Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.189 (43 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1213846/tftp-deploy-km0nhpwx/kernel/zImage tftp 0x82000000 1213846/tftp-deploy-km0nhpwx/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.189 Filename '1213846/tftp-deploy-km0nhpwx/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 5.2 MiB 3.8 MiB/s done Bytes transferred = 5424520 (52c588 hex) => tftp 0x83000000 1213846/tftp-deploy-km0nhpwx/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1213846/tftp-deploy-km0nhpwx/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.189 Filename '1213846/tftp-deploy-km0nhpwx/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 15 MiB 3.7 MiB/s done Bytes transferred = 15733005 (f0110d hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1213846/tftp-deploy-km0nhpwx/dtb/am335x-boneblack.dtb tftp 0x88000000 1213846/tftp-deploy-km0nhpwx/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.189 Filename '1213846/tftp-deploy-km0nhpwx/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 68.9 KiB 3.4 MiB/s done Bytes transferred = 70544 (11390 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x52c588 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-10-30 11:54:14 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 15732941 Bytes = 15 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801438f Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc5-next-20241030 (KernelCI@build-j357173-arm-gcc-12-omap2plus-defconfig-4tpcp) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Oct 30 11:32:21 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: legacy bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 17 pages/cpu s40012 r8192 d21428 u69632 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] printk: log buffer data + meta data: 65536 + 204800 = 270336 bytes <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000003] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008344] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018635] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030340] Console: colour dummy device 80x30 <3>[ 0.035243] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042337] This ensures that you still see kernel messages. Please <3>[ 0.049074] update your kernel commandline. <6>[ 0.053685] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095660] CPU: Testing write buffer coherency: ok <6>[ 0.101049] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106520] pid_max: default: 32768 minimum: 301 <6>[ 0.111673] LSM: initializing lsm=capability <6>[ 0.116511] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124354] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134232] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.209255] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.216578] rcu: Hierarchical SRCU implementation. <6>[ 0.221839] rcu: Max phase no-delay instances is 1000. <6>[ 0.228618] smp: Bringing up secondary CPUs ... <6>[ 0.233668] smp: Brought up 1 node, 1 CPU <6>[ 0.238072] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.244837] CPU: All CPU(s) started in SVC mode. <6>[ 0.250055] Memory: 466632K/522240K available (11264K kernel code, 1163K rwdata, 2732K rodata, 1024K init, 292K bss, 37596K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.266542] devtmpfs: initialized <6>[ 0.285043] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.293698] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.304175] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.312816] pinctrl core: initialized pinctrl subsystem <6>[ 0.321083] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.330374] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.338290] audit: initializing netlink subsys (disabled) <6>[ 0.345518] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.345542] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.352181] thermal_sys: Registered thermal governor 'user_space' <5>[ 0.358759] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1 <6>[ 0.373649] cpuidle: using governor menu <6>[ 0.400229] No ATAGs? <6>[ 0.402875] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.411956] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.442375] iommu: Default domain type: Translated <6>[ 0.447599] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.469747] SCSI subsystem initialized <6>[ 0.479814] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.485205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.494952] PTP clock support registered <6>[ 0.529005] vgaarb: loaded <6>[ 0.532451] clocksource: Switched to clocksource dmtimer <5>[ 0.539015] VFS: Disk quotas dquot_6.6.0 <6>[ 0.543427] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.591983] NET: Registered PF_INET protocol family <6>[ 0.597747] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.606860] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.615819] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.624110] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 