Trying 192.168.56.22... Connected to conserv3. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.4:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) Trying to boot from MMC1 U-Boot 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.6.16 (74 ms) => setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 => tftp 0x82000000 973344/tftp-deploy-qeg7xtf_/kernel/zImage tftp 0x82000000 973344/tftp-deploy-qeg7xtf_/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.16 Filename '973344/tftp-deploy-qeg7xtf_/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 10.9 MiB 4.9 MiB/s done Bytes transferred = 11448832 (aeb200 hex) => tftp 0x83000000 973344/tftp-deploy-qeg7xtf_/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 973344/tftp-deploy-qeg7xtf_/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.16 Filename '973344/tftp-deploy-qeg7xtf_/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 17.1 MiB 5.1 MiB/s done Bytes transferred = 17964383 (1121d5f hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 973344/tftp-deploy-qeg7xtf_/dtb/am335x-boneblack.dtb tftp 0x88000000 973344/tftp-deploy-qeg7xtf_/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.16 Filename '973344/tftp-deploy-qeg7xtf_/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 68.9 KiB 4 MiB/s done Bytes transferred = 70568 (113a8 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0xaeb200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-11-11 0:35:55 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17964319 Bytes = 17.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Using Device Tree in place at 88000000, end 880143a7 Working FDT set to 88000000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc6 (KernelCI@build-j372296-arm-gcc-12-multi-v7-defconfig-cqkrh) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Mon Nov 11 00:21:46 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: legacy bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon) [ 0.000000] percpu: Embedded 17 pages/cpu s40844 r8192 d20596 u69632 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000003] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008334] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019144] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033960] Console: colour dummy device 80x30 <3>[ 0.038856] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045923] This ensures that you still see kernel messages. Please <3>[ 0.052649] update your kernel commandline. <6>[ 0.057261] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096145] CPU: Testing write buffer coherency: ok <6>[ 0.101512] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106975] pid_max: default: 32768 minimum: 301 <6>[ 0.112168] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.119985] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.129335] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.189531] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.199128] rcu: Hierarchical SRCU implementation. <6>[ 0.204412] rcu: Max phase no-delay instances is 1000. <6>[ 0.215432] EFI services will not be available. <6>[ 0.220782] smp: Bringing up secondary CPUs ... <6>[ 0.225752] smp: Brought up 1 node, 1 CPU <6>[ 0.230243] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.236961] CPU: All CPU(s) started in SVC mode. <6>[ 0.242164] Memory: 402900K/522240K available (16384K kernel code, 2543K rwdata, 6788K rodata, 2048K init, 430K bss, 52148K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.258437] devtmpfs: initialized <6>[ 0.275612] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.284217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.294659] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.306937] pinctrl core: initialized pinctrl subsystem <6>[ 0.317605] DMI not present or invalid. <6>[ 0.323465] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.332422] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.343921] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.344089] cpuidle: using governor menu <6>[ 0.379986] No ATAGs? <6>[ 0.382628] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.394564] Serial: AMBA PL011 UART driver <6>[ 0.425426] iommu: Default domain type: Translated <6>[ 0.430765] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.460876] SCSI subsystem initialized <6>[ 0.465763] usbcore: registered new interface driver usbfs <6>[ 0.471793] usbcore: registered new interface driver hub <6>[ 0.477572] usbcore: registered new device driver usb <6>[ 0.484089] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.489516] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.499203] PTP clock support registered <6>[ 0.503676] EDAC MC: Ver: 3.0.0 <6>[ 0.553512] scmi_core: SCMI protocol bus registered <6>[ 0.580028] vgaarb: loaded <6>[ 0.583774] clocksource: Switched to clocksource dmtimer <6>[ 0.610923] NET: Registered PF_INET protocol