Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 DHCP client bound to address 192.168.6.31 (3847 ms) => setenv serverip 192.168.56.76 setenv serverip 192.168.56.76 => tftp 0x12000000 796761/tftp-deploy-3h3hzfn_/kernel/zImage tftp 0x12000000 796761/tftp-deploy-3h3hzfn_/kernel/zImage Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '796761/tftp-deploy-3h3hzfn_/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########## 4.7 MiB/s done Bytes transferred = 16359936 (f9a200 hex) => tftp 0x13000000 796761/tftp-deploy-3h3hzfn_/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 796761/tftp-deploy-3h3hzfn_/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '796761/tftp-deploy-3h3hzfn_/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #########T ######################################################## ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################ 2.3 MiB/s done Bytes transferred = 24556743 (176b4c7 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 796761/tftp-deploy-3h3hzfn_/dtb/imx6dl-udoo.dtb tftp 0x18000000 796761/tftp-deploy-3h3hzfn_/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '796761/tftp-deploy-3h3hzfn_/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 3.7 MiB/s done Bytes transferred = 35145 (8949 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0xf9a200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 24556679 Bytes = 23.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b948 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc1-next-20241003 (KernelCI@build-j330795-arm-gcc-12-multi-v7-defconfig-kselftest-mwqz4) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Oct 3 05:26:16 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: legacy bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49292 r8192 d24436 u81920 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 <6>[ 0.000000] allocated 1048576 bytes of page_ext <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:on <6>[ 0.000000] mem auto-init: clearing system memory may take some time... <6>[ 0.000000] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.000000] stackdepot hash table entries: 65536 (order: 7, 524288 bytes, linear) <4>[ 0.000000] ********************************************************** <4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.000000] ** ** <4>[ 0.000000] ** This system shows unhashed kernel memory addresses ** <4>[ 0.000000] ** via the console, logs, and other interfaces. This ** <4>[ 0.000000] ** might reduce the security of your system. ** <4>[ 0.000000] ** ** <4>[ 0.000000] ** If you see this message and you are not debugging ** <4>[ 0.000000] ** the kernel, report this immediately to your system ** <4>[ 0.000000] ** administrator! ** <4>[ 0.000000] ** ** <4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.000000] ********************************************************** <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] ftrace: allocating 71576 entries in 210 pages <6>[ 0.000000] ftrace: allocated 210 pages with 4 groups <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] Rude variant of Tasks RCU enabled. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008458] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.022389] Console: colour dummy device 80x30 <6>[ 0.024373] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000) <6>[ 0.034634] CPU: Testing write buffer coherency: ok <6>[ 0.039767] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.045069] pid_max: default: 32768 minimum: 301 <6>[ 0.050776] LSM: initializing lsm=capability,landlock,bpf,ima <6>[ 0.056166] landlock: Up and running. <6>[ 0.059943] LSM support for eBPF active <6>[ 0.064714] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.071522] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085181] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.093693] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.099657] rcu: Hierarchical SRCU implementation. <6>[ 0.102723] rcu: Max phase no-delay instances is 400. <6>[ 0.109384] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.131837] EFI services will not be available. <6>[ 0.134757] smp: Bringing up secondary CPUs ... <6>[ 0.141629] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.141657] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.150279] smp: Brought up 1 node, 2 CPUs <6>[ 0.154443] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.160845] CPU: All CPU(s) started in SVC mode. <6>[ 0.167581] Memory: 902504K/1048576K available (21504K kernel code, 3772K rwdata, 10404K rodata, 2048K init, 526K bss, 74972K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.183529] devtmpfs: initialized <6>[ 0.275807] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.282525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.290964] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.348002] pinctrl core: initialized pinctrl subsystem <6>[ 0.363092] DMI not present or invalid. <6>[ 0.367916] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.381465] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.391522] audit: initializing netlink subsys (disabled) <5>[ 0.395693] audit: type=2000 audit(0.255:1): state=initialized audit_enabled=0 res=1 <6>[ 0.406913] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.407195] cpuidle: using governor menu <6>[ 0.417005] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.435822] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.443749] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <4>[ 0.479911] mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator <4>[ 0.492038] mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator <6>[ 0.504993] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.516044] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.523845] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.554321] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.561920] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.571422] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.579137] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.586904] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux <6>[ 0.597453] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux <6>[ 0.618885] No ATAGs? <6>[ 0.619072] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.626883] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.644269] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.676369] Serial: AMBA PL011 UART driver <6>[ 0.683945] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <4>[ 0.700206] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.719398] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.739010] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.758745] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.778458] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.798018] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.818152] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.914545] iommu: Default domain type: Translated <6>[ 0.916785] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.940114] SCSI subsystem initialized <6>[ 0.945423] usbcore: registered new interface driver usbfs <6>[ 0.948735] usbcore: registered new interface driver hub <6>[ 0.954275] usbcore: registered new device driver usb <4>[ 0.960897] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 0.969950] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 0.984577] i2c i2c-1: IMX I2C adapter registered <6>[ 0.990279] i2c i2c-2: IMX I2C adapter registered <6>[ 0.996118] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.998525] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.008155] PTP clock support registered <6>[ 1.012981] EDAC MC: Ver: 3.0.0 <6>[ 1.018448] scmi_core: SCMI protocol bus registered <6>[ 1.033625] NET: Registered PF_ATMPVC protocol family <6>[ 1.036117] NET: Registered PF_ATMSVC protocol family <6>[ 1.042989] nfc: nfc_init: NFC Core ver 0.1 <6>[ 1.046515] NET: Registered PF_NFC protocol family <6>[ 1.051774] vgaarb: loaded <6>[ 1.056007] clocksource: Switched to clocksource mxc_timer1 <6>[ 1.135556] NET: Registered PF_INET protocol family <6>[ 1.138367] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.150152] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 