0.632386] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 0.640116] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.647067] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.654111] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.661729] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.747188] RPC: Registered named UNIX socket transport module. <6>[ 0.753654] RPC: Registered udp transport module. <6>[ 0.758767] RPC: Registered tcp transport module. <6>[ 0.763899] RPC: Registered tcp-with-tls transport module. <6>[ 0.769813] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.776749] PCI: CLS 0 bytes, default 64 <5>[ 0.782580] Initialise system trusted keyrings <6>[ 0.799367] Trying to unpack rootfs image as initramfs... <6>[ 0.873638] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 0.882068] NFS: Registering the id_resolver key type <5>[ 0.887789] Key type id_resolver registered <5>[ 0.892374] Key type id_legacy registered <6>[ 0.896871] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 0.975200] Key type asymmetric registered <5>[ 0.979731] Asymmetric key parser 'x509' registered <6>[ 0.985252] io scheduler mq-deadline registered <6>[ 0.990194] io scheduler kyber registered <6>[ 0.994742] io scheduler bfq registered <6>[ 1.065018] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.093498] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 1.193615] brd: module loaded <6>[ 1.243572] loop: module loaded <3>[ 1.248078] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 1.275946] i2c_dev: i2c /dev entries driver <5>[ 1.281510] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 1.289371] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.296086] sdhci: Copyright(c) Pierre Ossman <6>[ 1.301027] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.308219] Initializing XFRM netlink socket <6>[ 1.313103] NET: Registered PF_INET6 protocol family <6>[ 1.433294] Segment Routing with IPv6 <6>[ 1.437454] In-situ OAM (IOAM) with IPv6 <6>[ 1.441861] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.449341] NET: Registered PF_PACKET protocol family <6>[ 1.454950] NET: Registered PF_KEY protocol family <5>[ 1.460288] Key type dns_resolver registered <6>[ 1.465274] ThumbEE CPU extension supported. <5>[ 1.469963] Registering SWP/SWPB emulation handler <3>[ 1.475676] omap_voltage_late_init: Voltage driver support not added <6>[ 1.482936] SmartReflex Class3 initialized <5>[ 1.643478] Loading compiled-in X.509 certificates <6>[ 1.752262] platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/clkout2-pins <6>[ 1.768127] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <3>[ 1.779179] ti-sysc 44e31000.target-module: probe with driver ti-sysc failed with error -16 <3>[ 1.894727] ti-sysc 48040000.target-module: probe with driver ti-sysc failed with error -16 <6>[ 1.973804] OMAP GPIO hardware version 0.1 <6>[ 2.034614] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <3>[ 2.081709] 48000000.interconnect:segment@200000:target-module@0:mpu@0:fck: device ID is greater than 24 <6>[ 2.096120] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <4>[ 2.120410] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 2.153403] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 2.224037] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 2.992224] Freeing initrd memory: 15368K <6>[ 3.054169] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.064611] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 3.071886] cpsw-switch 4a100000.switch: ALE Table size 1024, Policers 0 <6>[ 3.079501] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 3.087660] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 3.099338] cpsw-switch 4a100000.switch: Detected MACID = 04:79:b7:e7:06:e0 <5>[ 3.108572] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 3.129794] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.138446] edma 49000000.dma: TI EDMA DMA engine driver <3>[ 3.163328] target-module@4b000000:target-module@140000:pmu@0:fck: device ID is greater than 24 <6>[ 3.174774] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 (8000000f) counters available <3>[ 3.192286] l3-aon-clkctrl:0000:0: failed to disable <6>[ 3.201173] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 34, base_baud = 3000000) is a 8250 <6>[ 3.210685] printk: legacy console [ttyS0] enabled <6>[ 3.210685] printk: legacy console [ttyS0] enabled <6>[ 3.221041] printk: legacy bootconsole [omap8250] disabled <6>[ 3.221041] printk: legacy bootconsole [omap8250] disabled <4>[ 3.253495] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 3.259814] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 3.271283] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 3.277684] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 3.291405] i2c 0-0070: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 3.303074] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 3.312794] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 3.321814] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 