Trying 192.168.56.216... Connected to conserv5. Escape character is '^]'. ser2net port telnet,3000 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.1.1:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot 2024.01 (Jan 16 2024 - 01:00:03 +0000) DRAM: 448 MiB RPI Model B rev2 (0xe) Core: 63 devices, 14 uclasses, devicetree: embed MMC: mmc@7e202000: 0 Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... In: serial,usbkbd Out: serial,vidconsole Err: serial,vidconsole Net: No ethernet found. starting USB... Bus usb@7e980000: USB DWC2 scanning bus usb@7e980000 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.6.31 (806 ms) U-Boot> setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 U-Boot> tftp 0x00080000 944797/tftp-deploy-_alq4vcf/kernel/zImage tftp 0x00080000 944797/tftp-deploy-_alq4vcf/kernel/zImage Waiting for Ethernet connection... done. Using smsc95xx_eth device TFTP from server 192.168.6.2; our IP address is 192.168.6.31 Filename '944797/tftp-deploy-_alq4vcf/kernel/zImage'. Load address: 0x80000 Loading: *################################################## 6.7 MiB 948.2 KiB/s done Bytes transferred = 6983432 (6a8f08 hex) U-Boot> tftp 0x02700000 944797/tftp-deploy-_alq4vcf/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02700000 944797/tftp-deploy-_alq4vcf/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using smsc95xx_eth device TFTP from server 192.168.6.2; our IP address is 192.168.6.31 Filename '944797/tftp-deploy-_alq4vcf/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2700000 Loading: *################################################## 8.9 MiB 1.1 MiB/s done Bytes transferred = 9350825 (8eaea9 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x02600000 944797/tftp-deploy-_alq4vcf/dtb/bcm2835-rpi-b-rev2.dtb tftp 0x02600000 944797/tftp-deploy-_alq4vcf/dtb/bcm2835-rpi-b-rev2.dtb Waiting for Ethernet connection... done. Using smsc95xx_eth device TFTP from server 192.168.6.2; our IP address is 192.168.6.31 Filename '944797/tftp-deploy-_alq4vcf/dtb/bcm2835-rpi-b-rev2.dtb'. Load address: 0x2600000 Loading: *################################################## 18.7 KiB 2.9 KiB/s done Bytes transferred = 19120 (4ab0 hex) U-Boot> setenv bootargs '115200 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs '115200 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x00080000 0x02700000 0x02600000 bootz 0x00080000 0x02700000 0x02600000 Kernel image @ 0x080000 [ 0x000000 - 0x6a8f08 ] ## Loading init Ramdisk from Legacy Image at 02700000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9350761 Bytes = 8.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 02600000 Booting using the fdt blob at 0x2600000 Working FDT set to 2600000 Using Device Tree in place at 02600000, end 02607aaf Working FDT set to 2600000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc6-next-20241106 (KernelCI@build-j364533-arm-gcc-12-bcm2835-defconfig-8kxxs) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Wed Nov 6 08:31:17 UTC 2024 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B Rev 2 [ 0.000000] earlycon: pl11 at MMIO 0x20201000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Reserved memory: created CMA memory pool at 0x18000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x18000000..0x1bffffff (65536 KiB) map reusable linux,cma [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000001bffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Kernel command line: 115200 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <5>[ 0.000000] Unknown kernel command line parameters "115200", will be passed to user space. <6>[ 0.000000] printk: log buffer data + meta data: 262144 + 819200 = 1081344 bytes <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 114688 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 39243 entries in 116 pages <6>[ 0.000000] ftrace: allocated 115 pages with 5 groups <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>[ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000011] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008758] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018504] bcm2835: system timer (irq = 27) <6>[ 0.024058] Console: colour dummy device 80x30 <6>[ 0.028932] printk: legacy console [tty0] enabled <6>[ 0.033989] printk: legacy bootconsole [pl11] disabled <6>[ 0.000000] Booting Linux on physical CPU 0x0 <5>[ 0.000000] Linux version 6.12.0-rc6-next-20241106 (KernelCI@build-j364533-arm-gcc-12-bcm2835-defconfig-8kxxs) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Wed Nov 6 08:31:17 UTC 2024 <6>[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d <6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache <6>[ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B Rev 2 <6>[ 0.000000] earlycon: pl11 at MMIO 0x20201000 (options '115200n8') <6>[ 0.000000] printk: legacy bootconsole [pl11] enabled <6>[ 0.000000] Memory policy: Data cache writeback <6>[ 0.000000] Reserved memory: created CMA memory pool at 0x18000000, size 64 MiB <6>[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool <6>[ 0.000000] OF: reserved mem: 0x18000000..0x1bffffff (65536 KiB) map reusable linux,cma <6>[ 0.000000] Zone ranges: <6>[ 0.000000] DMA [mem 0x0000000000000000-0x000000001bffffff] <6>[ 0.000000] Normal empty <6>[ 0.000000] Movable zone start for each node <6>[ 0.000000] Early memory node ranges <6>[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff] <6>[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff] <6>[ 0.000000] CPU: All CPU(s) started in SVC mode. <5>[ 0.000000] Kernel command line: 115200 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <5>[ 0.000000] Unknown kernel command line parameters "115200", will be passed to user space. <6>[ 0.000000] printk: log buffer data + meta data: 262144 + 819200 = 1081344 bytes <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 114688 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 39243 entries in 116 pages <6>[ 0.000000] ftrace: allocated 115 pages with 5 groups <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>[ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000011] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008758] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018504] bcm2835: system timer (irq = 27) <6>[ 0.024058] Console: colour dummy device 80x30 <6>[ 0.028932] printk: legacy console [tty0] enabled <6>[ 0.033989] printk: legacy bootconsole [pl11] disabled <6>[ 0.039643] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792) <6>[ 0.099649] CPU: Testing write buffer coherency: ok <6>[ 0.099817] pid_max: default: 32768 minimum: 301 <6>[ 0.100364] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.100462] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.150755] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.152976] Memory: 360176K/458752K available (9216K kernel code, 1807K rwdata, 3884K rodata, 1024K init, 467K bss, 31016K reserved, 65536K cma-reserved) <6>[ 0.154235] devtmpfs: initialized <6>[ 0.166031] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 <6>[ 0.166620] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.166734] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.176559] pinctrl core: initialized pinctrl subsystem <6>[ 0.179665] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.182834] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.188702] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.189136] No ATAGs? <6>[ 0.189245] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. <6>[ 0.189304] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.190616] Serial: AMBA PL011 UART driver <6>[ 0.199321] platform 20200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/i2s_alt2 <6>[ 0.199444] platform 20200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/alt0 <6>[ 0.199547] platform 20200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/gpioout <6>[ 0.212251] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <5>[ 0.234904] SCSI subsystem initialized <6>[ 0.235557] usbcore: registered new interface driver usbfs <6>[ 0.235739] usbcore: registered new interface driver hub <6>[ 0.235911] usbcore: registered new device driver usb <4>[ 0.236342] usb_phy_generic phy: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 0.236965] mc: Linux media interface: v0.10 <6>[ 0.237189] videodev: Linux video capture interface: v2.00 <6>[ 0.237391] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.237454] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.237595] PTP clock support registered <6>[ 