88080000 rdaddr=0x88080000 rootpath=/export/rootfs run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootarm.efi; then echo Found EFI removable media binary efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done scriptaddr=0x80000000 scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi serial#=1700300a76c60000 serverip=192.168.0.1 soc=omap5 static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off stderr=serial@48020000 stdin=serial@48020000 stdout=serial@48020000 update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi usbtty=cdc_acm vendor=ti ver=U-Boot 2024.04-ti-gcdac8b4cd3cc (Oct 09 2024 - 21:22:25 +0000) vram=16M Environment size: 11877/131067 bytes => - 15:20:36 [INFO] Host: printenv bootargs - 15:20:37 [INFO] Target: printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk=serial,ttyO2,115200n8 rootwait fsck.mode=skip sysrq_always_enabled => - 15:20:37 [INFO] Host: setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp ' - 15:20:37 [INFO] Target: setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp ' => - 15:20:37 [INFO] Host: setenv serverip '192.168.0.1' - 15:20:37 [INFO] Target: setenv serverip '192.168.0.1' => - 15:20:37 [INFO] Host: setenv autoload 'no' - 15:20:37 [INFO] Target: setenv autoload 'no' => - 15:20:37 [INFO] Host: dhcp - 15:20:38 [INFO] Target: dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.0.60 (1004 ms) => - 15:20:38 [INFO] Host: tftp ${loadaddr} 192.168.0.1:vatf_am574x-idk-02/d4270a7f45e7d49f925336daecf77661 - 15:20:49 [INFO] Target: tftp ${loadaddr} 192.168.0.1:vatf_am574x-idk-02/d4270a7f45e7d49f925336daecf77661 link up on port 0, speed 1000, full duplex Using ethernet@48484000 device TFTP from server 192.168.0.1; our IP address is 192.168.0.60 Filename 'vatf_am574x-idk-02/d4270a7f45e7d49f925336daecf77661'. This will not be a case any time This will not be a case any time Load address: 0x82000000 Loading: *T ###T ############################################### 5.1 MiB 490.2 KiB/s done Bytes transferred = 5392552 (5248a8 hex) => - 15:20:49 [INFO] Host: tftp ${fdt_addr_r} 192.168.0.1:vatf_am574x-idk-02/1c810046b878b42d40fafb6739567b6f - 15:20:50 [INFO] Target: tftp ${fdt_addr_r} 192.168.0.1:vatf_am574x-idk-02/1c810046b878b42d40fafb6739567b6f link up on port 0, speed 1000, full duplex Using ethernet@48484000 device TFTP from server 192.168.0.1; our IP address is 192.168.0.60 Filename 'vatf_am574x-idk-02/1c810046b878b42d40fafb6739567b6f'. This will not be a case any time This will not be a case any time Load address: 0x88000000 Loading: *################################################## 147.8 KiB 4 MiB/s done Bytes transferred = 151357 (24f3d hex) => - 15:20:50 [INFO] Host: fdt address ${fdt_addr_r} - 15:20:50 [INFO] Target: fdt address ${fdt_addr_r} Working FDT set to 88000000 => - 15:20:50 [INFO] Host: printenv bootargs - 15:20:50 [INFO] Target: printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk=serial,ttyO2,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp => - 15:20:50 [INFO] Host: setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/am574x-idk-02/autofs/b06161d40b3c772047a7b3c7161409a5,nolock,v3,tcp,rsize=4096,wsize=4096 ' - 15:20:50 [INFO] Target: setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/am574x-idk-02/autofs/b06161d40b3c772047a7b3c7161409a5,nolock,v3,tcp,rsize=4096,wsize=4096 ' => - 15:20:50 [INFO] Host: printenv bootcmd - 15:20:50 [INFO] Target: printenv bootcmd bootcmd= => - 15:20:50 [INFO] Host: setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' - 15:20:51 [INFO] Target: setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' => - 15:20:51 [INFO] Host: version - 15:20:51 [INFO] Target: version U-Boot 2024.04-ti-gcdac8b4cd3cc (Oct 09 2024 - 21:22:25 +0000) => - 15:20:51 [INFO] Host: bdinfo - 15:20:51 [INFO] Target: bdinfo boot_params = 0x80000100 DRAM bank = 0x00000000 -> start = 0x80000000 -> size = 0x80000000 flashstart = 0x00000000 flashsize = 0x00000000 flashoffset = 0x00000000 baudrate = 115200 bps relocaddr = 0xfff66000 reloc off = 0x7f766000 Build = 32-bit current eth = ethernet@48484000 eth2addr = 70:ff:76:1c:36:d5 IP addr = 192.168.0.60 fdt_blob = 0xfdf234b0 new_fdt = 0xfdf234b0 fdt_size = 0x00022a00 This will not be a case any time This will not be a case any time lmb_dump_all: memory.cnt = 0x1 / max = 0x10 memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0 reserved.cnt = 0x1 / max = 0x10 reserved[0] [0xfcf15000-0xffffffff], 0x030eb000 bytes flags: 0 devicetree = separate serial addr = 0x48020000 width = 0x00000000 shift = 0x00000002 offset = 0x00000000 clock = 0x02dc6c00 arch_number = 0x00000000 TLB addr = 0xffff0000 irq_sp = 0xfdf234a0 sp start = 0xfdf23490 Early malloc usage: 5b8 / 2000 => - 15:20:51 [INFO] Host: - 15:20:51 [INFO] Target: boot_params = 0x80000100 DRAM bank = 0x00000000 -> start = 0x80000000 -> size = 0x80000000 flashstart = 0x00000000 flashsize = 0x00000000 flashoffset = 0x00000000 baudrate = 115200 bps relocaddr = 0xfff66000 reloc off = 0x7f766000 Build = 32-bit current eth = ethernet@48484000 eth2addr = 70:ff:76:1c:36:d5 IP addr = 192.168.0.60 fdt_blob = 0xfdf234b0 new_fdt = 0xfdf234b0 fdt_size = 0x00022a00 This will not be a case any time This will not be a case any time lmb_dump_all: memory.cnt = 0x1 / max = 0x10 memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0 reserved.cnt = 0x1 / max = 0x10 reserved[0] [0xfcf15000-0xffffffff], 0x030eb000 bytes flags: 0 devicetree = separate serial addr = 0x48020000 width = 0x00000000 shift = 0x00000002 offset = 0x00000000 clock = 0x02dc6c00 arch_number = 0x00000000 TLB addr = 0xffff0000 irq_sp = 0xfdf234a0 sp start = 0xfdf23490 Early malloc usage: 5b8 / 2000 => - 15:20:51 [INFO] Host: ls mmc 0:1 - 15:20:51 [INFO] Target: ls mmc 0:1 209124 am571x-idk.dtb 806 am571x-idk-touchscreen.dtbo 208557 am5729-beagleboneai.dtb 216231 am572x-idk.dtb 806 am572x-idk-touchscreen.dtbo 210447 am574x-idk.dtb 213304 am57xx-beagle-x15.dtb 213328 am57xx-beagle-x15-revb1.dtb 213294 am57xx-beagle-x15-revc.dtb 201784 am57xx-cl-som-am57x.dtb 214836 am57xx-evm.dtb 3496 am57xx-evm.dtbo 214822 am57xx-evm-reva3.dtb 1886 am57xx-idk-lcd-osd101t2045.dtbo 1886 am57xx-idk-lcd-osd101t2587.dtbo 205667 am57xx-sbc-am57x.dtb extlinux/ 126768 MLO 1554476 u-boot.img 574 uEnv.txt 8147456 zImage 4 ws-calibrate.rules 21 file(s), 1 dir(s) => - 15:20:51 [INFO] Host: ls mmc 1:1 - 15:20:52 [INFO] Target: ls mmc 1:1 ** No partition table - mmc 1 ** Couldn't find partition mmc 1:1 => - 15:20:52 [INFO] Host: ext4ls mmc 0:2 /lib/firmware - 15:20:52 [INFO] Target: ext4ls mmc 0:2 /lib/firmware 4096 . 36864 .. 2040 LICENCE.ibt_firmware 2046 LICENCE.iwlwifi_firmware 53 am57xx-pru1_0-fw 53 am57xx-pru1_1-fw 53 am57xx-pru2_0-fw 53 am57xx-pru2_1-fw 9941039 dra7-dsp1-fw-radio.xe66 55 dra7-dsp1-fw.xe66 55 dra7-dsp2-fw.xe66 55 dra7-ipu1-fw.xem4 55 dra7-ipu2-fw.xem4 186 goodix_9271_cfg.bin 4096 intel 4096 ipc 918268 iwlwifi-3160-17.ucode 2448976 iwlwifi-8000C-34.ucode 2428004 iwlwifi-8000C-36.ucode 2440780 iwlwifi-8265-34.ucode 2436632 iwlwifi-8265-36.ucode 2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode 2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode 1490508 iwlwifi-9260-th-b0-jf-b0-46.ucode 4096 pru 5440 regulatory.db 1085 regulatory.db.p7s 4096 ti-connectivity 4096 ti-pruss 4002 vpdma-1b8.bin => - 15:20:52 [INFO] Host: ext4ls mmc 1:2 /lib/firmware - 15:20:52 [INFO] Target: ext4ls mmc 1:2 /lib/firmware ** No partition table - mmc 1 ** Couldn't find partition mmc 1:2 => - 15:20:52 [INFO] Host: mmc rescan; echo $? - 15:20:52 [INFO] Target: mmc rescan; echo $? 