3.327119] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 3.337481] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 3.348090] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.357522] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.395118] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 3.404521] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 3.413571] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 3.470494] mmc1: new high speed MMC card at address 0001 <6>[ 3.477619] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 3.485649] mmcblk1: p1 <6>[ 3.489679] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 3.500837] mmcblk1boot0: mmc1:0001 M62704 2.00 MiB <6>[ 3.508376] mmcblk1boot1: mmc1:0001 M62704 2.00 MiB <6>[ 3.521532] mmcblk1rpmb: mmc1:0001 M62704 512 KiB, chardev (250:0) <6>[ 5.633295] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <5>[ 5.672462] Sending DHCP requests ., OK <6>[ 5.736702] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.189 <6>[ 5.744646] IP-Config: Complete: <6>[ 5.748155] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.189, mask=255.255.255.0, gw=172.16.3.3 <6>[ 5.758527] host=172.16.3.189, domain=denx.de, nis-domain=(none) <6>[ 5.765289] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 5.765302] nameserver0=172.16.3.3 <6>[ 5.776613] ntpserver0=172.16.3.3 <6>[ 5.781206] clk: Disabling unused clocks <6>[ 5.785687] PM: genpd: Disabling unused power domains <6>[ 5.793332] Freeing unused kernel image (initmem) memory: 1024K <6>[ 5.800227] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.061551] udevd[98]: starting version 3.2.9 <5>[ 8.452466] random: crng init done <27>[ 8.467822] udevd[98]: specified user 'tss' unknown <27>[ 8.473663] udevd[98]: specified group 'tss' unknown <30>[ 8.493230] udevd[99]: starting eudev-3.2.9 <4>[ 9.205863] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 9.265771] usbcore: registered new interface driver usbfs <6>[ 9.271696] usbcore: registered new interface driver hub <6>[ 9.277652] usbcore: registered new device driver usb <6>[ 9.287856] remoteproc remoteproc0: wkup_m3 is available <4>[ 9.531531] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 9.571821] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 9.592727] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 9.603326] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 9.608776] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <4>[ 9.671111] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 9.722833] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 9.728515] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <4>[ 9.737049] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 9.793370] at24 2-0056: supply vcc not found, using dummy regulator <6>[ 9.854529] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 9.888416] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 9.952899] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 <6>[ 9.961525] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.969173] usb usb1: Product: MUSB HDRC host driver <6>[ 9.974462] usb usb1: Manufacturer: Linux 6.12.0-rc5-next-20241030 musb-hcd <6>[ 9.981722] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 10.014257] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 10.024849] tda998x 0-0070: found TDA19988 <6>[ 10.262785] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 10.302708] hub 1-0:1.0: USB hub found <6>[ 10.371498] hub 1-0:1.0: 1 port detected <6>[ 10.530904] remoteproc remoteproc0: powering up wkup_m3 <4>[ 10.564497] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 10.574528] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 10.580755] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 10.634142] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_audio_codec_init [tda998x]) <6>[ 10.656447] omap_rng 48310000.rng: Random Number Generator ver. 20 <6>[ 10.691144] [drm] Initialized tilcdc 1.0.0 for 4830e000.lcdc on minor 0 <6>[ 10.752629] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.883531] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <3>[ 10.957315] PM: Cannot get wkup_m3_ipc handle <6>[ 10.979605] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 11.025725] omap-sham 53100000.sham: will run requests pump with realtime priority <3>[ 11.043382] PM: Cannot get wkup_m3_ipc handle <6>[ 11.059941] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 11.108583] PM: Cannot get wkup_m3_ipc handle <6>[ 11.145613] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 11.941676] PM: Cannot get wkup_m3_ipc handle <3>[ 11.991194] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1213846/environment . /lava-1213846/environment / # /lava-1213846/bin/lava-test-runner /lava-1213846/0 /lava-1213846/bin/lava-test-runner /lava-1213846/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1213846/0/tests/0_dmesg + cat uuid + UUID=1213846_1.5.2.4.1 <8>[ 13.026489] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 13.101933] <8>[ 13.170856] <8>[ 13.239861] + set +x <8>[ 13.251593] / #