Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.11.7 (3 ms) => setenv serverip 192.168.11.5 setenv serverip 192.168.11.5 => tftp 0x82000000 1186112/tftp-deploy-e_36ftka/kernel/zImage tftp 0x82000000 1186112/tftp-deploy-e_36ftka/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.7 Filename '1186112/tftp-deploy-e_36ftka/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 5.1 MiB/s done Bytes transferred = 18997760 (121e200 hex) => tftp 0x83000000 1186112/tftp-deploy-e_36ftka/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1186112/tftp-deploy-e_36ftka/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.7 Filename '1186112/tftp-deploy-e_36ftka/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############# 5.1 MiB/s done Bytes transferred = 24991134 (17d559e hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1186112/tftp-deploy-e_36ftka/dtb/am335x-boneblack.dtb tftp 0x88000000 1186112/tftp-deploy-e_36ftka/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.7 Filename '1186112/tftp-deploy-e_36ftka/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 4.5 MiB/s done Bytes transferred = 70568 (113a8 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1186112/extract-nfsrootfs-cdm3tug2,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1186112/extract-nfsrootfs-cdm3tug2,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-08-30 8:58:48 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 24991070 Bytes = 23.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 880143a7 Starting kernel ... U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: watchdog reset has occurred. Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[A335BNLT] ... board_rev=[000C] ... Card did not respond to voltage select! Card did not respond to voltage select! Card did not respond to voltage select! gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 Card did not respond to voltage select! Card did not respond to voltage select! switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2316 bytes read in 22 ms (102.5 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.14.108-ti-r119 ... 9929216 bytes read in 645 ms (14.7 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=1] ... debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading /boot/dtbs/4.14.108-ti-r119/am335x-boneblack-uboot-univ.dtb ... 163003 bytes read in 81 ms (1.9 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... 1606 bytes read in 206 ms (6.8 KiB/s) uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ... 5049 bytes read in 306 ms (15.6 KiB/s) uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... 867 bytes read in 260 ms (2.9 KiB/s) uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo ... 3675 bytes read in 156 ms (22.5 KiB/s) loading /boot/initrd.img-4.14.108-ti-r119 ... 4640514 bytes read in 314 ms (14.1 MiB/s) debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet] ... debug: [bootz 0x82000000 0x88080000:46cf02 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fb93000, end 8fffff02 ... OK Loading Device Tree to 8fb07000, end 8fb92fff ... OK Starting kernel ... [ 0.002145] timer_probe: no matching timers found [ 0.964402] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 1.270939] omap_voltage_late_init: Voltage driver support not added [ 1.278160] PM: Cannot get wkup_m3_ipc handle [ 1.476526] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback [ 1.485509] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX Debian GNU/Linux 9 beaglebone ttyS0 BeagleBoard.org Debian Image 2019-10-01 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: