Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2024.07 (Sep 30 2024 - 16:18:03 +0900) Trying to boot from MMC2 U-Boot 2024.07 (Sep 30 2024 - 16:18:03 +0900) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 161 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 0:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready , eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.0.82 (4 ms) => setenv serverip 192.168.0.23 setenv serverip 192.168.0.23 => tftp 0x82000000 1217460/tftp-deploy-uk3hxy62/kernel/zImage tftp 0x82000000 1217460/tftp-deploy-uk3hxy62/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.0.23; our IP address is 192.168.0.82 Filename '1217460/tftp-deploy-uk3hxy62/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 5.2 MiB 529.3 KiB/s done Bytes transferred = 5425976 (52cb38 hex) => tftp 0x83000000 1217460/tftp-deploy-uk3hxy62/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1217460/tftp-deploy-uk3hxy62/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.0.23; our IP address is 192.168.0.82 Filename '1217460/tftp-deploy-uk3hxy62/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 15 MiB 528.3 KiB/s done Bytes transferred = 15743809 (f03b41 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1217460/tftp-deploy-uk3hxy62/dtb/am335x-boneblack.dtb tftp 0x88000000 1217460/tftp-deploy-uk3hxy62/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.0.23; our IP address is 192.168.0.82 Filename '1217460/tftp-deploy-uk3hxy62/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 68.9 KiB 100.6 KiB/s done Bytes transferred = 70544 (11390 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x52cb38 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-11-06 9:15:23 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 15743745 Bytes = 15 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Using Device Tree in place at 88000000, end 8801438f Working FDT set to 88000000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc6-next-20241106 (KernelCI@build-j364525-arm-gcc-12-omap2plus-defconfig-b9jlp) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Nov 6 08:36:06 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: legacy bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon) [ 0.000000] percpu: Embedded 17 pages/cpu s39820 r8192 d21620 u69632 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] printk: log buffer data + meta data: 65536 + 204800 = 270336 bytes <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000003] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008343] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018637] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030342] Console: colour dummy device 80x30 <3>[ 0.035248] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042345] This ensures that you still see kernel messages. Please <3>[ 0.049082] update your kernel commandline. <6>[ 0.053691] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095657] CPU: Testing write buffer coherency: ok <6>[ 0.101047] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106517] pid_max: default: 32768 minimum: 301 <6>[ 0.111669] LSM: initializing lsm=capability <6>[ 0.116497] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124340] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134209] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.209238] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.216546] rcu: Hierarchical SRCU implementation. <6>[ 0.221802] rcu: Max phase no-delay instances is 1000. <6>[ 0.228540] smp: Bringing up secondary CPUs ... <6>[ 0.233598] smp: Brought up 1 node, 1 CPU <6>[ 0.237999] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.244762] CPU: All CPU(s) started in SVC mode. <6>[ 0.249976] Memory: 466632K/522240K available (11264K kernel code, 1159K rwdata, 2732K rodata, 1024K init, 292K bss, 37596K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.266457] devtmpfs: initialized <6>[ 0.285497] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.294146] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.304628] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.313225] pinctrl core: initialized pinctrl subsystem <6>[ 0.321438] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.330742] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.338671] audit: initializing netlink subsys (disabled) <6>[ 0.345931] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.345959] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.352598] thermal_sys: Registered thermal governor 'user_space' <5>[ 0.359205] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1 <6>[ 0.374073] cpuidle: using governor menu <6>[ 0.400413] No ATAGs? <6>[ 0.403060] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.412138] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.442560] iommu: Default domain type: Translated <6>[ 0.447788] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.469588] SCSI subsystem initialized <6>[ 0.479554] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.484943] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.494690] PTP clock support registered <6>[ 0.529167] vgaarb: loaded <6>[ 0.532613] clocksource: Switched to clocksource dmtimer <5>[ 0.539183] VFS: Disk quotas dquot_6.6.0 <6>[ 