0 => - 15:20:52 [INFO] Host: fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4 - 15:20:53 [INFO] Target: fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4 4 bytes written in 23 ms (0 Bytes/s) => - 15:20:53 [INFO] Host: setenv extraargs 0 - 15:20:53 [INFO] Target: setenv extraargs 0 => - 15:20:53 [INFO] Host: printenv - 15:20:54 [INFO] Target: printenv _initramfs=- addr_fit=0x90000000 arch=arm args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} autoload=no baudrate=115200 board=am57xx board_name=am574x_idk board_rev=1.0C board_serial=23204P770078 boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootarm.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} boot_fdt=try boot_fit=0 boot_net_usb_start=usb start boot_prefixes=/ /boot/ boot_script_dhcp=boot.scr.uimg boot_scripts=boot.scr.uimg boot.scr boot_syslinux_conf=extlinux/extlinux.conf boot_targets=mmc0 mmc1 pxe dhcp bootargs=console=ttyO2,115200n8 earlyprintk=serial,ttyO2,115200n8 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/am574x-idk-02/autofs/b06161d40b3c772047a7b3c7161409a5,nolock,v3,tcp,rsize=4096,wsize=4096 bootcmd= if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00010:UNDI:003000;setenv bootp_arch 0xa;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; bootcmd_mmc0=devnum=0; run mmc_boot bootcmd_mmc1=devnum=1; run mmc_boot bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi bootdelay=2 bootenvfile=uEnv.txt bootm_size=0x10000000 bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} console=ttyS2,115200n8 cpu=armv7 dfu_alt_info_emmc=rawemmc raw 0 3751936;boot part 1 1;rootfs part 1 2;MLO fat 1 1;MLO.raw raw 0x100 0x200;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 1 1;spl-os-image fat 1 1;u-boot.img fat 1 1;uEnv.txt fat 1 1 dfu_alt_info_mmc=boot part 0 1;rootfs part 0 2;MLO fat 0 1;MLO.raw raw 0x100 0x200;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 0 1;spl-os-image fat 0 1;u-boot.img fat 0 1;uEnv.txt fat 0 1 dfu_alt_info_qspi=MLO raw 0x0 0x040000;u-boot.img raw 0x040000 0x0100000;u-boot-spl-os raw 0x140000 0x080000;u-boot-env raw 0x1C0000 0x010000;u-boot-env.backup raw 0x1D0000 0x010000;kernel raw 0x1E0000 0x800000 dfu_alt_info_ram=kernel ram 0x80200000 0x4000000;fdt ram 0x80f80000 0x80000;ramdisk ram 0x81000000 0x4000000 dfu_bufsiz=0x10000 distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done dnsip=192.0.2.2 dnsip2=192.0.2.3 dofastboot=0 dtboaddr=0x89000000 efi_dtb_prefixes=/ /dtb/ /dtb/current/ emmc_android_boot=setenv mmcdev 1; mmc dev $mmcdev; mmc rescan; if bcb load 1 misc; then setenv ardaddr -; if bcb test command = bootonce-bootloader; then echo Android: Bootloader boot...; bcb clear command; bcb store; fastboot 1; exit; elif bcb test command = boot-recovery; then echo Android: Recovery boot...; setenv ardaddr $loadaddr;setenv apart recovery; else echo Android: Normal boot...; setenv ardaddr $loadaddr; setenv apart boot${slot_suffix}; fi; else echo Warning: BCB is corrupted or does not exist; echo Android: Normal boot...; fi; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv machid fe6; if part start mmc $mmcdev $apart boot_start; then part size mmc $mmcdev $apart boot_size; mmc read $loadaddr $boot_start $boot_size; echo Preparing FDT...; if test $board_name = am57xx_evm_reva3; then echo " Reading DTBO partition..."; part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; echo " Reading DTB for AM57x EVM RevA3..