1.155984] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 1.164112] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.172066] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 1.179675] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.187417] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) <6>[ 1.193998] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.200689] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.208752] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 1.218096] RPC: Registered named UNIX socket transport module. <6>[ 1.221470] RPC: Registered udp transport module. <6>[ 1.226430] RPC: Registered tcp transport module. <6>[ 1.231379] RPC: Registered tcp-with-tls transport module. <6>[ 1.237121] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.243833] NET: Registered PF_XDP protocol family <6>[ 1.248886] PCI: CLS 0 bytes, default 64 <5>[ 1.264145] Initialise system trusted keyrings <6>[ 1.267471] workingset: timestamp_bits=14 max_order=18 bucket_order=4 <6>[ 1.299512] Trying to unpack rootfs image as initramfs... <6>[ 1.302561] rootfs image is not initramfs (invalid magic at start of compressed archive); looks like an initrd <6>[ 1.320466] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.337351] NFS: Registering the id_resolver key type <5>[ 1.340164] Key type id_resolver registered <5>[ 1.344368] Key type id_legacy registered <6>[ 1.349007] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.355575] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 1.439976] Freeing initrd memory: 23984K <6>[ 1.598994] NET: Registered PF_ALG protocol family <5>[ 1.601295] Key type asymmetric registered <5>[ 1.605588] Asymmetric key parser 'x509' registered <6>[ 1.611307] bounce: pool size: 64 pages <6>[ 1.615430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) <6>[ 1.622482] io scheduler mq-deadline registered <6>[ 1.627248] io scheduler kyber registered <6>[ 1.631662] io scheduler bfq registered <4>[ 1.642614] test_firmware: interface ready <6>[ 1.746019] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.856119] mxs-dma 110000.dma-controller: initialized <6>[ 1.871220] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <6>[ 2.330498] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.368632] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 267, base_baud = 5000000) is a IMX <6>[ 2.374881] printk: legacy console [ttymxc1] enabled <6>[ 2.374881] printk: legacy console [ttymxc1] enabled <6>[ 2.385278] printk: legacy bootconsole [ec_imx21] disabled <6>[ 2.385278] printk: legacy bootconsole [ec_imx21] disabled <6>[ 2.404357] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 268, base_baud = 5000000) is a IMX <6>[ 2.418983] msm_serial: driver initialized <6>[ 2.425143] SuperH (H)SCI(F) driver initialized <6>[ 2.430849] STMicroelectronics ASC driver initialized <6>[ 2.436981] STM32 USART driver initialized <6>[ 2.466587] [drm] Initialized vgem 1.0.0 for vgem on minor 0 <6>[ 2.553022] brd: module loaded <6>[ 2.606246] loop: module loaded <6>[ 2.611432] lkdtm: No crash points registered, enable through debugfs <6>[ 2.696044] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.706235] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.711524] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.718144] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.723848] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.745875] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.752136] usbcore: registered new interface driver pegasus <6>[ 2.758382] usbcore: registered new interface driver asix <6>[ 2.764366] usbcore: registered new interface driver ax88179_178a <6>[ 2.771061] usbcore: registered new interface driver cdc_ether <6>[ 2.777489] usbcore: registered new interface driver smsc75xx <6>[ 2.783818] usbcore: registered new interface driver smsc95xx <6>[ 2.790166] usbcore: registered new interface driver net1080 <6>[ 2.796407] usbcore: registered new interface driver cdc_subset <6>[ 2.802909] usbcore: registered new interface driver zaurus <6>[ 2.809157] usbcore: registered new interface driver cdc_ncm <6>[ 2.831348] usbcore: registered new interface driver usb-storage <4>[ 