0.543598] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.592384] NET: Registered PF_INET protocol family <6>[ 0.598139] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.607271] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.616231] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.624523] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 0.632823] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 0.640529] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.647479] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.654524] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.662145] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.747674] RPC: Registered named UNIX socket transport module. <6>[ 0.754143] RPC: Registered udp transport module. <6>[ 0.759254] RPC: Registered tcp transport module. <6>[ 0.764384] RPC: Registered tcp-with-tls transport module. <6>[ 0.770297] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.777234] PCI: CLS 0 bytes, default 64 <5>[ 0.783055] Initialise system trusted keyrings <6>[ 0.799871] Trying to unpack rootfs image as initramfs... <6>[ 0.873421] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 0.881867] NFS: Registering the id_resolver key type <5>[ 0.887581] Key type id_resolver registered <5>[ 0.892164] Key type id_legacy registered <6>[ 0.896656] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 0.975384] Key type asymmetric registered <5>[ 0.979917] Asymmetric key parser 'x509' registered <6>[ 0.985412] io scheduler mq-deadline registered <6>[ 0.990353] io scheduler kyber registered <6>[ 0.994884] io scheduler bfq registered <6>[ 1.053422] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.083347] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 1.164406] brd: module loaded <6>[ 1.212089] loop: module loaded <3>[ 1.216759] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 1.266013] i2c_dev: i2c /dev entries driver <5>[ 1.271584] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 1.279407] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.286113] sdhci: Copyright(c) Pierre Ossman <6>[ 1.291055] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.298226] Initializing XFRM netlink socket <6>[ 1.303132] NET: Registered PF_INET6 protocol family <6>[ 1.433925] Segment Routing with IPv6 <6>[ 1.438082] In-situ OAM (IOAM) with IPv6 <6>[ 1.442489] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.449973] NET: Registered PF_PACKET protocol family <6>[ 1.455572] NET: Registered PF_KEY protocol family <5>[ 1.460905] Key type dns_resolver registered <6>[ 1.465897] ThumbEE CPU extension supported. <5>[ 1.470586] Registering SWP/SWPB emulation handler <3>[ 1.476291] omap_voltage_late_init: Voltage driver support not added <6>[ 1.483533] SmartReflex Class3 initialized <5>[ 1.633320] Loading compiled-in X.509 certificates <6>[ 1.739996] platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/clkout2-pins <6>[ 1.755882] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <3>[ 1.766962] ti-sysc 44e31000.target-module: probe with driver ti-sysc failed with error -16 <3>[ 1.886700] ti-sysc 48040000.target-module: probe with driver ti-sysc failed with error -16 <6>[ 1.973776] OMAP GPIO hardware version 0.1 <6>[ 2.015931] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <3>[ 2.082069] 48000000.interconnect:segment@200000:target-module@0:mpu@0:fck: device ID is greater than 24 <6>[ 2.096500] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <4>[ 2.120733] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 2.153075] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 2.222862] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 2.992976] Freeing initrd memory: 15376K <6>[ 3.094992] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.105372] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 3.112733] cpsw-switch 4a100000.switch: ALE Table size 1024, Policers 0 <6>[ 3.120235] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 3.128388] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 3.140073] cpsw-switch 4a100000.switch: Detected MACID = c8:a0:30:a6:76:9e <5>[ 3.149313] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 3.170461] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.179080] edma 49000000.dma: TI EDMA DMA engine driver <3>[ 3.204600] target-module@4b000000:target-module@140000:pmu@0:fck: device ID is greater than 24 <6>[ 3.216083] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 (8000000f) counters available <3>[ 3.233574] l3-aon-clkctrl:0000:0: failed to disable <6>[ 3.242388] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 34, base_baud = 3000000) is a 8250 <6>[ 3.251918] printk: legacy console [ttyS0] enabled <6>[ 3.251918] printk: legacy console [ttyS0] enabled <6>[ 3.262265] printk: legacy bootconsole [omap8250] disabled <6>[ 3.262265] printk: legacy bootconsole [omap8250] disabled <4>[ 3.293658] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 3.299985] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 3.311601] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 3.317998] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 3.331678] i2c 0-0070: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 3.343345] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 3.353084] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 