Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.187 (54 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1221450/tftp-deploy-_rsv168w/kernel/zImage tftp 0x82000000 1221450/tftp-deploy-_rsv168w/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '1221450/tftp-deploy-_rsv168w/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 10.5 MiB 3.8 MiB/s done Bytes transferred = 11059712 (a8c200 hex) => tftp 0x83000000 1221450/tftp-deploy-_rsv168w/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1221450/tftp-deploy-_rsv168w/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '1221450/tftp-deploy-_rsv168w/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 17 MiB 3.8 MiB/s done Bytes transferred = 17876050 (110c452 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1221450/tftp-deploy-_rsv168w/dtb/am335x-boneblack.dtb tftp 0x88000000 1221450/tftp-deploy-_rsv168w/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '1221450/tftp-deploy-_rsv168w/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 68.9 KiB 3.2 MiB/s done Bytes transferred = 70544 (11390 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0xa8c200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-11-11 10:43:02 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17875986 Bytes = 17 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801438f Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc7-next-20241111 (KernelCI@build-j372537-arm-gcc-12-multi-v7-defconfig-config-smp-n-zxq5n) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Mon Nov 11 10:05:01 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: legacy bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008333] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019095] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033808] Console: colour dummy device 80x30 <3>[ 0.038692] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045728] This ensures that you still see kernel messages. Please <3>[ 0.052445] update your kernel commandline. <6>[ 0.057042] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096081] CPU: Testing write buffer coherency: ok <6>[ 0.101456] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106919] pid_max: default: 32768 minimum: 301 <6>[ 0.112082] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.119890] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.139646] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.153212] EFI services will not be available. <6>[ 0.158239] Memory: 405412K/522240K available (15360K kernel code, 2540K rwdata, 6760K rodata, 2048K init, 411K bss, 49984K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.174422] devtmpfs: initialized <6>[ 0.189178] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.197647] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.208062] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.220400] pinctrl core: initialized pinctrl subsystem <6>[ 0.230786] DMI not present or invalid. <6>[ 0.236140] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.244859] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.255968] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.256013] cpuidle: using governor menu <6>[ 0.287118] /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 0.305641] /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 0.325812] No ATAGs? <6>[ 0.328438] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.339755] Serial: AMBA PL011 UART driver <6>[ 0.364072] iommu: Default domain type: Translated <6>[ 0.369295] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.377442] SCSI subsystem initialized <6>[ 0.409773] usbcore: registered new interface driver usbfs <6>[ 0.415725] usbcore: registered new interface driver hub <6>[ 0.421543] usbcore: registered new device driver usb <6>[ 0.427934] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.433351] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.443035] PTP clock support registered <6>[ 0.447466] EDAC MC: Ver: 3.0.0 <6>[ 0.497681] scmi_core: SCMI protocol bus registered <6>[ 0.505477] vgaarb: loaded <6>[ 0.509044] clocksource: Switched to clocksource dmtimer <6>[ 0.543251] NET: Registered PF_INET protocol family <6>[ 0.548828] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.557560] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.566577] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.574825] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 0.583096] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 0.590760] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.597660] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) <6>[ 0.604673] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) <6>[ 0.612255] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.691753] RPC: Registered named UNIX socket transport module. <6>[ 0.698134] RPC: Registered udp transport module. <6>[ 0.703267] RPC: Registered tcp transport module. <6>[ 0.708368] RPC: Registered tcp-with-tls transport module. <6>[ 0.714281] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.721197] PCI: CLS 0 bytes, default 64 <5>[ 0.726687] Initialise system trusted keyrings <6>[ 0.745158] Trying to unpack rootfs image as initramfs... <6>[ 0.809300] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 0.816760] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.863293] NFS: Registering the id_resolver key type <5>[ 0.868866] Key type id_resolver registered <5>[ 0.873468] Key type id_legacy registered <6>[ 0.877895] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.885091] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.940047] Key type asymmetric registered <5>[ 0.944567] Asymmetric key parser 'x509' registered <6>[ 0.950032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.957912] io scheduler mq-deadline registered <6>[ 0.962856] io scheduler kyber registered <6>[ 0.967303] io scheduler bfq registered <6>[ 0.980360] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.290540] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.331806] msm_serial: driver initialized <6>[ 1.336558] SuperH (H)SCI(F) driver initialized <6>[ 1.341740] STMicroelectronics ASC driver initialized <6>[ 1.347319] STM32 USART driver initialized <6>[ 1.450733] brd: module loaded <6>[ 1.512739] loop: module loaded <6>[ 1.545597] CAN device driver interface <6>[ 1.550677] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.557473] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.562896] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.569309] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.575130] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.583833] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.589949] usbcore: registered new interface driver pegasus <6>[ 1.596067] usbcore: registered new interface driver asix <6>[ 1.601930] usbcore: registered new interface driver ax88179_178a <6>[ 1.608496] usbcore: registered new interface driver cdc_ether <6>[ 1.614802] usbcore: registered new interface driver smsc75xx <6>[ 1.621016] usbcore: registered new interface driver smsc95xx <6>[ 1.627220] usbcore: registered new interface driver net1080 <6>[ 1.633343] usbcore: registered new interface driver cdc_subset <6>[ 1.639735] usbcore: registered new interface driver zaurus <6>[ 1.645771] usbcore: registered new interface driver cdc_ncm <6>[ 1.654731] usbcore: registered new interface driver usb-storage <6>[ 1.665024] i2c_dev: i2c /dev entries driver <5>[ 1.681114] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 1.690198] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.696844] sdhci: Copyright(c) Pierre Ossman <6>[ 1.703047] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.710812] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.720202] usbcore: registered new interface driver usbhid <6>[ 1.726222] usbhid: USB HID core driver <6>[ 1.736869] NET: Registered PF_INET6 protocol family <6>[ 2.160671] Segment Routing with IPv6 <6>[ 2.164813] In-situ OAM (IOAM) with IPv6 <6>[ 2.169280] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.176419] NET: Registered PF_PACKET protocol family <6>[ 2.181946] can: controller area network core <6>[ 2.186763] NET: Registered PF_CAN protocol family <6>[ 2.191983] can: raw protocol <6>[ 2.195303] can: broadcast manager protocol <6>[ 2.199895] can: netlink gateway - max_hops=1 <5>[ 2.205334] Key type dns_resolver registered <6>[ 2.210345] ThumbEE CPU extension supported. <5>[ 2.215028] Registering SWP/SWPB emulation handler <3>[ 2.220699] omap_voltage_late_init: Voltage driver support not added <5>[ 2.389424] Loading compiled-in X.509 certificates <6>[ 2.441930] /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 2.469551] /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 2.616919] /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 2.636235] /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 2.661655] /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/clkout2-pins <6>[ 2.682941] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <3>[ 2.705016] ti-sysc 44e31000.target-module: probe with driver ti-sysc failed with error -16 <6>[ 2.970983] /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <3>[ 3.003578] ti-sysc 48040000.target-module: probe with driver ti-sysc failed with error -16 <6>[ 3.209768] OMAP GPIO hardware version 0.1 <6>[ 3.226976] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <4>[ 3.311674] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 3.350480] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 3.384178] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 3.422844] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 3.464163] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <3>[ 3.530907] 48000000.interconnect:segment@200000:target-module@0:mpu@0:fck: device ID is greater than 24 <6>[ 3.544780] /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 3.567220] /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 3.586193] /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 3.604109] /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <4>[ 3.633016] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.651765] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.849365] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 3.873908] random: crng init done <6>[ 3.919675] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.086399] Freeing initrd memory: 17460K <6>[ 4.181327] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.191524] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 4.198791] cpsw-switch 4a100000.switch: ALE Table size 1024, Policers 0 <6>[ 4.206221] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 4.214318] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 4.225909] cpsw-switch 4a100000.switch: Detected MACID = 04:79:b7:e7:06:e0 <5>[ 4.234491] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 4.262058] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.270578] edma 49000000.dma: TI EDMA DMA engine driver <3>[ 4.331921] target-module@4b000000:target-module@140000:pmu@0:fck: device ID is greater than 24 <6>[ 4.345267] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 (8000000f) counters available <3>[ 4.362644] l3-aon-clkctrl:0000:0: failed to disable <6>[ 4.429864] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 36, base_baud = 3000000) is a 8250 <6>[ 4.439232] printk: legacy console [ttyS0] enabled <6>[ 4.439232] printk: legacy console [ttyS0] enabled <6>[ 4.449518] printk: legacy bootconsole [omap8250] disabled <6>[ 4.449518] printk: legacy bootconsole [omap8250] disabled <4>[ 4.489612] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.496778] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.514519] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.521310] /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 4.538862] /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 4.556571] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.575261] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.584398] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.589511] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 4.602319] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 4.610746] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 4.618824] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.715406] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 4.741828] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 4.781079] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.789843] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 4.843156] mmc1: new high speed MMC card at address 0001 <6>[ 4.849864] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.857052] mmcblk1: p1 <6>[ 4.860780] mmcblk1boot0: mmc1:0001 M62704 2.00 MiB <6>[ 4.867384] mmcblk1boot1: mmc1:0001 M62704 2.00 MiB <6>[ 4.873901] mmcblk1rpmb: mmc1:0001 M62704 512 KiB, chardev (236:0) <6>[ 4.910764] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 8.069951] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <5>[ 8.109117] Sending DHCP requests ., OK <6>[ 8.193338] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.187 <6>[ 8.201320] IP-Config: Complete: <6>[ 8.204848] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.187, mask=255.255.255.0, gw=172.16.3.3 <6>[ 8.215234] host=172.16.3.187, domain=denx.de, nis-domain=(none) <6>[ 8.222022] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 8.222051] nameserver0=172.16.3.3 <6>[ 8.233420] ntpserver0=172.16.3.3 <6>[ 8.238531] clk: Disabling unused clocks <6>[ 8.243158] PM: genpd: Disabling unused power domains <6>[ 8.259555] Freeing unused kernel image (initmem) memory: 2048K <6>[ 8.268433] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.451062] udevd[96]: starting version 3.2.9 <27>[ 8.466497] udevd[96]: specified user 'tss' unknown <27>[ 8.472465] udevd[96]: specified group 'tss' unknown <30>[ 8.490894] udevd[97]: starting eudev-3.2.9 <4>[ 10.143754] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 10.319531] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 10.498281] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 10.504049] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 10.670555] hub 1-0:1.0: USB hub found <6>[ 10.681945] tda998x 0-0070: found TDA19988 <6>[ 10.755032] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1221450/environment . /lava-1221450/environment / # /lava-1221450/bin/lava-test-runner /lava-1221450/0 /lava-1221450/bin/lava-test-runner /lava-1221450/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1221450/0/tests/0_dmesg + cat uuid + UUID=1221450_1.5.2.4.1 + <8>[ 13.952760] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.006756] <8>[ 14.055723] <8>[ 14.104761] + set +x <8>[ 14.115260] / #