family <6>[ 0.616624] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.625472] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.634398] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.642640] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 0.650925] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 0.658647] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.665575] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.672586] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.680197] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.763906] RPC: Registered named UNIX socket transport module. <6>[ 0.770291] RPC: Registered udp transport module. <6>[ 0.775431] RPC: Registered tcp transport module. <6>[ 0.780537] RPC: Registered tcp-with-tls transport module. <6>[ 0.786461] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.793366] PCI: CLS 0 bytes, default 64 <5>[ 0.799151] Initialise system trusted keyrings <6>[ 0.819255] Trying to unpack rootfs image as initramfs... <6>[ 0.894293] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 0.901770] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.944643] NFS: Registering the id_resolver key type <5>[ 0.950232] Key type id_resolver registered <5>[ 0.954881] Key type id_legacy registered <6>[ 0.959319] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.966513] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 1.040314] Key type asymmetric registered <5>[ 1.044916] Asymmetric key parser 'x509' registered <6>[ 1.050332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 1.058258] io scheduler mq-deadline registered <6>[ 1.063188] io scheduler kyber registered <6>[ 1.067666] io scheduler bfq registered <6>[ 1.184417] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.467500] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.506680] msm_serial: driver initialized <6>[ 1.511466] SuperH (H)SCI(F) driver initialized <6>[ 1.516779] STMicroelectronics ASC driver initialized <6>[ 1.522381] STM32 USART driver initialized <6>[ 1.656020] brd: module loaded <6>[ 1.689986] loop: module loaded <6>[ 1.721201] CAN device driver interface <6>[ 1.726488] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.733442] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.738912] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.745356] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.751178] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.760514] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.766667] usbcore: registered new interface driver pegasus <6>[ 1.772794] usbcore: registered new interface driver asix <6>[ 1.778677] usbcore: registered new interface driver ax88179_178a <6>[ 1.785268] usbcore: registered new interface driver cdc_ether <6>[ 1.791576] usbcore: registered new interface driver smsc75xx <6>[ 1.797809] usbcore: registered new interface driver smsc95xx <6>[ 1.804044] usbcore: registered new interface driver net1080 <6>[ 1.810163] usbcore: registered new interface driver cdc_subset <6>[ 1.816583] usbcore: registered new interface driver zaurus <6>[ 1.822625] usbcore: registered new interface driver cdc_ncm <6>[ 1.832102] usbcore: registered new interface driver usb-storage <6>[ 1.843168] i2c_dev: i2c /dev entries driver <5>[ 1.861387] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 1.870945] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.877704] sdhci: Copyright(c) Pierre Ossman <6>[ 1.884189] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.891967] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.901817] usbcore: registered new interface driver usbhid <6>[ 1.907929] usbhid: USB HID core driver <6>[ 1.919669] NET: Registered PF_INET6 protocol family <6>[ 2.374606] Segment Routing with IPv6 <6>[ 2.378753] In-situ OAM (IOAM) with IPv6 <6>[ 2.383149] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.390491] NET: Registered PF_PACKET protocol family <6>[ 2.396047] can: controller area network core <6>[ 2.400876] NET: Registered PF_CAN protocol family <6>[ 2.406100] can: raw protocol <6>[ 2.409426] can: broadcast manager protocol <6>[ 2.414033] can: netlink gateway - max_hops=1 <5>[ 2.419543] Key type dns_resolver registered <6>[ 2.424596] ThumbEE CPU extension supported. <5>[ 2.429282] Registering SWP/SWPB emulation handler <3>[ 2.434969] omap_voltage_late_init: Voltage driver support not added <5>[ 2.624297] Loading compiled-in X.509 certificates <6>[ 2.752644] platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/clkout2-pins <6>[ 2.769308] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <3>[ 2.792928] ti-sysc 44e31000.target-module: probe with driver ti-sysc failed with error -16 <3>[ 2.998057] ti-sysc 48040000.target-module: probe with driver ti-sysc failed with error -16 <6>[ 3.214229] OMAP GPIO hardware version 0.1 <6>[ 3.232798] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <4>[ 