Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'.  U-Boot SPL 2018.01-dirty (Jul 31 2024 - 16:15:46) Trying to boot from MMC2 U-Boot 2018.01-dirty (Jul 31 2024 - 16:15:46 +0200) CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 4 seconds U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.175.42 (12 ms) U-Boot> setenv serverip 192.168.32.2 setenv serverip 192.168.32.2 U-Boot> tftp 0x82000000 1220883/tftp-deploy-gypi5dy9/kernel/zImage tftp 0x82000000 1220883/tftp-deploy-gypi5dy9/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.32.2; our IP address is 192.168.175.42; sending through gateway 192.168.175.254 Filename '1220883/tftp-deploy-gypi5dy9/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################### 3.1 MiB/s done Bytes transferred = 10998272 (a7d200 hex) U-Boot> tftp 0x83000000 1220883/tftp-deploy-gypi5dy9/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1220883/tftp-deploy-gypi5dy9/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.32.2; our IP address is 192.168.175.42; sending through gateway 192.168.175.254 Filename '1220883/tftp-deploy-gypi5dy9/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 3.3 MiB/s done Bytes transferred = 17837043 (1102bf3 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x88000000 1220883/tftp-deploy-gypi5dy9/dtb/am335x-boneblack.dtb tftp 0x88000000 1220883/tftp-deploy-gypi5dy9/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.32.2; our IP address is 192.168.175.42; sending through gateway 192.168.175.254 Filename '1220883/tftp-deploy-gypi5dy9/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 3.1 MiB/s done Bytes transferred = 70568 (113a8 hex) U-Boot> setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-11-10 19:50:17 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17836979 Bytes = 17 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 880143a7 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc6 (KernelCI@build-j372006-arm-gcc-12-multi-v7-defconfig-config-smp-n-bcngj) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Sun Nov 10 19:10:13 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: legacy bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008334] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019117] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033917] Console: colour dummy device 80x30 <3>[ 0.038807] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045842] This ensures that you still see kernel messages. Please <3>[ 0.052558] update your kernel commandline. <6>[ 0.057155] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096100] CPU: Testing write buffer coherency: ok <6>[ 0.101471] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106931] pid_max: default: 32768 minimum: 301 <6>[ 0.112082] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.119894] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.169451] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.183098] EFI services will not be available. <6>[ 0.188125] Memory: 405472K/522240K available (15360K kernel code, 2542K rwdata, 6716K rodata, 2048K init, 413K bss, 49924K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.204291] devtmpfs: initialized <6>[ 0.218945] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.227413] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.237838] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.250195] pinctrl core: initialized pinctrl subsystem <6>[ 0.260582] DMI not present or invalid. <6>[ 0.265932] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.274683] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.285812] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.285862] cpuidle: using governor menu <6>[ 0.318655] No ATAGs? <6>[ 0.321354] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.332660] Serial: AMBA PL011 UART driver <6>[ 0.354598] iommu: Default domain type: Translated <6>[ 0.359881] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.367980] SCSI subsystem initialized <6>[ 0.400092] usbcore: registered new interface driver usbfs <6>[ 0.406040] usbcore: registered new interface driver hub <6>[ 0.411847] usbcore: registered new device driver usb <6>[ 0.418251] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.423661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.433351] PTP clock support registered <6>[ 0.437783] EDAC MC: Ver: 3.0.0 <6>[ 0.489325] scmi_core: SCMI protocol bus registered <6>[ 0.497129] vgaarb: loaded <6>[ 0.509952] clocksource: Switched to clocksource dmtimer <6>[ 0.534973] NET: Registered PF_INET protocol family <6>[ 0.540611] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.549291] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.558298] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.566559] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 0.574832] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 