2.843832] imx_usb 2184000.usb: No over current polarity defined <3>[ 3.466276] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 3.476048] imx_usb 2184200.usb: No over current polarity defined <6>[ 3.488914] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 3.494348] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 3.508001] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 3.520175] hub 1-0:1.0: USB hub found <6>[ 3.524555] hub 1-0:1.0: 1 port detected <6>[ 3.557908] i2c_dev: i2c /dev entries driver <6>[ 3.630296] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.636812] sdhci: Copyright(c) Pierre Ossman <6>[ 3.647964] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.660473] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.671442] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 3.683486] hid: raw HID events driver (C) Jiri Kosina <6>[ 3.692629] usbcore: registered new interface driver usbhid <6>[ 3.698515] usbhid: USB HID core driver <6>[ 3.720854] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <4>[ 3.721340] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. <6>[ 3.737657] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 (8000003f) counters available <6>[ 3.764054] ipip: IPv4 and MPLS over IPv4 tunneling driver <4>[ 3.769373] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 3.774000] IPv4 over IPsec tunneling driver <6>[ 3.778287] usb 1-1: new full-speed USB device number 2 using ci_hdrc <6>[ 3.786796] IPsec XFRM device driver <6>[ 3.790107] mmc2: new high speed SDXC card at address 59b4 <6>[ 3.794073] NET: Registered PF_INET6 protocol family <6>[ 3.807903] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 3.827506] Segment Routing with IPv6 <6>[ 3.832125] In-situ OAM (IOAM) with IPv6 <6>[ 3.834059] mmcblk2: p1 p2 <6>[ 3.841816] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.857487] NET: Registered PF_PACKET protocol family <6>[ 3.863087] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. <5>[ 3.878560] Key type dns_resolver registered <6>[ 3.884222] NET: Registered PF_VSOCK protocol family <6>[ 3.889621] mpls_gso: MPLS GSO support <6>[ 3.908384] ThumbEE CPU extension supported. <5>[ 3.913041] Registering SWP/SWPB emulation handler <3>[ 4.011009] usb 1-1: device descriptor read/64, error -71 <4>[ 4.073925] unwind: Index not found bf003440 <4>[ 4.078616] unwind: Index not found bf003440 <4>[ 4.083240] unwind: Index not found bf003440 <4>[ 4.087857] unwind: Index not found bf003440 <4>[ 4.092458] unwind: Index not found bf003440 <4>[ 4.097031] unwind: Index not found bf003440 <4>[ 4.101618] unwind: Index not found bf003440 <4>[ 4.106193] unwind: Index not found bf003440 <4>[ 4.110783] unwind: Index not found bf003440 <4>[ 4.115355] unwind: Index not found bf003440 <4>[ 4.119968] unwind: Index not found bf003440 <4>[ 4.124546] unwind: Index not found bf003440 <4>[ 4.129118] unwind: Index not found bf003440 <4>[ 4.133783] unwind: Index not found bf003440 <4>[ 4.138400] unwind: Index not found bf003440 <4>[ 4.142993] unwind: Index not found bf003440 <4>[ 4.147568] unwind: Index not found bf003440 <4>[ 4.152172] unwind: Index not found bf003440 <4>[ 4.156768] unwind: Index not found bf003440 <4>[ 4.161350] unwind: Index not found bf003440 <4>[ 4.165944] unwind: Index not found bf003440 <4>[ 4.170545] unwind: Index not found bf003504 <4>[ 4.175143] unwind: Index not found bf003504 <4>[ 4.179723] unwind: Index not found bf003504 <4>[ 4.184299] unwind: Index not found bf003504 <4>[ 4.188876] unwind: Index not found bf0036bc <4>[ 4.193454] unwind: Index not found bf0036bc <4>[ 4.198025] unwind: Index not found bf0036bc <4>[ 4.202603] unwind: Index not found bf0036bc <5>[ 4.207244] Loading compiled-in X.509 certificates <5>[ 4.222385] Loaded X.509 cert 'Build time autogenerated kernel key: fa60b376adbc0afa1e73a25383651b0592f397fc' <6>[ 4.331129] ima: No TPM chip found, activating TPM-bypass! <6>[ 4.337036] ima: Allocated hash algorithm: sha1 <6>[ 4.342043] ima: No architecture policies found <6>[ 4.510779] pps pps0: new PPS source ptp0 <6>[ 4.531237] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 4.542697] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <6>[ 