3.335568] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 3.377363] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 3.418448] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 3.457660] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 3.506906] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <3>[ 3.580029] 48000000.interconnect:segment@200000:target-module@0:mpu@0:fck: device ID is greater than 24 <6>[ 3.600830] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <4>[ 3.626868] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.636052] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.754266] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 3.780348] random: crng init done <6>[ 3.824082] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.110195] Freeing initrd memory: 17544K <6>[ 4.176198] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.186531] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 4.193869] cpsw-switch 4a100000.switch: ALE Table size 1024, Policers 0 <6>[ 4.201313] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 4.209441] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 4.221079] cpsw-switch 4a100000.switch: Detected MACID = c8:a0:30:c2:c5:7d <5>[ 4.230116] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 4.259847] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.268432] edma 49000000.dma: TI EDMA DMA engine driver <3>[ 4.335700] target-module@4b000000:target-module@140000:pmu@0:fck: device ID is greater than 24 <6>[ 4.350035] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 (8000000f) counters available <3>[ 4.367093] l3-aon-clkctrl:0000:0: failed to disable <6>[ 4.414839] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 36, base_baud = 3000000) is a 8250 <6>[ 4.424298] printk: legacy console [ttyS0] enabled <6>[ 4.424298] printk: legacy console [ttyS0] enabled <6>[ 4.434616] printk: legacy bootconsole [omap8250] disabled <6>[ 4.434616] printk: legacy bootconsole [omap8250] disabled <4>[ 4.504570] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.511952] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.531505] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.538459] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 4.552141] i2c 0-0070: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 4.564032] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.584514] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.593570] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.598777] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 4.611959] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 4.622095] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 4.631242] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.754071] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 4.800119] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 4.811326] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.820132] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 4.863425] mmc0: new high speed SDHC card at address 0001 <6>[ 4.870592] mmcblk0: mmc0:0001 EB1QT 29.8 GiB <6>[ 4.878381] mmcblk0: p1 <4>[ 4.890392] mmc1: unexpected status 0x2000980 after switch <6>[ 4.897859] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <4>[ 4.908882] mmc1: unexpected status 0x2000900 after switch <4>[ 4.916828] mmc1: unexpected status 0x2000900 after switch <4>[ 4.927816] mmc1: unexpected status 0x2000900 after switch <6>[ 4.933681] mmc1: new high speed MMC card at address 0001 <6>[ 4.941253] mmcblk1: mmc1:0001 MMC02G 1.79 GiB <4>[ 6.627103] mmc1: unexpected status 0x2000980 after switch <4>[ 6.634779] mmc1: unexpected status 0x2000900 after switch <4>[ 6.641064] mmc1: unexpected status 0x2000900 after switch <4>[ 6.647970] mmc1: unexpected status 0x2000900 after switch <6>[ 7.074845] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <5>[ 7.103799] Sending DHCP requests ., OK <6>[ 7.208236] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.16 <6>[ 7.216395] IP-Config: Complete: <6>[ 7.219934] device=eth0, hwaddr=c8:a0:30:c2:c5:7d, ipaddr=192.168.6.16, mask=255.255.255.0, gw=192.168.6.1 <6>[ 7.230451] host=192.168.6.16, domain=, nis-domain=(none) <6>[ 7.236660] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 7.236695] nameserver0=10.255.253.1 <6>[ 7.249268] clk: Disabling unused clocks <6>[ 7.253988] PM: genpd: Disabling unused power domains <6>[ 7.272396] Freeing unused kernel image (initmem) memory: 2048K <6>[ 7.282121] Run /init as init process <3>[ 7.378642] I/O error, dev mmcblk1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.536733] udevd[103]: starting version 3.2.9 <27>[ 7.553556] udevd[103]: specified user 'tss' unknown <27>[ 7.559498] udevd[103]: specified group 'tss' unknown <30>[ 7.568971] udevd[104]: starting eudev-3.2.9 <3>[ 8.124229] I/O error, dev mmcblk1, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 8.857596] I/O error, dev