0.238014] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.239797] Bluetooth: Core ver 2.22 <6>[ 0.239997] NET: Registered PF_BLUETOOTH protocol family <6>[ 0.240064] Bluetooth: HCI device and connection manager initialized <6>[ 0.240138] Bluetooth: HCI socket layer initialized <6>[ 0.240199] Bluetooth: L2CAP socket layer initialized <6>[ 0.240315] Bluetooth: SCO socket layer initialized <6>[ 0.251788] clocksource: Switched to clocksource timer <6>[ 0.315962] NET: Registered PF_INET protocol family <6>[ 0.316609] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.319112] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.319252] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.319358] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 0.319509] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 0.319671] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.319893] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) <6>[ 0.320002] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) <6>[ 0.320417] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.322071] RPC: Registered named UNIX socket transport module. <6>[ 0.322190] RPC: Registered udp transport module. <6>[ 0.322240] RPC: Registered tcp transport module. <6>[ 0.322285] RPC: Registered tcp-with-tls transport module. <6>[ 0.322331] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.333818] Unpacking initramfs... <5>[ 0.354468] Initialise system trusted keyrings <6>[ 0.355321] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <5>[ 1.652937] Key type asymmetric registered <5>[ 1.653064] Asymmetric key parser 'x509' registered <6>[ 1.653358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 1.653447] io scheduler mq-deadline registered <6>[ 1.653502] io scheduler kyber registered <6>[ 1.653644] io scheduler bfq registered <6>[ 1.657707] pinctrl-bcm2835 20200000.gpio: GPIO_OUT persistence: no <6>[ 2.744674] Freeing initrd memory: 9132K <6>[ 2.748038] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.767886] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 2.787701] [drm] Initialized simpledrm 1.0.0 for 1eaa9000.framebuffer on minor 0 <6>[ 2.822817] Console: switching to colour frame buffer device 90x30 <6>[ 2.869074] simple-framebuffer 1eaa9000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device <6>[ 2.891676] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 2.915666] usbcore: registered new interface driver zd1211rw <6>[ 2.932267] usbcore: registered new interface driver lan78xx <6>[ 2.937385] usbcore: registered new interface driver asix <6>[ 2.942307] usbcore: registered new interface driver ax88179_178a <6>[ 2.947030] usbcore: registered new interface driver cdc_ether <6>[ 2.951632] usbcore: registered new interface driver smsc95xx <6>[ 2.967578] usbcore: registered new interface driver net1080 <6>[ 2.983719] usbcore: registered new interface driver cdc_subset <6>[ 2.988376] usbcore: registered new interface driver zaurus <6>[ 3.004393] usbcore: registered new interface driver cdc_ncm <6>[ 3.008875] usbcore: registered new interface driver r8153_ecm <6>[ 3.014245] usbcore: registered new interface driver usb-storage <6>[ 3.018721] i2c_dev: i2c /dev entries driver <4>[ 3.038056] i2c-bcm2835 20805000.i2c: Could not read clock-frequency property <6>[ 3.058091] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 3.074669] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.078848] sdhci: Copyright(c) Pierre Ossman <6>[ 3.083264] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.088318] usbcore: registered new interface driver usbhid <6>[ 3.092653] usbhid: USB HID core driver <6>[ 3.109427] bcm2835-mbox 2000b880.mailbox: mailbox enabled <4>[ 3.125842] armv6-pmu arm-pmu: hw perfevents: no irqs for PMU, sampling events not supported <6>[ 3.146014] hw perfevents: enabled with armv6_1176 PMU driver, 3 (00000007) counters available <6>[ 3.170382] NET: Registered PF_INET6 protocol family <6>[ 3.189272] Segment Routing with IPv6 <6>[ 3.205250] In-situ OAM (IOAM) with IPv6 <6>[ 3.209652] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.213869] sdhost-bcm2835 20202000.mmc: loaded - DMA enabled (>1) <6>[ 3.231052] NET: Registered PF_PACKET protocol family <5>[ 3.263179] Loading compiled-in X.509 certificates <6>[ 3.314269] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 