0.582495] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.589389] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) <6>[ 0.596400] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) <6>[ 0.603976] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.683945] RPC: Registered named UNIX socket transport module. <6>[ 0.690355] RPC: Registered udp transport module. <6>[ 0.695456] RPC: Registered tcp transport module. <6>[ 0.700564] RPC: Registered tcp-with-tls transport module. <6>[ 0.706469] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.713378] PCI: CLS 0 bytes, default 64 <5>[ 0.718873] Initialise system trusted keyrings <6>[ 0.737255] Trying to unpack rootfs image as initramfs... <6>[ 0.800191] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 0.807637] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.840403] NFS: Registering the id_resolver key type <5>[ 0.845982] Key type id_resolver registered <5>[ 0.850596] Key type id_legacy registered <6>[ 0.855026] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.862218] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.930402] Key type asymmetric registered <5>[ 0.934922] Asymmetric key parser 'x509' registered <6>[ 0.940392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.948277] io scheduler mq-deadline registered <6>[ 0.953224] io scheduler kyber registered <6>[ 0.957671] io scheduler bfq registered <6>[ 0.970733] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.285134] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.333984] msm_serial: driver initialized <6>[ 1.338755] SuperH (H)SCI(F) driver initialized <6>[ 1.343991] STMicroelectronics ASC driver initialized <6>[ 1.349570] STM32 USART driver initialized <6>[ 1.453837] brd: module loaded <6>[ 1.474569] loop: module loaded <6>[ 1.506811] CAN device driver interface <6>[ 1.511919] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.518766] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.524189] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.530625] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.536445] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.545411] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.551531] usbcore: registered new interface driver pegasus <6>[ 1.557654] usbcore: registered new interface driver asix <6>[ 1.563530] usbcore: registered new interface driver ax88179_178a <6>[ 1.570104] usbcore: registered new interface driver cdc_ether <6>[ 1.576391] usbcore: registered new interface driver smsc75xx <6>[ 1.582602] usbcore: registered new interface driver smsc95xx <6>[ 1.588804] usbcore: registered new interface driver net1080 <6>[ 1.594926] usbcore: registered new interface driver cdc_subset <6>[ 1.601318] usbcore: registered new interface driver zaurus <6>[ 1.607349] usbcore: registered new interface driver cdc_ncm <6>[ 1.616435] usbcore: registered new interface driver usb-storage <6>[ 1.627047] i2c_dev: i2c /dev entries driver <5>[ 1.644224] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 1.653394] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.660112] sdhci: Copyright(c) Pierre Ossman <6>[ 1.666395] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.674238] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.683824] usbcore: registered new interface driver usbhid <6>[ 1.689845] usbhid: USB HID core driver <6>[ 1.700951] NET: Registered PF_INET6 protocol family <6>[ 2.144669] Segment Routing with IPv6 <6>[ 2.148806] In-situ OAM (IOAM) with IPv6 <6>[ 2.153230] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.160400] NET: Registered PF_PACKET protocol family <6>[ 2.165885] can: controller area network core <6>[ 2.170736] NET: Registered PF_CAN protocol family <6>[ 2.175937] can: raw protocol <6>[ 2.179256] can: broadcast manager protocol <6>[ 2.183846] can: netlink gateway - max_hops=1 <5>[ 2.189314] Key type dns_resolver registered <6>[ 2.194337] ThumbEE CPU extension supported. <5>[ 2.199017] Registering SWP/SWPB emulation handler <3>[ 2.204696] omap_voltage_late_init: Voltage driver support not added <5>[ 2.370911] Loading compiled-in X.509 certificates <6>[ 2.466010] platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/clkout2-pins <6>[ 2.482486] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <3>[ 2.504483] ti-sysc 44e31000.target-module: probe with driver ti-sysc failed with error -16 <3>[ 2.696439] ti-sysc 48040000.target-module: probe with driver ti-sysc failed with error -16 <6>[ 2.873862] OMAP GPIO hardware version 0.1 <6>[ 2.891105] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <4>[ 2.975177] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 3.030286] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 3.064874] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 3.111151] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 