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; echo " Applying DTBOs for AM57x EVM RevA3..."; adtimg addr $dtboaddr; adtimg get dt --index=0 dtbo0_addr dtbo0_size; fdt apply $dtbo0_addr; adtimg get dt --index=1 dtbo1_addr dtbo1_size; fdt apply $dtbo1_addr; elif test $board_name = beagle_x15_revc; then echo " Reading DTB for Beagle X15 RevC..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; else echo Error: Android boot is not supported for $board_name; exit; fi; bootm $loadaddr $ardaddr $fdtaddr; else echo $apart partition not found; exit; fi; envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi; eth2addr=70:ff:76:1c:36:d5 eth3addr=70:ff:76:1c:36:d6 eth4addr=70:ff:76:1c:36:d7 eth5addr=70:ff:76:1c:36:d8 eth6addr=70:ff:76:1c:36:d9 eth7addr=70:ff:76:1c:36:da ethact=ethernet@48484000 extraargs=0 fastboot.board_rev=1.0C fastboot.cpu=DRA762 fastboot.product=am574x_idk fastboot.secure=GP fdt_addr_r=0x88000000 fdtaddr=88000000 fdtcontroladdr=fdf234b0 fdtfile=undefined fdtoverlay_addr_r=0x89000000 fileaddr=88000000 filesize=24f3d findfdt=if test $board_name = omap5_uevm; then setenv fdtfile omap5-uevm.dtb; fi; if test $board_name = dra7xx; then setenv fdtfile dra7-evm.dtb; fi;if test $board_name = dra72x-revc; then setenv fdtfile dra72-evm-revc.dtb; fi;if test $board_name = dra72x; then setenv fdtfile dra72-evm.dtb; fi;if test $board_name = dra71x; then setenv fdtfile dra71-evm.dtb; fi;if test $board_name = dra76x_acd; then setenv fdtfile dra76-evm.dtb; fi;if test $board_name = beagle_x15; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = beagle_x15_revb1; then setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;if test $board_name = beagle_x15_revc; then setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;if test $board_name = am5729_beagleboneai; then setenv fdtfile am5729-beagleboneai.dtb; fi;if test $board_name = am572x_idk; then setenv fdtfile am572x-idk.dtb; fi;if test $board_name = am574x_idk; then setenv fdtfile am574x-idk.dtb; fi;if test $board_name = am57xx_evm; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = am57xx_evm_reva3; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = am571x_idk; then setenv fdtfile am571x-idk.dtb; fi;if test $fdtfile = undefined; then echo WARNING: Could not determine device tree to use; fi; finduuid=part uuid mmc 0:2 uuid gatewayip=192.168.0.1 get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} get_overlaystring=for overlay in $name_overlays;do;setenv overlaystring ${overlaystring}'#'${overlay};done; idk_lcd=no importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} ipaddr=192.168.0.60 kernel_addr_r=0x82000000 load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} loadaddr=0x82000000 loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados;fi;fi;fi; mmcdev=0 mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; mmcrootfstype=ext4 rootwait name_fit=fitImage netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp netboot=echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; bootz ${loadaddr} - ${fdtaddr} netloadfdt=tftp ${fdtaddr} ${fdtfile} netloadimage=tftp ${loadaddr} ${bootfile} netmask=255.255.255.0 nfsopts=nolock partitions=uuid_disk=${uuid_gpt_disk};name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs} partitions_android=uuid_disk=${uuid_gpt_disk};name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};name=misc,size=128K,uuid=${uuid_gpt_misc};name=boot_a,size=20M,uuid=${uuid_gpt_boot_a};name=boot_b,size=20M,uuid=${uuid_gpt_boot_b};name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};name=recovery,size=64M,uuid=${uuid_gpt_recovery};name=super,size=2560M,uuid=${uuid_gpt_super};name=metadata,size=16M,uuid=${uuid_gpt_metadata};name=userdata,size=-,uuid=${uuid_gpt_userdata} pxefile_addr_r=0x80100000 