3.335289] printk: legacy console [ttyAMA0] enabled <6>[ 4.283886] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:42:39 <6>[ 4.330341] Console: switching to colour dummy device 80x30 <6>[ 4.353560] vc4-drm soc:gpu: bound 20400000.hvs (ops vc4_hvs_ops) <6>[ 4.368588] vc4-drm soc:gpu: bound 20902000.hdmi (ops vc4_hdmi_ops) <4>[ 4.375455] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 4.384273] vc4-drm soc:gpu: bound 20806000.vec (ops vc4_vec_ops) <6>[ 4.391212] vc4-drm soc:gpu: bound 20004000.txp (ops vc4_txp_ops) <6>[ 4.398085] mmc0: new SDHC card at address e624 <6>[ 4.404824] mmcblk0: mmc0:e624 SD16G 14.8 GiB <6>[ 4.410858] vc4-drm soc:gpu: bound 20206000.pixelvalve (ops vc4_crtc_ops) <6>[ 4.420608] vc4-drm soc:gpu: bound 20207000.pixelvalve (ops vc4_crtc_ops) <6>[ 4.428388] vc4-drm soc:gpu: bound 20807000.pixelvalve (ops vc4_crtc_ops) <6>[ 4.436528] mmcblk0: p1 p2 <6>[ 4.440468] vc4-drm soc:gpu: bound 20c00000.v3d (ops vc4_v3d_ops) <6>[ 4.454843] [drm] Initialized vc4 0.0.0 for soc:gpu on minor 1 <6>[ 4.503795] Console: switching to colour frame buffer device 90x30 <6>[ 4.529992] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device <4>[ 4.542929] dwc2 20980000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.554340] dwc2 20980000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.618113] dwc2 20980000.usb: DWC OTG Controller <6>[ 4.626398] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 <6>[ 4.637004] dwc2 20980000.usb: irq 33, io mem 0x20980000 <6>[ 4.648330] hub 1-0:1.0: USB hub found <6>[ 4.655752] hub 1-0:1.0: 1 port detected <6>[ 4.981953] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 5.193901] hub 1-1:1.0: USB hub found <6>[ 5.201029] hub 1-1:1.0: 3 ports detected <6>[ 5.501973] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 5.616941] smsc95xx v2.0.0 <6>[ 5.729134] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=88) <6>[ 5.747216] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:bb:53:5b <6>[ 5.790237] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 5.807864] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 7.154664] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <5>[ 7.181951] Sending DHCP requests . <5>[ 7.402000] random: crng init done <4>[ 9.891921] ., OK <6>[ 9.937202] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.31 <6>[ 9.948527] IP-Config: Complete: <6>[ 9.955349] device=eth0, hwaddr=b8:27:eb:bb:53:5b, ipaddr=192.168.6.31, mask=255.255.255.0, gw=192.168.6.1 <6>[ 9.972359] host=192.168.6.31, domain=, nis-domain=(none) <6>[ 9.982010] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 9.982079] nameserver0=10.255.253.1 <5>[ 10.001156] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 10.055139] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 10.068965] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 10.080671] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 10.096912] cfg80211: failed to load regulatory.db <6>[ 10.106030] clk: Disabling unused clocks <6>[ 10.115253] PM: genpd: Disabling unused power domains <6>[ 10.124676] ALSA device list: <6>[ 10.131468] #0: vc4-hdmi <6>[ 10.145698] Freeing unused kernel image (initmem) memory: 1024K <6>[ 10.156393] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 10.639634] udevd[78]: starting version 3.2.9 <27>[ 10.682926] udevd[78]: specified user 'tss' unknown <27>[ 10.692992] udevd[78]: specified group 'tss' unknown <30>[ 10.722050] udevd[79]: starting eudev-3.2.9 <4>[ 11.742716] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 11.928745] bcm2835-rng 20104000.rng: hwrng registered <4>[ 12.941529] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. <4>[ 13.003730] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 13.043812] bcm2835-audio bcm2835-audio: card created with 8 channels <4>[ 13.097503] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-944797/environment . /lava-944797/environment / # /lava-944797/bin/lava-test-runner /lava-944797/0 /lava-944797/bin/lava-test-runner /lava-944797/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-944797/0/tests/0_dmesg + cat uuid + UUID=944797_1.5.2.4.1 + set +<8>[ 14.300839] x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.438006] <8>[ 14.564501] <8>[ 14.692310] + set +x <8>[ 14.713800] / # �