Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 DHCP client bound to address 192.168.6.31 (3823 ms) => setenv serverip 192.168.56.76 setenv serverip 192.168.56.76 => tftp 0x12000000 796825/tftp-deploy-jp_lzajt/kernel/zImage tftp 0x12000000 796825/tftp-deploy-jp_lzajt/kernel/zImage Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '796825/tftp-deploy-jp_lzajt/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 4.7 MiB/s done Bytes transferred = 12059136 (b80200 hex) => tftp 0x13000000 796825/tftp-deploy-jp_lzajt/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 796825/tftp-deploy-jp_lzajt/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '796825/tftp-deploy-jp_lzajt/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################## 4.7 MiB/s done Bytes transferred = 18508782 (11a6bee hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 796825/tftp-deploy-jp_lzajt/dtb/imx6dl-udoo.dtb tftp 0x18000000 796825/tftp-deploy-jp_lzajt/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '796825/tftp-deploy-jp_lzajt/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 3.4 MiB/s done Bytes transferred = 35145 (8949 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0xb80200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 18508718 Bytes = 17.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b948 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc1-next-20241003 (KernelCI@build-j330812-arm-clang-17-multi-v7-defconfig-zzxl9) (Debian clang version 17.0.6 (++20231208085813+6009708b4367-1~exp1~20231208085906.81), Debian LLD 17.0.6) #1 SMP Thu Oct 3 05:31:28 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x021e8000 (options '') [ 0.000000] printk: legacy bootconsole [ec_imx6q0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s40780 r8192 d20660 u69632 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008439] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.022454] Console: colour dummy device 80x30 <6>[ 0.024376] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.034781] CPU: Testing write buffer coherency: ok <6>[ 0.039908] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.045199] pid_max: default: 32768 minimum: 301 <6>[ 0.050234] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.057663] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.066606] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.072908] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.080042] rcu: Hierarchical SRCU implementation. <6>[ 0.083391] rcu: Max phase no-delay instances is 1000. <6>[ 0.089331] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.100460] EFI services will not be available. <6>[ 0.102682] smp: Bringing up secondary CPUs ... <6>[ 0.108337] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.108365] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.118615] smp: Brought up 1 node, 2 CPUs <6>[ 0.122766] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.129235] CPU: All CPU(s) started in SVC mode. <6>[ 0.134626] Memory: 922156K/1048576K available (17408K kernel code, 2543K rwdata, 6704K rodata, 2048K init, 432K bss, 57988K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.150362] devtmpfs: initialized <6>[ 0.161238] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.166658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.176478] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.186867] pinctrl core: initialized pinctrl subsystem <6>[ 0.193109] DMI not present or invalid. <6>[ 0.195355] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.203302] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.210966] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.211061] cpuidle: using governor menu <6>[ 0.219051] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.230640] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.237035] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <4>[ 0.253632] mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator <4>[ 0.259494] mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator <6>[ 0.269032] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.278266] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.286745] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.302580] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.309474] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.319030] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.326738] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.334454] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux <6>[ 0.345107] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux <6>[ 0.359189] No ATAGs? <6>[ 0.359346] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.367186] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.376318] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.388598] Serial: AMBA PL011 UART driver <4>[ 0.406886] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.415290] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.424414] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.433463] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.442660] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.451718] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.461000] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.536690] iommu: Default domain type: Translated <6>[ 0.538901] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.560385] SCSI subsystem initialized <6>[ 0.562131] usbcore: registered new interface driver usbfs <6>[ 