connecting to NetworkSerialPort(target=Target(name='tegra124-jetson-tk1', env=None), name='default', state=, avail=True, host='nuc-1', port=39083, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t nuc-1:39083 connected to 192.168.0.1 (port 39083) Escape character: Ctrl-\ Type the escape character to get to the prompt. U-Boot SPL 2015.10 (Dec 03 2015 - 13:25:02) U-Boot 2015.10 (Dec 03 2015 - 13:25:02 -0800) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 tegra-pcie: PCI regions: tegra-pcie: I/O: 0x12000000-0x12010000 tegra-pcie: non-prefetchable memory: 0x13000000-0x20000000 tegra-pcie: prefetchable memory: 0x20000000-0x40000000 tegra-pcie: 2x1, 1x1 configuration tegra-pcie: probing port 0, using 2 lanes tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, ignoring tegra-pcie: probing port 1, using 1 lanes In: serial Out: serial Err: serial Net: RTL8169#0 Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # setenv autoload no Tegra124 (Jetson TK1) # setenv initrd_high 0xffffffff Tegra124 (Jetson TK1) # setenv fdt_high 0xffffffff Tegra124 (Jetson TK1) # dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.0.212 (8 ms) Tegra124 (Jetson TK1) # setenv serverip 192.168.0.2 Tegra124 (Jetson TK1) # tftp 0x81000000 3906169/tftp-deploy-rhojx23k/kernel/zImage Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '3906169/tftp-deploy-rhojx23k/kernel/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################## 2.8 MiB/s done Bytes transferred = 10846720 (a58200 hex) Tegra124 (Jetson TK1) # tftp 0x82800000 3906169/tftp-deploy-rhojx23k/ramdisk/ramdisk.cpio.gz.uboot Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '3906169/tftp-deploy-rhojx23k/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x82800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################## 3 MiB/s done Bytes transferred = 17548049 (10bc311 hex) Tegra124 (Jetson TK1) # setenv initrd_size ${filesize} Tegra124 (Jetson TK1) # tftp 0x83f80000 3906169/tftp-deploy-rhojx23k/dtb/tegra124-jetson-tk1.dtb Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '3906169/tftp-deploy-rhojx23k/dtb/tegra124-jetson-tk1.dtb'. Load address: 0x83f80000 Loading: *###### 2.9 MiB/s done Bytes transferred = 73434 (11eda hex) Tegra124 (Jetson TK1) # setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' Tegra124 (Jetson TK1) # bootz 0x81000000 0x82800000 0x83f80000 Kernel image @ 0x81000000 [ 0x000000 - 0xa58200 ] ## Loading init Ramdisk from Legacy Image at 82800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17547985 Bytes = 16.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83f80000 Booting using the fdt blob at 0x83f80000 Using Device Tree in place at 83f80000, end 83f94ed9 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc5-next-20241101 (KernelCI@build-j359056-arm-gcc-12-multi-v7-defconfig-config-thumb2-vxhsm) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Fri Nov 1 09:10:48 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=50c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] earlycon: uart0 at MMIO 0x70006300 (options '115200n8') [ 0.000000] printk: legacy bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000b0000000-0x00000000ffefffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffefffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffefffff] [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] percpu: Embedded 17 pages/cpu s40204 r8192 d21236 u69632 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp <6>[ 0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524032 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] clocksource: tegra_suspend_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.000000] arch_timer: cp15 timer(s) running at 12.00MHz (virt). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns <6>[ 0.000001] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns <6>[ 0.008582] Switching to timer-based delay loop, resolution 83ns <6>[ 0.015583] Console: colour dummy device 80x30 <6>[ 0.020515] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) <6>[ 0.031545] CPU: Testing write buffer coherency: ok <6>[ 0.036917] CPU0: Spectre v2: using ICIALLU workaround <6>[ 0.042530] CPU0: Spectre BHB: enabling loop workaround for all CPUs <6>[ 0.049387] pid_max: default: 32768 minimum: 301 <6>[ 0.054602] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.062459] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <3>[ 0.071593] /cpus/cpu@0 missing clock-frequency property <3>[ 0.077413] /cpus/cpu@1 missing clock-frequency property <3>[ 0.083253] /cpus/cpu@2 missing clock-frequency property <3>[ 0.089071] /cpus/cpu@3 missing clock-frequency property <6>[ 0.094874] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.102122] Setting up static identity map for 0x80300000 - 0x803000a0 <6>[ 0.111444] rcu: Hierarchical SRCU implementation. <6>[ 0.116681] rcu: Max phase no-delay instances is 1000. <6>[ 0.122693] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.133672] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 <6>[ 0.142650] EFI services will not be available. <6>[ 0.147924] smp: Bringing up secondary CPUs ... <6>[ 0.153641] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <3>[ 0.153660] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.170768] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <3>[ 0.170787] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.187932] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <3>[ 0.187951] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.204337] smp: Brought up 1 node, 4 CPUs <6>[ 0.208882] SMP: Total of 4 processors activated (96.00 BogoMIPS). <6>[ 0.215562] CPU: All CPU(s) started in SVC mode. <6>[ 0.221295] Memory: 1967932K/2096128K available (11264K kernel code, 2545K rwdata, 6824K rodata, 2048K init, 429K bss, 59400K reserved, 65536K cma-reserved, 1244160K highmem) <6>[ 0.238158] devtmpfs: initialized <6>[ 0.259167] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 <6>[ 0.267622] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.278124] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.287025] pinctrl core: initialized pinctrl subsystem <6>[ 0.296553] DMI not present or invalid. <6>[ 0.301559] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.310258] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.321406] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.321467] cpuidle: using governor menu <6>[ 0.345364] platform 70000868.pinmux: Fixed dependency cycle(s) with /pinmux@70000868/pinmux <6>[ 0.380660] No ATAGs? <6>[ 0.383440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.392030] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.414771] Serial: AMBA PL011 UART driver <3>[ 0.420679] tegra-mc 70019000.memory-controller: ppcsahbslvr: secure read @0x7fd41100: EMEM address decode error (EMEM decode error) <6>[ 0.451434] iommu: Default domain type: Translated <6>[ 0.456719] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.465045] SCSI subsystem initialized <6>[ 0.469696] usbcore: registered new interface driver usbfs <6>[ 0.475704] usbcore: registered new interface driver hub <6>[ 0.481556] usbcore: registered new device driver usb <6>[ 0.488795] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.494241] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.504009] PTP clock support registered <6>[ 0.508557] EDAC MC: Ver: 3.0.0 <6>[ 0.512456] scmi_core: SCMI protocol bus registered <6>[ 0.520282] vgaarb: loaded <6>[ 0.532509] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.554193] NET: Registered PF_INET protocol family <6>[ 0.559733] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.569216] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.578201] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.586533] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.594938] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.603036] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.609972] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.617169] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.624933] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.631556] RPC: Registered named UNIX socket transport module. <6>[ 0.638001] RPC: Registered udp transport module. <6>[ 0.643165] RPC: Registered tcp transport module. <6>[ 0.648322] RPC: Registered tcp-with-tls transport module. <6>[ 0.654294] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.661260] PCI: CLS 0 bytes, default 64 <5>[ 0.666965] Initialise system trusted keyrings <6>[ 0.672098] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 0.679304] Trying to unpack rootfs image as initramfs... <6>[ 0.679533] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.692027] NFS: Registering the id_resolver key type <5>[ 0.697614] Key