mmcblk1, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 9.605127] I/O error, dev mmcblk1, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <4>[ 9.629101] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 9.671367] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 9.814091] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 9.819768] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 9.977023] tda998x 0-0070: found TDA19988 <6>[ 10.024285] hub 1-0:1.0: USB hub found <6>[ 10.044636] hub 1-0:1.0: 1 port detected <3>[ 10.366061] I/O error, dev mmcblk1, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <6>[ 10.994068] usb 1-1: new low-speed USB device number 2 using musb-hdrc <3>[ 11.134513] I/O error, dev mmcblk1, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 11.144741] usb 1-1: device descriptor read/64, error -71 <3>[ 11.383869] usb 1-1: device descriptor read/64, error -71 <6>[ 11.623847] usb 1-1: new low-speed USB device number 3 using musb-hdrc <3>[ 11.753936] usb 1-1: device descriptor read/64, error -71 <3>[ 11.902924] I/O error, dev mmcblk1, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 12.033869] usb 1-1: device descriptor read/64, error -71 <6>[ 12.143998] usb usb1-port1: attempt power cycle <6>[ 12.323856] usb 1-1: new low-speed USB device number 4 using musb-hdrc <3>[ 12.671351] I/O error, dev mmcblk1, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 12.680323] Buffer I/O error on dev mmcblk1, logical block 0, async page read <6>[ 12.873857] usb 1-1: new low-speed USB device number 5 using musb-hdrc <3>[ 15.817533] I/O error, dev mmcblk1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 16.585961] I/O error, dev mmcblk1, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 17.354413] I/O error, dev mmcblk1, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 18.122780] I/O error, dev mmcblk1, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 18.861224] I/O error, dev mmcblk1, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 19.629615] I/O error, dev mmcblk1, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 20.397998] I/O error, dev mmcblk1, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 21.166427] I/O error, dev mmcblk1, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 21.175375] Buffer I/O error on dev mmcblk1, logical block 0, async page read <6>[ 21.183008] mmcblk1: unable to read partition table <6>[ 21.190843] mmcblk1boot0: mmc1:0001 MMC02G 1.00 MiB <6>[ 21.200869] mmcblk1boot1: mmc1:0001 MMC02G 1.00 MiB <6>[ 21.211977] mmcblk1rpmb: mmc1:0001 MMC02G 128 KiB, chardev (236:0) <3>[ 26.009738] I/O error, dev mmcblk1, sector 3751808 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 <3>[ 26.749118] I/O error, dev mmcblk1, sector 3751809 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 <3>[ 27.518447] I/O error, dev mmcblk1, sector 3751810 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 <3>[ 28.287773] I/O error, dev mmcblk1, sector 3751811 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 <3>[ 29.057120] I/O error, dev mmcblk1, sector 3751812 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 <3>[ 29.826453] I/O error, dev mmcblk1, sector 3751813 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 <3>[ 30.565740] I/O error, dev mmcblk1, sector 3751814 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 <3>[ 31.305029] I/O error, dev mmcblk1, sector 3751815 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 <3>[ 34.443506] I/O error, dev mmcblk1, sector 3751808 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 35.212849] I/O error, dev mmcblk1, sector 3751809 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 35.982016] I/O error, dev mmcblk1, sector 3751810 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 36.720993] I/O error, dev mmcblk1, sector 3751811 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 37.490335] I/O error, dev mmcblk1, sector 3751812 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 38.259337] I/O error, dev mmcblk1, sector 3751813 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 udevadm settle failed done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <3>[ 38.993578] I/O error, dev mmcblk1, sector 3751814 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-973344/environment . /lava-973344/environment / # /lava-973344/bin/lava-test-runner /lava-973344/0 /lava-973344/bin/lava-test-runner /lava-973344/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-973344/0/tests/0_dmesg + cat uuid + UUID=973344_1.5.2.4.1 <8>[ 39.640775] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <3>[ 39.727806] I/O error, dev mmcblk1, sector 3751815 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 <3>[ 39.737220] Buffer I/O error on dev mmcblk1, logical block 468976, async page read <4>[ 39.753363] mmc1: unexpected status 0x2000900 after switch <8>[ 39.762894] <8>[ 39.821070] <8>[ 39.879441] + set +x <8>[ 39.890577] / #