4.622349] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <3>[ 4.668072] usb 1-1: device descriptor read/64, error -71 <6>[ 4.888128] usb 1-1: new full-speed USB device number 3 using ci_hdrc <3>[ 5.104125] usb 1-1: device descriptor read/64, error -71 <3>[ 5.424094] usb 1-1: device descriptor read/64, error -71 <6>[ 5.535537] usb usb1-port1: attempt power cycle <6>[ 5.922091] usb 1-1: new full-speed USB device number 4 using ci_hdrc <3>[ 6.407111] usb 1-1: device not accepting address 4, error -71 <6>[ 6.526059] usb 1-1: new full-speed USB device number 5 using ci_hdrc <3>[ 7.007043] usb 1-1: device not accepting address 5, error -71 <3>[ 7.014006] usb usb1-port1: unable to enumerate USB device <6>[ 7.703831] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <5>[ 7.725069] Sending DHCP requests ..., OK <6>[ 14.301552] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.31 <6>[ 14.309536] IP-Config: Complete: <6>[ 14.313056] device=eth0, hwaddr=00:c0:08:88:29:80, ipaddr=192.168.6.31, mask=255.255.255.0, gw=192.168.6.1 <6>[ 14.323440] host=192.168.6.31, domain=, nis-domain=(none) <6>[ 14.329566] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 14.329578] nameserver0=10.255.253.1 <6>[ 14.342351] clk: Disabling unused clocks <6>[ 14.346957] PM: genpd: Disabling unused power domains <5>[ 14.353802] RAMDISK: Couldn't find valid RAM disk image starting at 0. <3>[ 14.399833] ntfs3(ram0): Primary boot signature is not NTFS. <3>[ 14.405980] ntfs3(ram0): try to read out of volume at offset 0x3fffe00 <3>[ 14.414001] ntfs3(ram0): Primary boot signature is not NTFS. <3>[ 14.420101] ntfs3(ram0): try to read out of volume at offset 0x3fffe00 <4>[ 14.427908] List of all partitions: <4>[ 14.431763] 0100 65536 ram0 <4>[ 14.431777] (driver?) <4>[ 14.438530] 0101 65536 ram1 <4>[ 14.438542] (driver?) <4>[ 14.445221] 0102 65536 ram2 <4>[ 14.445231] (driver?) <4>[ 14.451920] 0103 65536 ram3 <4>[ 14.451945] (driver?) <4>[ 14.458623] 0104 65536 ram4 <4>[ 14.458632] (driver?) <4>[ 14.465320] 0105 65536 ram5 <4>[ 14.465330] (driver?) <4>[ 14.472006] 0106 65536 ram6 <4>[ 14.472017] (driver?) <4>[ 14.478705] 0107 65536 ram7 <4>[ 14.478716] (driver?) <4>[ 14.485402] 0108 65536 ram8 <4>[ 14.485413] (driver?) <4>[ 14.492097] 0109 65536 ram9 <4>[ 14.492107] (driver?) <4>[ 14.498797] 010a 65536 ram10 <4>[ 14.498806] (driver?) <4>[ 14.505593] 010b 65536 ram11 <4>[ 14.505603] (driver?) <4>[ 14.512375] 010c 65536 ram12 <4>[ 14.512386] (driver?) <4>[ 14.519150] 010d 65536 ram13 <4>[ 14.519160] (driver?) <4>[ 14.525949] 010e 65536 ram14 <4>[ 14.525959] (driver?) <4>[ 14.532725] 010f 65536 ram15 <4>[ 14.532735] (driver?) <4>[ 14.539524] b300 124835328 mmcblk2 <4>[ 14.539535] driver: mmcblk <4>[ 14.546907] b301 32768 mmcblk2p1 816d2024-01 <4>[ 14.546918] <4>[ 14.554295] b302 124801536 mmcblk2p2 816d2024-02 <4>[ 14.554307] <4>[ 14.561701] No filesystem could mount root, tried: <4>[ 14.561708] ext3 <4>[ 14.566883] ext2 <4>[ 14.569097] ext4 <4>[ 14.571309] squashfs <4>[ 14.573519] vfat <4>[ 14.576077] msdos <4>[ 14.578299] ntfs <4>[ 14.580602] ntfs3 <4>[ 14.582824] <0>[ 14.586891] Kernel panic - not syncing: VFS: Unable to mount root fs on "/dev/ram0" or unknown-block(1,0) <4>[ 14.596728] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc1-next-20241003 #1 <4>[ 14.605091] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 14.611888] Call trace: <4>[ 14.611897] unwind_backtrace from show_stack+0x18/0x1c <4>[ 14.620213] show_stack from panic+0x16c/0x404 <4>[ 14.624939] panic from mount_root_generic+0x2ac/0x2b4 <4>[ 14.630360] mount_root_generic from prepare_namespace+0x204/0x25c <4>[ 14.636815] prepare_namespace from kernel_init_freeable+0x268/0x28c <4>[ 14.643453] kernel_init_freeable from kernel_init+0x24/0x158 <4>[ 14.649492] kernel_init from ret_from_fork+0x14/0x28 <4>[ 14.654825] Exception stack(0xf0839fb0 to 0xf0839ff8) <4>[ 14.660147] 9fa0: 00000000 00000000 00000000 00000000 <4>[ 14.668593] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 14.677038] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <0>[ 14.683975] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on "/dev/ram0" or unknown-block(1,0) ]---