0.567399] usbcore: registered new interface driver hub <6>[ 0.572903] usbcore: registered new device driver usb <4>[ 0.578490] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 0.587692] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 0.598687] i2c i2c-1: IMX I2C adapter registered <6>[ 0.602462] i2c i2c-2: IMX I2C adapter registered <6>[ 0.608119] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.611923] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.621376] PTP clock support registered <6>[ 0.625750] EDAC MC: Ver: 3.0.0 <6>[ 0.629479] scmi_core: SCMI protocol bus registered <6>[ 0.637198] vgaarb: loaded <6>[ 0.643091] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.685440] NET: Registered PF_INET protocol family <6>[ 0.687980] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.697486] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.704060] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.712017] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.720103] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.727737] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.734233] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.741015] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.748504] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.755125] RPC: Registered named UNIX socket transport module. <6>[ 0.760384] RPC: Registered udp transport module. <6>[ 0.765394] RPC: Registered tcp transport module. <6>[ 0.770301] RPC: Registered tcp-with-tls transport module. <6>[ 0.776058] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.782753] PCI: CLS 0 bytes, default 64 <5>[ 0.788762] Initialise system trusted keyrings <6>[ 0.792232] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 0.798772] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 0.804900] Trying to unpack rootfs image as initramfs... <5>[ 0.834555] NFS: Registering the id_resolver key type <5>[ 0.837109] Key type id_resolver registered <5>[ 0.841478] Key type id_legacy registered <6>[ 0.845900] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.852705] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.884110] Key type asymmetric registered <5>[ 0.885630] Asymmetric key parser 'x509' registered <6>[ 0.890860] bounce: pool size: 64 pages <6>[ 0.894964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.902508] io scheduler mq-deadline registered <6>[ 0.907342] io scheduler kyber registered <6>[ 0.911590] io scheduler bfq registered <6>[ 1.028333] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.077681] mxs-dma 110000.dma-controller: initialized <6>[ 1.211320] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.223547] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 267, base_baud = 5000000) is a IMX <6>[ 1.229721] printk: legacy console [ttymxc1] enabled <6>[ 1.229721] printk: legacy console [ttymxc1] enabled <6>[ 1.240205] printk: legacy bootconsole [ec_imx6q0] disabled <6>[ 1.240205] printk: legacy bootconsole [ec_imx6q0] disabled <6>[ 1.253527] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 268, base_baud = 5000000) is a IMX <6>[ 1.265452] msm_serial: driver initialized <6>[ 1.270495] SuperH (H)SCI(F) driver initialized <6>[ 1.275977] STMicroelectronics ASC driver initialized <6>[ 1.281507] STM32 USART driver initialized <6>[ 1.355298] brd: module loaded <6>[ 1.366613] loop: module loaded <6>[ 1.393544] CAN device driver interface <6>[ 1.399459] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.407610] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.412851] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.419148] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.424854] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.438080] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.444025] usbcore: registered new interface driver pegasus <6>[ 1.450003] usbcore: registered new interface driver asix <6>[ 1.455748] usbcore: registered new interface driver ax88179_178a <6>[ 1.462149] usbcore: registered new interface driver cdc_ether <6>[ 1.468365] usbcore: registered new interface driver smsc75xx <6>[ 1.474532] usbcore: registered new interface driver smsc95xx <6>[ 1.480616] usbcore: registered new interface driver net1080 <6>[ 1.486690] usbcore: registered new interface driver cdc_subset <6>[ 1.492963] usbcore: registered new interface driver zaurus <6>[ 1.498916] usbcore: registered new interface driver cdc_ncm <6>[ 1.511791] usbcore: registered new interface driver usb-storage <4>[ 1.521131] imx_usb 2184000.usb: No over current polarity defined <3>[ 2.217048] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 2.224712] imx_usb 2184200.usb: No over current polarity defined <6>[ 2.235907] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 2.241134] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 2.273173] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 2.280149] hub 1-0:1.0: USB hub found <6>[ 2.284319] hub 1-0:1.0: 1 port detected <6>[ 2.300240] i2c_dev: i2c /dev entries driver <6>[ 2.334476] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.340943] sdhci: Copyright(c) Pierre Ossman <6>[ 2.349330] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.358722] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.373024] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 2.379949] usbcore: registered new interface driver usbhid <6>[ 2.385876] usbhid: USB HID core driver <4>[ 2.398395] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. <6>[ 2.407770] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 (8000003f) counters available <6>[ 2.433175] NET: Registered PF_INET6 protocol family <6>[ 2.440679] Segment Routing with IPv6 <6>[ 2.444809] In-situ OAM (IOAM) with IPv6 <6>[ 2.449122] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.456214] NET: Registered PF_PACKET protocol family <6>[ 2.461560] can: controller area network core <6>[ 2.466319] NET: Registered PF_CAN protocol family <6>[ 2.471406] can: raw protocol <6>[ 2.474691] can: broadcast manager protocol <6>[ 2.479171] can: netlink gateway - max_hops=1 <5>[ 2.484479] Key type dns_resolver registered <6>[ 2.491588] ThumbEE CPU extension supported. <5>[ 2.496330] Registering SWP/SWPB emulation handler <5>[ 2.512871] Loading compiled-in X.509 certificates <6>[ 2.544750] pps pps0: new PPS source ptp0 <6>[ 2.573172] usb 1-1: new full-speed USB device number 2 using ci_hdrc <6>[ 2.578473] Freeing initrd memory: 18076K <6>[ 2.584493] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <6>[ 2.623429] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 2.624379] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 2.639213] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <4>[ 2.691726] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 2.702356] mmc2: new high speed SDXC card at address 59b4 <6>[ 2.709003] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 2.716947] mmcblk2: p1 p2 <6>[ 2.726390] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <3>[ 2.833167] usb 1-1: device descriptor read/64, error -71 <3>[ 3.163134] usb 1-1: device descriptor read/64, error -71 <6>[ 3.403132] usb 1-1: new full-speed USB device number 3 using ci_hdrc <3>[ 3.633218] usb 1-1: device descriptor read/64, error -71 <3>[ 3.963153] usb 1-1: device descriptor read/64, error -71 <6>[ 4.073333] usb usb1-port1: attempt power cycle <6>[ 4.493197] usb 1-1: new full-speed USB device number 4 using ci_hdrc <3>[ 4.973210] usb 1-1: device not accepting address 4, error -71 <6>[ 5.103136] usb 1-1: new full-speed USB device number 5 using ci_hdrc <3>[ 5.583121] usb 1-1: device not accepting address 5, error -71 <3>[ 5.589361] usb usb1-port1: unable to enumerate USB device <6>[ 5.873933] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <5>[ 5.913161] Sending DHCP requests ..., OK <6>[ 13.377609] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.31 <6>[ 13.385653] IP-Config: Complete: <6>[ 13.389165] device=eth0, hwaddr=00:c0:08:88:29:80, ipaddr=192.168.6.31, mask=255.255.255.0, gw=192.168.6.1 <6>[ 13.399632] host=192.168.6.31, domain=, nis-domain=(none) <6>[ 13.405801] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 13.405827] nameserver0=10.255.253.1 <6>[ 13.417723] clk: Disabling unused clocks <6>[ 13.422363] PM: genpd: Disabling unused power domains <6>[ 13.431898] Freeing unused kernel image (initmem) memory: 2048K <6>[ 13.438802] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 13.592626] udevd[93]: starting version 3.2.9 <5>[ 19.043085] random: crng init done <27>[ 19.055089] udevd[93]: specified user 'tss' unknown <27>[ 19.060463] udevd[93]: specified group 'tss' unknown <30>[ 19.069660] udevd[94]: starting eudev-3.2.9 <6>[ 19.680996] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 19.719677] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) <6>[ 19.765378] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 19.772341] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 19.833538] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 <6>[ 19.860870] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 19.882068] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 0 <6>[ 19.890458] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops cleanup_module [imxdrm]) <6>[ 19.913969] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops cleanup_module [imxdrm]) <6>[ 19.922708] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) <6>[ 19.941936] [drm] Initialized imx-drm 1.0.0 for display-subsystem on minor 1 <4>[ 19.946663] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW <6>[ 19.949473] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 19.964458] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 19.977542] caam 2100000.crypto: Entropy delay = 3200 <6>[ 19.995443] caam 2100000.crypto: Instantiated RNG4 SH0 <6>[ 20.007920] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 20.013361] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) <6>[ 20.020258] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 20.197510] usbcore: registered new device driver onboard-usb-dev <4>[ 20.223411] onboard-usb-dev 2184200.usb:usb-port@1: supply vdd not found, using dummy regulator <6>[ 20.573205] usb 1-1: new high-speed USB device number 6 using ci_hdrc <6>[ 20.799947] hub 1-1:1.0: USB hub found <6>[ 20.806138] hub 1-1:1.0: 4 ports detected <6>[ 20.844202] caam algorithms registered in /proc/crypto <6>[ 20.849893] caam 2100000.crypto: registering rng-caam <6>[ 20.856731] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # <6>[ 21.113196] usb 1-1.3: new high-speed USB device number 7 using ci_hdrc # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-796825/environment . /lava-796825/environment / # /lava-796825/bin/lava-test-runner /lava-796825/0 /lava-796825/bin/lava-test-runner /lava-796825/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-796825/0/tests/0_dmesg + cat uuid + UUID=796825_1.5.2.4.1 <8>[ 21.609173] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 21.662213] <8>[ 21.708024] <8>[ 21.753874] + set +x <8>[ 21.764529] / #