type id_resolver registered <5>[ 0.702238] Key type id_legacy registered <6>[ 0.706718] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.713969] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.722331] Key type asymmetric registered <5>[ 0.726887] Asymmetric key parser 'x509' registered <6>[ 0.732368] bounce: pool size: 64 pages <6>[ 0.736691] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.744681] io scheduler mq-deadline registered <6>[ 0.749667] io scheduler kyber registered <6>[ 0.754153] io scheduler bfq registered <4>[ 0.783946] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.811724] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 0.840987] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver registered 32 channels <6>[ 0.854212] tegra-pmc 7000e400.pmc: emergency thermal reset enabled <6>[ 0.930065] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 0.942469] printk: legacy console [ttyS0] disabled <6>[ 0.948246] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 70, base_baud = 25500000) is a Tegra <6>[ 0.957807] printk: legacy console [ttyS0] enabled <6>[ 0.957807] printk: legacy console [ttyS0] enabled <6>[ 0.968084] printk: legacy bootconsole [uart0] disabled <6>[ 0.968084] printk: legacy bootconsole [uart0] disabled <6>[ 0.981333] msm_serial: driver initialized <6>[ 0.986188] SuperH (H)SCI(F) driver initialized <6>[ 0.991357] STMicroelectronics ASC driver initialized <6>[ 0.996860] STM32 USART driver initialized <6>[ 1.002359] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 71, base_baud = 0) is a TEGRA_UART <6>[ 1.012401] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 72, base_baud = 0) is a TEGRA_UART <6>[ 1.025961] tegra-host1x 50000000.host1x: Adding to iommu group 0 <6>[ 1.042856] tegra-vic 54340000.vic: Adding to iommu group 1 <6>[ 1.062307] brd: module loaded <6>[ 1.072450] loop: module loaded <3>[ 1.128305] spi spi1.0: Invalid delay unit 2, should be SPI_DELAY_UNIT_SCK <3>[ 1.135492] spi-tegra114 7000da00.spi: can't setup spi1.0, status -22 <3>[ 1.142196] spi_master spi1: spi_device register error /spi@7000da00/flash@0 <4>[ 1.149559] spi_master spi1: Failed to create SPI device for /spi@7000da00/flash@0 <6>[ 1.163715] CAN device driver interface <6>[ 1.169161] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.176604] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.181827] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.188066] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.193746] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.205466] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.211337] usbcore: registered new interface driver pegasus <6>[ 1.217302] usbcore: registered new interface driver asix <6>[ 1.223007] usbcore: registered new interface driver ax88179_178a <6>[ 1.229397] usbcore: registered new interface driver cdc_ether <6>[ 1.235539] usbcore: registered new interface driver smsc75xx <6>[ 1.241577] usbcore: registered new interface driver smsc95xx <6>[ 1.247642] usbcore: registered new interface driver net1080 <6>[ 1.253608] usbcore: registered new interface driver cdc_subset <6>[ 1.259823] usbcore: registered new interface driver zaurus <6>[ 1.265706] usbcore: registered new interface driver cdc_ncm <4>[ 1.272185] tegra-phy 7d000000.usb-phy: supply vbus not found, using dummy regulator <4>[ 1.280666] tegra-phy 7d004000.usb-phy: supply vbus not found, using dummy regulator <6>[ 1.294101] usbcore: registered new interface driver usb-storage <6>[ 1.365407] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 1.370573] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 1.432536] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.10 <6>[ 1.439104] hub 1-0:1.0: USB hub found <6>[ 1.443188] hub 1-0:1.0: 1 port detected <6>[ 1.453516] tegra_rtc 7000e000.rtc: registered as rtc1 <5>[ 1.458924] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock <6>[ 1.466109] i2c_dev: i2c /dev entries driver <4>[ 1.476793] at24 0-0056: supply vcc not found, using dummy regulator <6>[ 1.484566] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write <6>[ 1.526938] i2c 4-0040: Fixed dependency cycle(s) with /i2c@7000d000/pmic@40/pinmux <6>[ 1.535881] as3722 4-0040: AS3722 with revision 0x1 found <6>[ 1.552386] as3722-rtc as3722-rtc: registered as rtc0 <6>[ 1.558600] as3722-rtc as3722-rtc: setting system clock to 2000-01-01T00:00:16 UTC (946684816) <6>[ 1.567522] as3722-rtc as3722-rtc: RTC interrupt 101 <6>[ 1.576075] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV <6>[ 1.586687] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV <4>[ 1.587073] lm90 0-004c: supply vcc not found, using dummy regulator <6>[ 1.594764] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV <6>[ 1.607782] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV <6>[ 1.614546] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV <6>[ 1.614877] hwmon hwmon0: temp1_input not attached to any thermal zone <3>[ 1.621909] +VDDIO_SDMMC3: bypassed regulator has no supply! <6>[ 1.628155] hwmon hwmon0: temp2_input not attached to any thermal zone <3>[ 1.633947] as3722-regulator as3722-regulator: regulator 13 register failed -517 <6>[ 1.655081] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.661524] sdhci: Copyright(c) Pierre Ossman <6>[ 1.668640] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.677095] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.688548] usbcore: registered new interface driver usbhid <6>[ 1.692937] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 1.694409] usbhid: USB HID core driver <6>[ 1.699403] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 1.709391] tegra-emc 7001b000.external-memory-controller: 64bit DRAM bus <6>[ 1.718731] tegra-emc 7001b000.external-memory-controller: OPP HW ver. 0x2, current clock rate 924 MHz <4>[ 1.730331] mmc1: Invalid maximum block size, assuming 512 bytes <6>[ 1.743138] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 (8000003f) counters available <6>[ 1.755957] NET: Registered PF_INET6 protocol family <6>[ 1.762293] Segment Routing with IPv6 <6>[ 1.766326] In-situ OAM (IOAM) with IPv6 <6>[ 1.770591] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.777506] NET: Registered PF_PACKET protocol family <6>[ 1.782855] can: controller area network core <6>[ 1.787514] NET: Registered PF_CAN protocol family <6>[ 1.792593] can: raw protocol <6>[ 1.795827] can: broadcast manager protocol <6>[ 1.800277] can: netlink gateway - max_hops=1 <5>[ 1.805354] Key type dns_resolver registered <6>[ 1.811421] ThumbEE CPU extension supported. <5>[ 1.815998] Registering SWP/SWPB emulation handler <5>[ 1.834828] Loading compiled-in X.509 certificates <6>[ 1.890313] tegra-dc 54200000.dc: Adding to iommu group 1 <4>[ 1.896043] Failed to attached device 54200000.dc to IOMMU_mapping <6>[ 1.904255] tegra-dc 54240000.dc: Adding to iommu group 1 <3>[ 1.905302] as3722 4-0040: Failed to create device link (0x180) with regulator-3v3run <4>[ 1.909966] Failed to attached device 54240000.dc to IOMMU_mapping <6>[ 1.926572] reg-fixed-voltage regulator-12v0sata: nonexclusive access to GPIO for (default) <6>[ 1.953618] ci_hdrc ci_hdrc.2: EHCI Host Controller <6>[ 1.958787] ci_hdrc ci_hdrc.2: new USB bus registered, assigned bus number 2 <6>[ 1.982645] ci_hdrc ci_hdrc.2: USB 2.0 started, EHCI 1.10 <6>[ 1.989200] hub 2-0:1.0: USB hub found <6>[ 1.993333] hub 2-0:1.0: 1 port detected <6>[ 2.006170] tegra-pcie 1003000.pcie: host bridge /pcie@1003000 ranges: <6>[ 2.013048] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000 <4>[ 2.014170] as3722-regulator as3722-regulator: DMA mask not set <6>[ 2.021434] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000 <6>[ 2.031641] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 2.035988] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000 <6>[ 2.040991] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 2.049304] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000 <6>[ 2.054686] Freeing initrd memory: 17140K <6>[ 2.062803] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration <3>[ 2.062965] +VDDIO_SDMMC3: bypassed regulator has no supply! <6>[ 2.063579] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV <6>[ 2.064347] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV <6>[ 2.065322] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV <6>[ 2.066069] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV <3>[ 2.105117] tegra-pcie 1003000.pcie: failed to get PHY#0: -517 <3>[ 2.111221] tegra-pcie 1003000.pcie: failed to get PHYs: -517 <3>[ 2.117254] tegra-pcie 1003000.pcie: failed to request resources: -517 <6>[ 2.139866] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 696000 kHz, changing to: 714000 kHz <4>[ 2.152710] usb2-0: supply vbus not found, using