3.160320] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <3>[ 3.231218] 48000000.interconnect:segment@200000:target-module@0:mpu@0:fck: device ID is greater than 24 <6>[ 3.250822] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <4>[ 3.275900] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.300945] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.430127] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 3.454331] random: crng init done <6>[ 3.510587] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.910701] Freeing initrd memory: 17420K <6>[ 3.976716] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.986911] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 3.994214] cpsw-switch 4a100000.switch: ALE Table size 1024, Policers 0 <6>[ 4.001637] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 4.009703] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 4.021313] cpsw-switch 4a100000.switch: Detected MACID = 08:04:b4:96:48:24 <5>[ 4.029908] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 4.057421] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.065995] edma 49000000.dma: TI EDMA DMA engine driver <3>[ 4.127315] target-module@4b000000:target-module@140000:pmu@0:fck: device ID is greater than 24 <6>[ 4.140769] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 (8000000f) counters available <3>[ 4.158098] l3-aon-clkctrl:0000:0: failed to disable <6>[ 4.220740] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 36, base_baud = 3000000) is a 8250 <6>[ 4.230135] printk: legacy console [ttyS0] enabled <6>[ 4.230135] printk: legacy console [ttyS0] enabled <6>[ 4.240431] printk: legacy bootconsole [omap8250] disabled <6>[ 4.240431] printk: legacy bootconsole [omap8250] disabled <4>[ 4.290530] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.297722] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.315413] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.322187] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 4.335795] i2c 0-0070: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 4.347576] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.366742] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.375880] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.380998] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 4.393678] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 4.402285] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 4.410718] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.481387] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 4.513153] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.560084] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 4.568829] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 4.628130] mmc1: new high speed MMC card at address 0001 <6>[ 4.635130] mmcblk1: mmc1:0001 MK2704 3.53 GiB <6>[ 4.643295] mmcblk1: p1 <6>[ 4.647325] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 4.658503] mmcblk1boot0: mmc1:0001 MK2704 2.00 MiB <6>[ 4.666151] mmcblk1boot1: mmc1:0001 MK2704 2.00 MiB <6>[ 4.678765] mmcblk1rpmb: mmc1:0001 MK2704 512 KiB, chardev (236:0) <6>[ 6.760873] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <5>[ 6.789996] Sending DHCP requests ., OK <6>[ 6.874172] IP-Config: Got DHCP answer from 192.168.175.254, my address is 192.168.175.42 <6>[ 6.882777] IP-Config: Complete: <6>[ 6.886305] device=eth0, hwaddr=08:04:b4:96:48:24, ipaddr=192.168.175.42, mask=255.255.255.0, gw=192.168.175.254 <6>[ 6.897304] host=beaglebone, domain=, nis-domain=(none) <6>[ 6.903302] bootserver=192.168.175.254, rootserver=192.168.175.254, rootpath= <6>[ 6.903331] nameserver0=192.168.175.254 <6>[ 6.916619] clk: Disabling unused clocks <6>[ 6.921234] PM: genpd: Disabling unused power domains <6>[ 6.937712] Freeing unused kernel image (initmem) memory: 2048K <6>[ 6.946640] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.131442] udevd[95]: starting version 3.2.9 <27>[ 7.147126] udevd[95]: specified user 'tss' unknown <27>[ 7.152773] udevd[95]: specified group 'tss' unknown <30>[ 7.171080] udevd[96]: starting eudev-3.2.9 <4>[ 8.879483] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 9.151106] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 9.252079] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 9.257753] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 9.417228] hub 1-0:1.0: USB hub found <6>[ 9.432939] tda998x 0-0070: found TDA19988 <6>[ 9.481600] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1220883/environment . /lava-1220883/environment / # /lava-1220883/bin/lava-test-runner /lava-1220883/0 /lava-1220883/bin/lava-test-runner /lava-1220883/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1220883/0/tests/0_dmesg + cat uuid + UUID=1220883_1.5.2.4.1 + <8>[ 12.643376] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 12.697807] <8>[ 12.747337] <8>[ 12.797104] + set +x <8>[ 12.807631] / #