Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete....... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.6.14 (786 ms) => setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 => tftp 0x12000000 978438/tftp-deploy-t8hm46mi/kernel/zImage tftp 0x12000000 978438/tftp-deploy-t8hm46mi/kernel/zImage Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '978438/tftp-deploy-t8hm46mi/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################### 7.9 MiB/s done Bytes transferred = 11059712 (a8c200 hex) => tftp 0x13000000 978438/tftp-deploy-t8hm46mi/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 978438/tftp-deploy-t8hm46mi/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '978438/tftp-deploy-t8hm46mi/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################# 8.4 MiB/s done Bytes transferred = 17881129 (110d829 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 978438/tftp-deploy-t8hm46mi/dtb/imx6dl-udoo.dtb tftp 0x18000000 978438/tftp-deploy-t8hm46mi/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '978438/tftp-deploy-t8hm46mi/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 5.6 MiB/s done Bytes transferred = 35141 (8945 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0xa8c200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17881065 Bytes = 17.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b944 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc7-next-20241112 (KernelCI@build-j373699-arm-gcc-12-multi-v7-defconfig-config-smp-n-zrftd) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 Tue Nov 12 07:10:58 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: legacy bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:129 arm_dt_init_cpu_maps+0xbc/0x120 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.12.0-rc7-next-20241112 #1 [ 0.000000] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 0.000000] Call trace: [ 0.000000] unwind_backtrace from show_stack+0x10/0x14 [ 0.000000] show_stack from dump_stack_lvl+0x50/0x58 [ 0.000000] dump_stack_lvl from __warn+0x7c/0x104 [ 0.000000] __warn from warn_slowpath_fmt+0x98/0xc8 [ 0.000000] warn_slowpath_fmt from arm_dt_init_cpu_maps+0xbc/0x120 [ 0.000000] arm_dt_init_cpu_maps from setup_arch+0x44c/0x680 [ 0.000000] setup_arch from start_kernel+0x68/0x6a4 [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008437] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021822] Console: colour dummy device 80x30 <6>[ 0.023734] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.034144] CPU: Testing write buffer coherency: ok <6>[ 0.039267] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.044565] pid_max: default: 32768 minimum: 301 <6>[ 0.049572] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.057022] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085783] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.093317] EFI services will not be available. <6>[ 0.095305] Memory: 926712K/1048576K available (15360K kernel code, 2540K rwdata, 6760K rodata, 2048K init, 411K bss, 54188K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.111336] devtmpfs: initialized <6>[ 0.120302] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.125579] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.135529] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.144901] pinctrl core: initialized pinctrl subsystem <6>[ 0.151207] DMI not present or invalid. <6>[ 0.153393] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.160718] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.168125] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.168157] cpuidle: using governor menu <6>[ 0.176541] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.189203] /soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.193804] /soc/hdmi@120000: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.201227] /soc/interrupt-controller@a01000: Fixed dependency cycle(s) with /soc/interrupt-controller@a01000 <6>[ 0.211481] /soc/bus@2000000/clock-controller@20c4000: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.222035] /soc/bus@2000000/gpc@20dc000: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.232617] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.242877] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.253313] /soc/ipu@2400000: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.260516] /soc/ipu@2400000: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux <6>[ 0.270780] /soc/ipu@2400000: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux <6>[ 0.281706] /soc/hdmi@120000: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.289928] /soc/bus@2000000/clock-controller@20c4000: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.299120] /soc/bus@2000000/gpc@20dc000: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.309692] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.319954] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <4>[ 0.336775] mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator <4>[ 0.342470] mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator <6>[ 0.351383] /soc/bus@2000000/gpc@20dc000: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.360776] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.370682] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.381472] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.391457] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.406924] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.414457] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.424729] /soc/hdmi@120000: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.432101] /soc/ipu@2400000: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.439493] /soc/ipu@2400000: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux <6>[ 0.449770] /soc/ipu@2400000: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux <6>[ 0.465838] No ATAGs? <6>[ 0.465885] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.473787] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.482100] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.493104] Serial: AMBA PL011 UART driver <4>[ 0.527549] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.547606] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.557407] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.576967] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.599665] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.607583] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.627028] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.658818] iommu: Default domain type: Translated <6>[ 0.661027] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.668511] SCSI subsystem initialized <6>[ 0.682781] usbcore: registered new interface driver usbfs <6>[ 0.685736] usbcore: registered new interface driver hub <6>[ 0.691294] usbcore: registered new device driver usb <4>[ 0.696813] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 0.706034] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 0.716741] i2c i2c-1: IMX I2C adapter registered <6>[ 0.720695] i2c i2c-2: IMX I2C adapter registered <6>[ 0.726251] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.730313] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.739743] PTP clock support registered <6>[ 0.744065] EDAC MC: Ver: 3.0.0 <6>[ 0.818550] scmi_core: SCMI protocol bus registered <6>[ 0.823417] vgaarb: loaded <6>[ 0.824131] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.850839] NET: Registered PF_INET protocol family <6>[ 0.853396] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.862530] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.869530] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.877511] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.885579] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.893013] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.899598] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.906333] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.913638] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.988854] RPC: Registered named UNIX socket transport module. <6>[ 0.992194] RPC: Registered udp transport module. <6>[ 0.997176] RPC: Registered tcp transport module. <6>[ 1.002110] RPC: Registered tcp-with-tls transport module. <6>[ 1.007863] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.014568] PCI: CLS 0 bytes, default 64 <5>[ 1.020118] Initialise system trusted keyrings <6>[ 1.039057] Trying to unpack rootfs image as initramfs... <6>[ 1.094354] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.098577] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.124449] NFS: Registering the id_resolver key type <5>[ 1.126957] Key type id_resolver registered <5>[ 1.131359] Key type id_legacy registered <6>[ 1.135689] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.142582] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 1.204340] Key type asymmetric registered <5>[ 1.205858] Asymmetric key parser 'x509' registered <6>[ 1.211058] bounce: pool size: 64 pages <6>[ 1.215170] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 1.222735] io scheduler mq-deadline registered <6>[ 1.227536] io scheduler kyber registered <6>[ 1.231807] io scheduler bfq registered <6>[ 1.256127] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.418335] mxs-dma 110000.dma-controller: initialized <6>[ 1.718478] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.748924] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 259, base_baud = 5000000) is a IMX <6>[ 1.755130] printk: console [ttymxc1] enabled <6>[ 1.755130] printk: console [ttymxc1] enabled <6>[ 1.764289] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.764289] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.860315] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 260, base_baud = 5000000) is a IMX <6>[ 1.861638] msm_serial: driver initialized <6>[ 1.862159] SuperH (H)SCI(F) driver initialized <6>[ 1.862568] STMicroelectronics ASC driver initialized <6>[ 1.862720] STM32 USART driver initialized <6>[ 1.949217] brd: module loaded <6>[ 1.972381] loop: module loaded <6>[ 2.002806] CAN device driver interface <6>[ 2.004286] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.006021] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.006028] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.006076] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.006082] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.011776] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.011822] usbcore: registered new interface driver pegasus <6>[ 2.011861] usbcore: registered new interface driver asix <6>[ 2.011894] usbcore: registered new interface driver ax88179_178a <6>[ 2.011926] usbcore: registered new interface driver cdc_ether <6>[ 2.011961] usbcore: registered new interface driver smsc75xx <6>[ 2.011992] usbcore: registered new interface driver smsc95xx <6>[ 2.012025] usbcore: registered new interface driver net1080 <6>[ 2.012055] usbcore: registered new interface driver cdc_subset <6>[ 2.012086] usbcore: registered new interface driver zaurus <6>[ 2.012134] usbcore: registered new interface driver cdc_ncm <6>[ 2.017442] usbcore: registered new interface driver usb-storage <4>[ 2.019540] imx_usb 2184000.usb: No over current polarity defined <3>[ 3.201035] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 3.201632] imx_usb 2184200.usb: No over current polarity defined <6>[ 3.252339] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 3.252378] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 3.266775] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 3.267660] hub 1-0:1.0: USB hub found <6>[ 3.267714] hub 1-0:1.0: 1 port detected <6>[ 3.275829] i2c_dev: i2c /dev entries driver <6>[ 3.372974] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.372987] sdhci: Copyright(c) Pierre Ossman <6>[ 3.375507] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.377564] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.383072] usbcore: registered new interface driver usbhid <6>[ 3.383084] usbhid: USB HID core driver <6>[ 3.388782] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 (8000003f) counters available <6>[ 3.392557] NET: Registered PF_INET6 protocol family <6>[ 3.449981] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 3.506874] Segment Routing with IPv6 <6>[ 3.506959] In-situ OAM (IOAM) with IPv6 <6>[ 3.507045] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.507685] NET: Registered PF_PACKET protocol family <6>[ 3.507697] can: controller area network core <6>[ 3.507744] NET: Registered PF_CAN protocol family <6>[ 3.507753] can: raw protocol <6>[ 3.507762] can: broadcast manager protocol <6>[ 3.507772] can: netlink gateway - max_hops=1 <5>[ 3.508322] Key type dns_resolver registered <6>[ 3.510119] ThumbEE CPU extension supported. <5>[ 3.510139] Registering SWP/SWPB emulation handler <6>[ 3.548241] usb 1-1: new full-speed USB device number 2 using ci_hdrc <5>[ 3.604907] Loading compiled-in X.509 certificates <6>[ 3.644960] pps pps0: new PPS source ptp0 <3>[ 3.814253] usb 1-1: device descriptor read/64, error -71 <6>[ 4.138195] Freeing initrd memory: 17464K <6>[ 4.138394] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <3>[ 4.144242] usb 1-1: device descriptor read/64, error -71 <6>[ 4.196912] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 4.220979] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 4.223136] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <4>[ 4.251728] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 4.253666] mmc2: new high speed SDXC card at address 59b4 <6>[ 4.268427] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 4.271286] mmcblk2: p1 p2 <6>[ 4.317484] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <6>[ 4.384192] usb 1-1: new full-speed USB device number 3 using ci_hdrc <3>[ 4.614197] usb 1-1: device descriptor read/64, error -71 <3>[ 4.944175] usb 1-1: device descriptor read/64, error -71 <6>[ 5.054255] usb usb1-port1: attempt power cycle <6>[ 5.474198] usb 1-1: new full-speed USB device number 4 using ci_hdrc <3>[ 5.954206] usb 1-1: device not accepting address 4, error -71 <6>[ 6.084202] usb 1-1: new full-speed USB device number 5 using ci_hdrc <3>[ 6.564191] usb 1-1: device not accepting address 5, error -71 <3>[ 6.564292] usb usb1-port1: unable to enumerate USB device <6>[ 7.464880] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <5>[ 7.484179] Sending DHCP requests ., OK <6>[ 7.544216] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.14 <6>[ 7.544245] IP-Config: Complete: <6>[ 7.544252] device=eth0, hwaddr=00:c0:08:88:29:80, ipaddr=192.168.6.14, mask=255.255.255.0, gw=192.168.6.1 <6>[ 7.544283] host=192.168.6.14, domain=, nis-domain=(none) <6>[ 7.544296] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 7.544309] nameserver0=10.255.253.1 <6>[ 7.544707] clk: Disabling unused clocks <6>[ 7.545060] PM: genpd: Disabling unused power domains <6>[ 7.549950] Freeing unused kernel image (initmem) memory: 2048K <6>[ 7.550592] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.749031] udevd[76]: starting version 3.2.9 <5>[ 12.864159] random: crng init done <27>[ 12.871690] udevd[76]: specified user 'tss' unknown <27>[ 12.871823] udevd[76]: specified group 'tss' unknown <30>[ 12.873985] udevd[77]: starting eudev-3.2.9 <6>[ 13.995629] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 14.096578] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) <6>[ 14.103679] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 14.103800] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 14.103862] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) <6>[ 14.139925] [drm] Initialized imx-drm 1.0.0 for display-subsystem on minor 0 <6>[ 14.139988] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 14.163843] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 14.202097] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 14.242011] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 14.244227] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 <6>[ 14.244632] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 14.251794] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 1 <4>[ 14.497576] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW <6>[ 14.638858] caam 2100000.crypto: Entropy delay = 3200 <6>[ 14.651375] caam 2100000.crypto: Instantiated RNG4 SH0 <6>[ 14.663851] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 14.663864] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) <6>[ 14.663874] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 14.803600] usbcore: registered new device driver onboard-usb-dev <4>[ 14.867273] onboard-usb-dev 2184200.usb:usb-port@1: supply vdd not found, using dummy regulator <6>[ 15.194192] usb 1-1: new high-speed USB device number 6 using ci_hdrc <6>[ 15.365464] hub 1-1:1.0: USB hub found <6>[ 15.365815] hub 1-1:1.0: 4 ports detected <6>[ 15.664222] usb 1-1.3: new high-speed USB device number 7 using ci_hdrc <6>[ 15.791968] caam algorithms registered in /proc/crypto <6>[ 15.792086] caam 2100000.crypto: registering rng-caam <6>[ 15.792444] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-978438/environment . /lava-978438/environment / # /lava-978438/bin/lava-test-runner /lava-978438/0 /lava-978438/bin/lava-test-runner /lava-978438/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-978438/0/tests/0_dmesg + cat uuid + UUID=978438_1.5.2.4.1 <8>[ 16.521761] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.562665] <8>[ 16.600735] + set +x