dummy regulator <6>[ 2.155114] mmc1: SDHCI controller on 700b0600.mmc [700b0600.mmc] using ADMA 64-bit <4>[ 2.159188] usb2-1: supply vbus not found, using dummy regulator <6>[ 2.176130] tegra-pcie 1003000.pcie: host bridge /pcie@1003000 ranges: <6>[ 2.176919] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 2.182976] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000 <6>[ 2.187916] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 2.196223] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000 <6>[ 2.196252] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000 <6>[ 2.217884] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000 <6>[ 2.226327] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration <4>[ 2.232590] mmc0: Invalid maximum block size, assuming 512 bytes <6>[ 2.240209] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes <6>[ 2.248752] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes <6>[ 2.264931] mmc1: new high speed MMC card at address 0001 <6>[ 2.270985] mmcblk1: mmc1:0001 SEM16G 14.7 GiB <6>[ 2.278706] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 <6>[ 2.284137] mmc0: SDHCI controller on 700b0400.mmc [700b0400.mmc] using ADMA 64-bit <6>[ 2.285965] mmcblk1boot0: mmc1:0001 SEM16G 4.00 MiB <6>[ 2.298173] mmcblk1boot1: mmc1:0001 SEM16G 4.00 MiB <6>[ 2.304182] mmcblk1rpmb: mmc1:0001 SEM16G 4.00 MiB, chardev (236:0) <6>[ 2.718270] mmc0: new high speed SD card at address 0260 <6>[ 2.724951] mmcblk0: mmc0:0260 1232 961 MiB <6>[ 2.733094] mmcblk0: p1 p2 <6>[ 3.462569] tegra-pcie 1003000.pcie: link 0 down, ignoring <6>[ 3.472967] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 <6>[ 3.479496] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 3.485261] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01001fff] <6>[ 3.492406] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] <6>[ 3.498899] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] <6>[ 3.506072] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] <6>[ 3.514187] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 PCIe Root Port <4>[ 3.521765] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits <6>[ 3.531734] pci 0000:00:02.0: PCI bridge to [bus 00] <6>[ 3.537010] pci 0000:00:02.0: bridge window [io 0x0000-0x0fff] <6>[ 3.543437] pci 0000:00:02.0: enabling Extended Tags <6>[ 3.548743] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 3.559529] PCI: bus0: Fast back to back transfers disabled <6>[ 3.565404] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring <6>[ 3.573923] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint <6>[ 3.581439] pci 0000:01:00.0: BAR 0 [io 0x0000-0x00ff] <6>[ 3.587002] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00000fff 64bit] <6>[ 3.593782] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] <6>[ 3.601113] pci 0000:01:00.0: supports D1 D2 <6>[ 3.605678] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 3.632586] PCI: bus1: Fast back to back transfers disabled <6>[ 3.638416] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 <6>[ 3.645339] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]: assigned <6>[ 3.653129] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]: assigned <6>[ 3.661850] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]: assigned <6>[ 3.668951] pci 0000:01:00.0: BAR 4 [mem 0x20000000-0x20003fff 64bit pref]: assigned <6>[ 3.677023] pci 0000:01:00.0: BAR 2 [mem 0x13000000-0x13000fff 64bit]: assigned <6>[ 3.684660] pci 0000:01:00.0: BAR 0 [io 0x1000-0x10ff]: assigned <6>[ 3.691036] pci 0000:00:02.0: PCI bridge to [bus 01] <6>[ 3.696298] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] <6>[ 3.702702] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] <6>[ 3.709765] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] <6>[ 3.717810] pci_bus 0000:00: resource 4 [mem 0x01000000-0x01001fff] <6>[ 3.724380] pci_bus 0000:00: resource 5 [io 0x0000-0xffff] <6>[ 3.730228] pci_bus 0000:00: resource 6 [mem 0x13000000-0x1fffffff] <6>[ 3.736788] pci_bus 0000:00: resource 7 [mem 0x20000000-0x3fffffff pref] <6>[ 3.743790] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] <6>[ 3.749637] pci_bus 0000:01: resource 1 [mem 0x13000000-0x130fffff] <6>[ 3.756198] pci_bus 0000:01: resource 2 [mem 0x20000000-0x200fffff 64bit pref] <4>[ 3.763754] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge <6>[ 3.771093] pcieport 0000:00:02.0: enabling device (0140 -> 0143) <6>[ 3.777617] pcieport 0000:00:02.0: PME: Signaling with IRQ 125 <3>[ 3.784216] genirq: Flags mismatch irq 125. 