ramdisk_addr_r=0x88080000 rdaddr=0x88080000 rootpath=/export/rootfs run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootarm.efi; then echo Found EFI removable media binary efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done scriptaddr=0x80000000 scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi serial#=1700300a76c60000 serverip=192.168.0.1 soc=omap5 static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off stderr=serial@48020000 stdin=serial@48020000 stdout=serial@48020000 update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi usbtty=cdc_acm vendor=ti ver=U-Boot 2024.04-ti-gcdac8b4cd3cc (Oct 09 2024 - 21:22:25 +0000) vram=16M Environment size: 12389/131067 bytes => - 15:20:54 [INFO] Host: setenv bootcmd 'if iminfo ${loadaddr}; then setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' - 15:20:54 [INFO] Target: setenv bootcmd 'if iminfo ${loadaddr}; then setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else setenv bootargs ${bootargs} ${extraargs}; bootz ${loadaddr} ${_initramfs} ${fdt_addr_r}; setenv bootargs ${bootargs} ${extraargs}; bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' => - 15:20:54 [INFO] Host: setenv emmc_android_boot 'setenv mmcdev 1; mmc dev $mmcdev; mmc rescan; if bcb load 1 misc; then setenv ardaddr -; if bcb test command = bootonce-bootloader; then echo Android: Bootloader boot...; bcb clear command; bcb store; fastboot 1; exit; elif bcb test command = boot-recovery; then echo Android: Recovery boot...; setenv ardaddr $loadaddr;setenv apart recovery; else echo Android: Normal boot...; setenv ardaddr $loadaddr; setenv apart boot${slot_suffix}; fi; else echo Warning: BCB is corrupted or does not exist; echo Android: Normal boot...; fi; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv machid fe6; if part start mmc $mmcdev $apart boot_start; then part size mmc $mmcdev $apart boot_size; mmc read $loadaddr $boot_start $boot_size; echo Preparing FDT...; if test $board_name = am57xx_evm_reva3; then echo " Reading DTBO partition..."; part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; echo " Reading DTB for AM57x EVM RevA3..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; echo " Applying DTBOs for AM57x EVM RevA3..."; adtimg addr $dtboaddr; adtimg get dt --index=0 dtbo0_addr dtbo0_size; fdt apply $dtbo0_addr; adtimg get dt --index=1 dtbo1_addr dtbo1_size; fdt apply $dtbo1_addr; elif test $board_name = beagle_x15_revc; then echo " Reading DTB for Beagle X15 RevC..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; else echo Error: Android boot is not supported for $board_name; exit; fi; setenv bootargs ${bootargs} ${extraargs}; bootm $loadaddr $ardaddr $fdtaddr; else echo $apart partition not found; exit; fi;' - 15:21:04 [ERROR] On command: setenv emmc_android_boot 'setenv mmcdev 1; mmc dev $mmcdev; mmc rescan; if bcb load 1 misc; then setenv ardaddr -; if bcb test command = bootonce-bootloader; then echo Android: Bootloader boot...; bcb clear command; bcb store; fastboot 1; exit; elif bcb test command = boot-recovery; then echo Android: Recovery boot...; setenv ardaddr $loadaddr;setenv apart recovery; else echo Android: Normal boot...; setenv ardaddr $loadaddr; setenv apart boot${slot_suffix}; fi; else echo Warning: BCB is corrupted or does not exist; echo Android: Normal boot...; fi; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv machid fe6; if part start mmc $mmcdev $apart boot_start; then part size mmc $mmcdev $apart boot_size; mmc read $loadaddr $boot_start $boot_size; echo Preparing FDT...; if test $board_name = am57xx_evm_reva3; then echo " Reading DTBO partition..."; part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; echo " Reading DTB for AM57x EVM RevA3..