3.362106] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 3.367432] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 3.378031] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 3.388344] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.397763] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.435295] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 3.444546] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 3.453684] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 3.503860] mmc0: new high speed SDHC card at address 0007 <6>[ 3.511139] mmcblk0: mmc0:0007 SD4GB 3.71 GiB <6>[ 3.519241] mmcblk0: p1 <6>[ 3.526194] mmc1: new high speed MMC card at address 0001 <6>[ 3.533481] mmcblk1: mmc1:0001 MMC02G 1.79 GiB <6>[ 3.540871] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 3.552921] mmcblk1boot0: mmc1:0001 MMC02G 1.00 MiB <6>[ 3.561479] mmcblk1boot1: mmc1:0001 MMC02G 1.00 MiB <6>[ 3.573814] mmcblk1rpmb: mmc1:0001 MMC02G 128 KiB, chardev (250:0) <6>[ 6.673379] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <5>[ 6.702621] Sending DHCP requests ., OK <6>[ 6.746858] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.82 <6>[ 6.754893] IP-Config: Complete: <6>[ 6.758401] device=eth0, hwaddr=c8:a0:30:a6:76:9e, ipaddr=192.168.0.82, mask=255.255.255.0, gw=192.168.0.1 <6>[ 6.768840] host=192.168.0.82, domain=, nis-domain=(none) <6>[ 6.774988] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= <6>[ 6.775000] nameserver0=8.8.8.8, nameserver1=8.8.4.4 <6>[ 6.787882] ntpserver0=132.163.97.1 <6>[ 6.792533] clk: Disabling unused clocks <6>[ 6.797047] PM: genpd: Disabling unused power domains <6>[ 6.804639] Freeing unused kernel image (initmem) memory: 1024K <6>[ 6.811542] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.074147] udevd[99]: starting version 3.2.9 <5>[ 9.442638] random: crng init done <27>[ 9.458183] udevd[99]: specified user 'tss' unknown <27>[ 9.464050] udevd[99]: specified group 'tss' unknown <30>[ 9.483602] udevd[100]: starting eudev-3.2.9 <4>[ 10.142240] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 10.290089] usbcore: registered new interface driver usbfs <6>[ 10.296215] usbcore: registered new interface driver hub <6>[ 10.301930] usbcore: registered new device driver usb <4>[ 10.337719] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 10.349791] remoteproc remoteproc0: wkup_m3 is available <4>[ 10.556233] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 10.641439] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 10.647292] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <4>[ 10.655809] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 10.670587] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 10.755937] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 10.761404] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <4>[ 10.781236] at24 2-0056: supply vcc not found, using dummy regulator <6>[ 10.793973] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <6>[ 10.843724] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 <6>[ 10.852349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.859976] usb usb1: Product: MUSB HDRC host driver <6>[ 10.865261] usb usb1: Manufacturer: Linux 6.12.0-rc6-next-20241106 musb-hcd <6>[ 10.872522] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 10.878122] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <4>[ 10.905240] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 10.980902] tda998x 0-0070: found TDA19988 <6>[ 11.001297] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 11.230362] hub 1-0:1.0: USB hub found <6>[ 11.289994] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 11.302985] hub 1-0:1.0: 1 port detected <6>[ 11.432171] remoteproc remoteproc0: powering up wkup_m3 <4>[ 11.492360] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 11.502444] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 11.508761] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 11.698369] omap_rng 48310000.rng: Random Number Generator ver. 20 <6>[ 11.709158] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_audio_codec_init [tda998x]) <6>[ 11.778062] [drm] Initialized tilcdc 1.0.0 for 4830e000.lcdc on minor 0 <6>[ 11.853459] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 11.885491] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 12.038077] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <3>[ 12.086006] PM: Cannot get wkup_m3_ipc handle <6>[ 12.138816] omap-sham 53100000.sham: will run requests pump with realtime priority <3>[ 12.148044] PM: Cannot get wkup_m3_ipc handle <6>[ 12.156624] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 12.237981] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 12.247103] PM: Cannot get wkup_m3_ipc handle <3>[ 12.970499] PM: Cannot get wkup_m3_ipc handle <3>[ 13.028002] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1217460/environment . /lava-1217460/environment / # /lava-1217460/bin/lava-test-runner /lava-1217460/0 /lava-1217460/bin/lava-test-runner /lava-1217460/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1217460/0/tests/0_dmesg + cat uuid + UUID=1217460_1.5.2.4.1 <8>[ 14.110100] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.186958] <8>[ 14.256105] <8>[ 14.325951] + set +x <8>[ 14.337575] / #