00002084 (PCIe bwctrl) vs. 00200084 (PCIE) <3>[ 3.792568] pcie_bwctrl 0000:00:02.0:pcie010: probe with driver pcie_bwctrl failed with error -16 <6>[ 3.801900] r8169 0000:01:00.0: enabling device (0140 -> 0143) <6>[ 3.867966] r8169 0000:01:00.0 eth0: RTL8168g/8111g, 00:04:4b:21:2a:66, XID 4c0, IRQ 128 <6>[ 3.876331] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <4>[ 3.887857] tegra-ahci 70027000.sata: supply ahci not found, using dummy regulator <4>[ 3.895782] tegra-ahci 70027000.sata: supply phy not found, using dummy regulator <4>[ 3.903636] tegra-ahci 70027000.sata: supply target not found, using dummy regulator <6>[ 3.912610] tegra-ahci 70027000.sata: AHCI vers 0001.0301, 32 command slots, 3 Gbps, platform mode <6>[ 3.921824] tegra-ahci 70027000.sata: 1/2 ports implemented (port mask 0x1) <6>[ 3.929064] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pmp pio slum part sadm sds apst <6>[ 3.939469] scsi host0: tegra-ahci <6>[ 3.943672] scsi host1: tegra-ahci <6>[ 3.947498] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 131 lpm-pol 0 <6>[ 3.956628] ata2: DUMMY <6>[ 3.959829] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 <6>[ 4.285220] ata1: SATA link down (SStatus 0 SControl 300) <4>[ 4.295758] r8169 0000:01:00.0: Unable to load firmware rtl_nic/rtl8168g-2.fw (-2) <6>[ 4.332692] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) <6>[ 4.473215] r8169 0000:01:00.0 eth0: Link is Down <6>[ 6.183378] r8169 0000:01:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx <5>[ 6.212696] Sending DHCP requests ., OK <6>[ 6.257462] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.212 <6>[ 6.265561] IP-Config: Complete: <6>[ 6.269061] device=eth0, hwaddr=00:04:4b:21:2a:66, ipaddr=192.168.0.212, mask=255.255.255.0, gw=192.168.0.254 <6>[ 6.279713] host=192.168.0.212, domain=shed, nis-domain=(none) <6>[ 6.286272] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= <6>[ 6.286289] nameserver0=192.168.0.1, nameserver1=192.168.1.254 <6>[ 6.300291] clk: Disabling unused clocks <6>[ 6.304880] PM: genpd: Disabling unused power domains <6>[ 6.311721] Freeing unused kernel image (initmem) memory: 2048K <6>[ 6.318103] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.379512] udevd[145]: starting version 3.2.9 <5>[ 12.232510] random: crng init done <27>[ 12.238917] udevd[145]: specified user 'tss' unknown <27>[ 12.244308] udevd[145]: specified group 'tss' unknown <30>[ 12.250886] udevd[147]: starting eudev-3.2.9 <6>[ 12.379355] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) <6>[ 12.391511] r8169 0000:01:00.0 enp1s0: renamed from eth0 (while UP) <4>[ 12.409891] tegra-xusb 70090000.usb: Direct firmware load for nvidia/tegra124/xusb.bin failed with error -2 <3>[ 12.419938] tegra-xusb 70090000.usb: failed to request firmware: -2 <3>[ 12.426512] tegra-xusb 70090000.usb: failed to request firmware: -2 <3>[ 12.433163] tegra-xusb 70090000.usb: probe with driver tegra-xusb failed with error -2 <6>[ 12.435419] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when cpu reaches 101000 mC <6>[ 12.451119] tegra_soctherm 700e2000.thermal-sensor: throttrip: will throttle when cpu reaches 101000 mC <6>[ 12.465311] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when gpu reaches 101000 mC <6>[ 12.475114] tegra_soctherm 700e2000.thermal-sensor: throttrip: will throttle when gpu reaches 101000 mC <6>[ 12.491177] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when pll reaches 103000 mC <6>[ 12.502240] tegra_soctherm 700e2000.thermal-sensor: thermtrip: will shut down when mem reaches 101000 mC <6>[ 12.564019] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 <4>[ 12.660360] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub done Saving random seed: <6>[ 12.983223] input: NVIDIA Tegra Jetson TK1 Headphones Jack as /devices/soc0/sound/sound/card1/input2 OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # / # export SHELL=/bin/sh / # . /lava-3906169/environment / # /lava-3906169/bin/lava-test-runner /lava-3906169/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-3906169/0/tests/0_dmesg + cat uuid + UUID=3<8>[ 13.609591] 906169_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 13.644977] <8>[ 13.668608] <8>[ 13.696751] + set +x <8>[ 13.706776] / #