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; echo " Applying DTBOs for AM57x EVM RevA3..."; adtimg addr $dtboaddr; adtimg get dt --index=0 dtbo0_addr dtbo0_size; fdt apply $dtbo0_addr; adtimg get dt --index=1 dtbo1_addr dtbo1_size; fdt apply $dtbo1_addr; elif test $board_name = beagle_x15_revc; then echo " Reading DTB for Beagle X15 RevC..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; else echo Error: Android boot is not supported for $board_name; exit; fi; setenv bootargs ${bootargs} ${extraargs}; bootm $loadaddr $ardaddr $fdtaddr; else echo $apart partition not found; exit; fi;' waiting for setenv emmc_android_boot 'setenv mmcdev 1; mmc dev $mmcdev; mmc rescan; if bcb load 1 misc; then setenv ardaddr -; if bcb test command = bootonce-bootloader; then echo Android: Bootloader boot...; bcb clear command; bcb store; fastboot 1; exit; elif bcb test command = boot-recovery; then echo Android: Recovery boot...; setenv ardaddr $loadaddr;setenv apart recovery; else echo Android: Normal boot...; setenv ardaddr $loadaddr; setenv apart boot${slot_suffix}; fi; else echo Warning: BCB is corrupted or does not exist; echo Android: Normal boot...; fi; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv machid fe6; if part start mmc $mmcdev $apart boot_start; then part size mmc $mmcdev $apart boot_size; mmc read $loadaddr $boot_start $boot_size; echo Preparing FDT...; if test $board_name = am57xx_evm_reva3; then echo " Reading DTBO partition..."; part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; echo " Reading DTB for AM57x EVM RevA3..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; echo " Applying DTBOs for AM57x EVM RevA3..."; adtimg addr $dtboaddr; adtimg get dt --index=0 dtbo0_addr dtbo0_size; fdt apply $dtbo0_addr; adtimg get dt --index=1 dtbo1_addr dtbo1_size; fdt apply $dtbo1_addr; elif test $board_name = beagle_x15_revc; then echo " Reading DTB for Beagle X15 RevC..."; abootimg get dtb --index=0 dtb_start dtb_size; cp.b $dtb_start $fdtaddr $dtb_size; fdt addr $fdtaddr 0x80000; else echo Error: Android boot is not supported for $board_name; exit; fi; setenv bootargs ${bootargs} ${extraargs}; bootm $loadaddr $ardaddr $fdtaddr; else echo $apart partition not found; exit; fi;'.+?(?-mix:(?-mix:=>)|=>) >>> error: execution expired - 15:21:04 [INFO] Target: setenv emmc_android_boot 'setenv mmcdev 1; mmc dev $mmcdev; mmc rescan; if bcb load 1 misc; then setenv ardaddr -; if bcb test command = bootonce-bootloader; then echo Android: Bootloader boot...; bcb clear command; bcb store; fastboot 1; exit; elif bcb test command = boot-recovery; then echo Android: Recovery boot...; setenv ardaddr $loadaddr;setenv apart recovery; else echo Android: Normal boot...; setenv ardaddr $loadaddr; setenv apart boot${slot_suffix}; fi; else echo Warning: BCB is corrupted or does not exist; echo Android: Normal boot...; fi; setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv machid fe6; if part start mmc $mmcdev $apart boot_start; then part size mmc $mmcdev $apart boot_size; mmc read $loadaddr $boot_start $boot_size; echo Preparing FDT...; if test $board_name = am57xx_evm_reva3; then echo " Reading DTBO partition..."; part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; mmc read ${dtboaddr} ${p_dtbo_s - 15:21:04 [INFO] Boot attempt 1/1 failed - 15:21:04 [INFO] Collecting kernel traces via sysrq... - 15:21:15 [INFO] - 15:21:25 [INFO] - 15:21:35 [INFO] - 15:21:35 [INFO] Disconnected serial from am574x-idk - 15:21:35 [INFO] Host: cd /test